mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-11-30 08:24:11 +01:00
ad7a4cded0
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2428 ebee16cc-31ac-478f-84a7-5cbb03baadba
324 lines
14 KiB
C
324 lines
14 KiB
C
/**
|
||
******************************************************************************
|
||
*
|
||
* @file pios_board.h
|
||
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
||
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
|
||
* @see The GNU Public License (GPL) Version 3
|
||
*
|
||
*****************************************************************************/
|
||
/*
|
||
* This program is free software; you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License as published by
|
||
* the Free Software Foundation; either version 3 of the License, or
|
||
* (at your option) any later version.
|
||
*
|
||
* This program is distributed in the hope that it will be useful, but
|
||
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
||
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
||
* for more details.
|
||
*
|
||
* You should have received a copy of the GNU General Public License along
|
||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
*/
|
||
|
||
|
||
#ifndef STM32103CB_AHRS_H_
|
||
#define STM32103CB_AHRS_H_
|
||
|
||
//------------------------
|
||
// Timers and Channels Used
|
||
//------------------------
|
||
/*
|
||
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
|
||
------+-----------+-----------+-----------+----------
|
||
TIM1 | Servo 4 | | |
|
||
TIM2 | RC In 5 | RC In 6 | Servo 6 |
|
||
TIM3 | Servo 5 | RC In 2 | RC In 3 | RC In 4
|
||
TIM4 | RC In 1 | Servo 3 | Servo 2 | Servo 1
|
||
------+-----------+-----------+-----------+----------
|
||
*/
|
||
|
||
//------------------------
|
||
// DMA Channels Used
|
||
//------------------------
|
||
/* Channel 1 - */
|
||
/* Channel 2 - */
|
||
/* Channel 3 - */
|
||
/* Channel 4 - */
|
||
/* Channel 5 - */
|
||
/* Channel 6 - */
|
||
/* Channel 7 - */
|
||
/* Channel 8 - */
|
||
/* Channel 9 - */
|
||
/* Channel 10 - */
|
||
/* Channel 11 - */
|
||
/* Channel 12 - */
|
||
|
||
|
||
//------------------------
|
||
// BOOTLOADER_SETTINGS
|
||
//------------------------
|
||
#define FUNC_ID 2
|
||
#define HW_VERSION 69
|
||
#define BOOTLOADER_VERSION 0
|
||
#define MEM_SIZE 0x20000 //128K
|
||
#define SIZE_OF_DESCRIPTION 100
|
||
#define START_OF_USER_CODE (uint32_t)0x08002000
|
||
#define SIZE_OF_CODE (uint32_t)(MEM_SIZE-(START_OF_USER_CODE-0x08000000)-SIZE_OF_DESCRIPTION)
|
||
#ifdef STM32F10X_HD
|
||
#define HW_TYPE 0 //0=high_density 1=medium_density;
|
||
#elif STM32F10X_MD
|
||
#define HW_TYPE 1 //0=high_density 1=medium_density;
|
||
#endif
|
||
#define BOARD_READABLE TRUE
|
||
#define BOARD_WRITABLA TRUE
|
||
#define MAX_DEL_RETRYS 3
|
||
|
||
|
||
//------------------------
|
||
// WATCHDOG_SETTINGS
|
||
//------------------------
|
||
#define PIOS_WATCHDOG_TIMEOUT 250
|
||
#define PIOS_WDG_REGISTER BKP_DR4
|
||
#define PIOS_WDG_ACTUATOR 0x0001
|
||
#define PIOS_WDG_STABILIZATION 0x0002
|
||
#define PIOS_WDG_AHRS 0x0004
|
||
#define PIOS_WDG_MANUAL 0x0008
|
||
|
||
//------------------------
|
||
// PIOS_LED
|
||
//------------------------
|
||
#define PIOS_LED_LED1_GPIO_PORT GPIOA
|
||
#define PIOS_LED_LED1_GPIO_PIN GPIO_Pin_6
|
||
#define PIOS_LED_LED1_GPIO_CLK RCC_APB2Periph_GPIOA
|
||
#define PIOS_LED_NUM 1
|
||
#define PIOS_LED_PORTS { PIOS_LED_LED1_GPIO_PORT }
|
||
#define PIOS_LED_PINS { PIOS_LED_LED1_GPIO_PIN }
|
||
#define PIOS_LED_CLKS { PIOS_LED_LED1_GPIO_CLK }
|
||
|
||
//-------------------------
|
||
// Delay Timer
|
||
//-------------------------
|
||
#define PIOS_DELAY_TIMER TIM2
|
||
#define PIOS_DELAY_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM2, ENABLE)
|
||
|
||
//-------------------------
|
||
// System Settings
|
||
//-------------------------
|
||
#define PIOS_MASTER_CLOCK 72000000
|
||
#define PIOS_PERIPHERAL_CLOCK (PIOS_MASTER_CLOCK / 2)
|
||
#if defined(USE_BOOTLOADER)
|
||
#define PIOS_NVIC_VECTTAB_FLASH (START_OF_USER_CODE)
|
||
#else
|
||
#define PIOS_NVIC_VECTTAB_FLASH ((uint32_t)0x08000000)
|
||
#endif
|
||
|
||
//-------------------------
|
||
// Interrupt Priorities
|
||
//-------------------------
|
||
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
|
||
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
|
||
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
|
||
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
|
||
|
||
//------------------------
|
||
// PIOS_I2C
|
||
// See also pios_board.c
|
||
//------------------------
|
||
#define PIOS_I2C_MAIN_ADAPTER 0
|
||
|
||
//-------------------------
|
||
// SPI
|
||
//
|
||
// See also pios_board.c
|
||
//-------------------------
|
||
#define PIOS_SPI_OP 0
|
||
|
||
//-------------------------
|
||
// PIOS_USART
|
||
//-------------------------
|
||
#define PIOS_USART_RX_BUFFER_SIZE 256
|
||
#define PIOS_USART_TX_BUFFER_SIZE 256
|
||
#define PIOS_USART_BAUDRATE 57600
|
||
#define PIOS_COM_AUX 0
|
||
#define PIOS_COM_DEBUG PIOS_COM_AUX
|
||
|
||
#define PIOS_COM_TELEM_RF 0
|
||
#define PIOS_COM_GPS 1
|
||
#define PIOS_COM_TELEM_USB 2
|
||
|
||
//-------------------------
|
||
// ADC
|
||
// PIOS_ADC_PinGet(0) = Accel Z
|
||
// PIOS_ADC_PinGet(2) = Accel Y
|
||
// PIOS_ADC_PinGet(4) = Accel X
|
||
// PIOS_ADC_PinGet(1) = Gyro X
|
||
// PIOS_ADC_PinGet(3) = Gyro Y
|
||
// PIOS_ADC_PinGet(5) = Gyro Z
|
||
// PIOS_ADC_PinGet(6) = XY Temp
|
||
// PIOS_ADC_PinGet(7) = Z Temp
|
||
//-------------------------
|
||
//#define PIOS_ADC_OVERSAMPLING_RATE 1
|
||
#define PIOS_ADC_USE_TEMP_SENSOR 1
|
||
#define PIOS_ADC_TEMP_SENSOR_ADC ADC1
|
||
#define PIOS_ADC_TEMP_SENSOR_ADC_CHANNEL 1
|
||
|
||
#define PIOS_ADC_PIN1_GPIO_PORT GPIOA // PA4 (Gyro X)
|
||
#define PIOS_ADC_PIN1_GPIO_PIN GPIO_Pin_4 // ADC12_IN2
|
||
#define PIOS_ADC_PIN1_GPIO_CHANNEL ADC_Channel_1
|
||
#define PIOS_ADC_PIN1_ADC ADC1
|
||
#define PIOS_ADC_PIN1_ADC_NUMBER 2
|
||
|
||
#define PIOS_ADC_PIN2_GPIO_PORT GPIOA // PA5 (Gyro Y)
|
||
#define PIOS_ADC_PIN2_GPIO_PIN GPIO_Pin_5 // ADC123_IN1
|
||
#define PIOS_ADC_PIN2_GPIO_CHANNEL ADC_Channel_0
|
||
#define PIOS_ADC_PIN2_ADC ADC2
|
||
#define PIOS_ADC_PIN2_ADC_NUMBER 1
|
||
|
||
#define PIOS_ADC_PIN3_GPIO_PORT GPIOA // PA3 (Gyro Z)
|
||
#define PIOS_ADC_PIN3_GPIO_PIN GPIO_Pin_3 // ADC12_IN0
|
||
#define PIOS_ADC_PIN3_GPIO_CHANNEL ADC_Channel_1
|
||
#define PIOS_ADC_PIN3_ADC ADC1
|
||
#define PIOS_ADC_PIN3_ADC_NUMBER 2
|
||
|
||
#define PIOS_ADC_NUM_PINS 3
|
||
|
||
#define PIOS_ADC_PORTS { PIOS_ADC_PIN1_GPIO_PORT, PIOS_ADC_PIN2_GPIO_PORT, PIOS_ADC_PIN3_GPIO_PORT }
|
||
#define PIOS_ADC_PINS { PIOS_ADC_PIN1_GPIO_PIN, PIOS_ADC_PIN2_GPIO_PIN, PIOS_ADC_PIN3_GPIO_PIN }
|
||
#define PIOS_ADC_CHANNELS { PIOS_ADC_PIN1_GPIO_CHANNEL, PIOS_ADC_PIN2_GPIO_CHANNEL, PIOS_ADC_PIN3_GPIO_CHANNEL }
|
||
#define PIOS_ADC_MAPPING { PIOS_ADC_PIN1_ADC, PIOS_ADC_PIN2_ADC, PIOS_ADC_PIN3_ADC }
|
||
#define PIOS_ADC_CHANNEL_MAPPING { PIOS_ADC_PIN1_ADC_NUMBER, PIOS_ADC_PIN2_ADC_NUMBER, PIOS_ADC_PIN3_ADC_NUMBER }
|
||
#define PIOS_ADC_NUM_CHANNELS (PIOS_ADC_NUM_PINS + PIOS_ADC_USE_TEMP_SENSOR)
|
||
#define PIOS_ADC_NUM_ADC_CHANNELS 2
|
||
#define PIOS_ADC_USE_ADC2 1
|
||
#define PIOS_ADC_CLOCK_FUNCTION RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1 | RCC_APB2Periph_ADC2, ENABLE)
|
||
#define PIOS_ADC_ADCCLK RCC_PCLK2_Div2
|
||
/* RCC_PCLK2_Div2: ADC clock = PCLK2/2 */
|
||
/* RCC_PCLK2_Div4: ADC clock = PCLK2/4 */
|
||
/* RCC_PCLK2_Div6: ADC clock = PCLK2/6 */
|
||
/* RCC_PCLK2_Div8: ADC clock = PCLK2/8 */
|
||
#define PIOS_ADC_SAMPLE_TIME ADC_SampleTime_239Cycles5
|
||
/* Sample time: */
|
||
/* With an ADCCLK = 14 MHz and a sampling time of 239.5 cycles: */
|
||
/* Tconv = 239.5 + 12.5 = 252 cycles = 18<31>s */
|
||
/* (1 / (ADCCLK / CYCLES)) = Sample Time (<28>S) */
|
||
#define PIOS_ADC_IRQ_PRIO PIOS_IRQ_PRIO_LOW
|
||
|
||
// Currently analog acquistion hard coded at 480 Hz
|
||
// PCKL2 = HCLK / 16
|
||
// ADCCLK = PCLK2 / 2
|
||
#define PIOS_ADC_RATE (72.0e6 / 16 / 2 / 252 / (PIOS_ADC_NUM_PINS / 2))
|
||
#define EKF_RATE (PIOS_ADC_RATE / adc_oversampling / 2)
|
||
|
||
//-------------------------
|
||
// Receiver PWM inputs
|
||
//-------------------------
|
||
#define PIOS_PWM_CH1_GPIO_PORT GPIOA
|
||
#define PIOS_PWM_CH1_PIN GPIO_Pin_9
|
||
#define PIOS_PWM_CH1_TIM_PORT TIM1
|
||
#define PIOS_PWM_CH1_CH TIM_Channel_2
|
||
#define PIOS_PWM_CH1_CCR TIM_IT_CC2
|
||
#define PIOS_PWM_CH2_GPIO_PORT GPIOA
|
||
#define PIOS_PWM_CH2_PIN GPIO_Pin_10
|
||
#define PIOS_PWM_CH2_TIM_PORT TIM1
|
||
#define PIOS_PWM_CH2_CH TIM_Channel_3
|
||
#define PIOS_PWM_CH2_CCR TIM_IT_CC3
|
||
#define PIOS_PWM_CH3_GPIO_PORT GPIOA
|
||
#define PIOS_PWM_CH3_PIN GPIO_Pin_0
|
||
#define PIOS_PWM_CH3_TIM_PORT TIM5
|
||
#define PIOS_PWM_CH3_CH TIM_Channel_1
|
||
#define PIOS_PWM_CH3_CCR TIM_IT_CC1
|
||
#define PIOS_PWM_CH4_GPIO_PORT GPIOA
|
||
#define PIOS_PWM_CH4_PIN GPIO_Pin_8
|
||
#define PIOS_PWM_CH4_TIM_PORT TIM1
|
||
#define PIOS_PWM_CH4_CH TIM_Channel_1
|
||
#define PIOS_PWM_CH4_CCR TIM_IT_CC1
|
||
#define PIOS_PWM_CH5_GPIO_PORT GPIOB
|
||
#define PIOS_PWM_CH5_PIN GPIO_Pin_1
|
||
#define PIOS_PWM_CH5_TIM_PORT TIM3
|
||
#define PIOS_PWM_CH5_CH TIM_Channel_4
|
||
#define PIOS_PWM_CH5_CCR TIM_IT_CC4
|
||
#define PIOS_PWM_CH6_GPIO_PORT GPIOB
|
||
#define PIOS_PWM_CH6_PIN GPIO_Pin_0
|
||
#define PIOS_PWM_CH6_TIM_PORT TIM3
|
||
#define PIOS_PWM_CH6_CH TIM_Channel_3
|
||
#define PIOS_PWM_CH6_CCR TIM_IT_CC3
|
||
#define PIOS_PWM_CH7_GPIO_PORT GPIOB
|
||
#define PIOS_PWM_CH7_PIN GPIO_Pin_4
|
||
#define PIOS_PWM_CH7_TIM_PORT TIM3
|
||
#define PIOS_PWM_CH7_CH TIM_Channel_1
|
||
#define PIOS_PWM_CH7_CCR TIM_IT_CC1
|
||
#define PIOS_PWM_CH8_GPIO_PORT GPIOB
|
||
#define PIOS_PWM_CH8_PIN GPIO_Pin_5
|
||
#define PIOS_PWM_CH8_TIM_PORT TIM3
|
||
#define PIOS_PWM_CH8_CH TIM_Channel_2
|
||
#define PIOS_PWM_CH8_CCR TIM_IT_CC2
|
||
#define PIOS_PWM_GPIO_PORTS { PIOS_PWM_CH1_GPIO_PORT, PIOS_PWM_CH2_GPIO_PORT, PIOS_PWM_CH3_GPIO_PORT, PIOS_PWM_CH4_GPIO_PORT, PIOS_PWM_CH5_GPIO_PORT, PIOS_PWM_CH6_GPIO_PORT, PIOS_PWM_CH7_GPIO_PORT, PIOS_PWM_CH8_GPIO_PORT }
|
||
#define PIOS_PWM_GPIO_PINS { PIOS_PWM_CH1_PIN, PIOS_PWM_CH2_PIN, PIOS_PWM_CH3_PIN, PIOS_PWM_CH4_PIN, PIOS_PWM_CH5_PIN, PIOS_PWM_CH6_PIN, PIOS_PWM_CH7_PIN, PIOS_PWM_CH8_PIN }
|
||
#define PIOS_PWM_TIM_PORTS { PIOS_PWM_CH1_TIM_PORT, PIOS_PWM_CH2_TIM_PORT, PIOS_PWM_CH3_TIM_PORT, PIOS_PWM_CH4_TIM_PORT, PIOS_PWM_CH5_TIM_PORT, PIOS_PWM_CH6_TIM_PORT, PIOS_PWM_CH7_TIM_PORT, PIOS_PWM_CH8_TIM_PORT }
|
||
#define PIOS_PWM_TIM_CHANNELS { PIOS_PWM_CH1_CH, PIOS_PWM_CH2_CH, PIOS_PWM_CH3_CH, PIOS_PWM_CH4_CH, PIOS_PWM_CH5_CH, PIOS_PWM_CH6_CH, PIOS_PWM_CH7_CH, PIOS_PWM_CH8_CH }
|
||
#define PIOS_PWM_TIM_CCRS { PIOS_PWM_CH1_CCR, PIOS_PWM_CH2_CCR, PIOS_PWM_CH3_CCR, PIOS_PWM_CH4_CCR, PIOS_PWM_CH5_CCR, PIOS_PWM_CH6_CCR, PIOS_PWM_CH7_CCR, PIOS_PWM_CH8_CCR }
|
||
#define PIOS_PWM_TIMS { TIM1, TIM3, TIM5 }
|
||
#define PIOS_PWM_TIM_IRQS { TIM1_CC_IRQn, TIM3_IRQn, TIM5_IRQn }
|
||
#define PIOS_PWM_NUM_INPUTS 8
|
||
#define PIOS_PWM_NUM_TIMS 3
|
||
#define PIOS_PWM_SUPV_ENABLED 0
|
||
#define PIOS_PWM_SUPV_TIMER TIM6
|
||
#define PIOS_PWM_SUPV_TIMER_RCC_FUNC RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM6, ENABLE)
|
||
#define PIOS_PWM_SUPV_HZ 25
|
||
#define PIOS_PWM_SUPV_IRQ_CHANNEL TIM6_IRQn
|
||
#define PIOS_PWM_SUPV_IRQ_FUNC void TIM6_IRQHandler(void)
|
||
|
||
|
||
//-------------------------
|
||
// Servo outputs
|
||
//-------------------------
|
||
#define PIOS_SERVO_GPIO_PORT_1TO4 GPIOB
|
||
#define PIOS_SERVO_GPIO_PIN_1 GPIO_Pin_6
|
||
#define PIOS_SERVO_GPIO_PIN_2 GPIO_Pin_7
|
||
#define PIOS_SERVO_GPIO_PIN_3 GPIO_Pin_8
|
||
#define PIOS_SERVO_GPIO_PIN_4 GPIO_Pin_9
|
||
#define PIOS_SERVO_GPIO_PORT_5TO8 GPIOC
|
||
#define PIOS_SERVO_GPIO_PIN_5 GPIO_Pin_6
|
||
#define PIOS_SERVO_GPIO_PIN_6 GPIO_Pin_7
|
||
#define PIOS_SERVO_GPIO_PIN_7 GPIO_Pin_8
|
||
#define PIOS_SERVO_GPIO_PIN_8 GPIO_Pin_9
|
||
#define PIOS_SERVO_NUM_OUTPUTS 8
|
||
#define PIOS_SERVO_NUM_TIMERS PIOS_SERVO_NUM_OUTPUTS
|
||
#define PIOS_SERVO_UPDATE_HZ 50
|
||
#define PIOS_SERVOS_INITIAL_POSITION 0 /* dont want to start motors, have no pulse till settings loaded */
|
||
|
||
//-------------------------
|
||
// GPIO
|
||
//-------------------------
|
||
#define PIOS_GPIO_1_PORT GPIOC
|
||
#define PIOS_GPIO_1_PIN GPIO_Pin_0
|
||
#define PIOS_GPIO_1_GPIO_CLK RCC_APB2Periph_GPIOC
|
||
#define PIOS_GPIO_2_PORT GPIOC
|
||
#define PIOS_GPIO_2_PIN GPIO_Pin_1
|
||
#define PIOS_GPIO_2_GPIO_CLK RCC_APB2Periph_GPIOC
|
||
#define PIOS_GPIO_3_PORT GPIOC
|
||
#define PIOS_GPIO_3_PIN GPIO_Pin_2
|
||
#define PIOS_GPIO_3_GPIO_CLK RCC_APB2Periph_GPIOC
|
||
#define PIOS_GPIO_4_PORT GPIOD
|
||
#define PIOS_GPIO_4_PIN GPIO_Pin_2
|
||
#define PIOS_GPIO_4_GPIO_CLK RCC_APB2Periph_GPIOD
|
||
#define PIOS_GPIO_PORTS { PIOS_GPIO_1_PORT, PIOS_GPIO_2_PORT, PIOS_GPIO_3_PORT, PIOS_GPIO_4_PORT }
|
||
#define PIOS_GPIO_PINS { PIOS_GPIO_1_PIN, PIOS_GPIO_2_PIN, PIOS_GPIO_3_PIN, PIOS_GPIO_4_PIN }
|
||
#define PIOS_GPIO_CLKS { PIOS_GPIO_1_GPIO_CLK, PIOS_GPIO_2_GPIO_CLK, PIOS_GPIO_3_GPIO_CLK, PIOS_GPIO_4_GPIO_CLK }
|
||
#define PIOS_GPIO_NUM 4
|
||
|
||
//-------------------------
|
||
// USB
|
||
//-------------------------
|
||
#define PIOS_USB_ENABLED 1
|
||
#define PIOS_USB_DETECT_GPIO_PORT GPIOC
|
||
#define PIOS_USB_DETECT_GPIO_PIN GPIO_Pin_15
|
||
#define PIOS_USB_DETECT_EXTI_LINE EXTI_Line15
|
||
#define PIOS_IRQ_USB_PRIORITY PIOS_IRQ_PRIO_MID
|
||
#define PIOS_USB_RX_BUFFER_SIZE 256
|
||
#define PIOS_USB_TX_BUFFER_SIZE 256
|
||
#endif /* STM32103CB_AHRS_H_ */
|