1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-01 09:24:10 +01:00
LibrePilot/flight/CopterControl/System/inc/pios_config.h
Stacey Sheldon b94f4b49a4 usb: major refactoring of USB descriptors, CDC and HID
Summary of changes:
 * USB CDC and HID drivers are completely split apart.
   * This will allow different max buffer sizes for HID and CDC.
 * USB descriptors have been overhauled:
   * Proper structs/macros/enums declared for USB (see pios_usb_defs.h)
   * Two common descriptor definitions.  One for HID+CDC another for HID only.
     See pios_usb_desc_{hid_cdc,hid_only}.c for details.
   * Long standing bugs in OP USB descriptors became much more obvious with the
     new struct definitions.
   * Board specific USB initialization is now in pios_usb_board_data.h in each build target.
   * Definition of USB descriptors is now entirely indpendent of STM32 libs.
     Glue into STM32 libs is provided by pios_usbhook.c.
 * Removed a lot of stale/irrelevant USB #defines throughout the tree.
 * Improved naming consistency throughout USB code:
   * PIOS_USB_HID_* now refers to the HID endpoint code.
   * PIOS_USB_CDC_* now refers to the CDC endpoint code.
   * PIOS_USB_* now refers to the low-level USB code.
   * PIOS_USB_BOARD_* now refers to board-specific USB data
   * PIOS_USBHOOK_* is glue between PIOS and STM32 USB libs.
   * struct usb_* and enum usb_* and USB_* and HID_* are all types from the USB spec.
 * Shrunk the buffer size on the CDC call mgmt endpoint to save some RAM.
 * Made a few more USB related variables static to save some RAM.
2012-01-02 14:27:06 -05:00

115 lines
3.4 KiB
C

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file pios_config.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief PiOS configuration header.
* Central compile time config for the project.
* In particular, pios_config.h is where you define which PiOS libraries
* and features are included in the firmware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_CONFIG_H
#define PIOS_CONFIG_H
/* Enable/Disable PiOS Modules */
#define PIOS_INCLUDE_ADC
#define PIOS_INCLUDE_DELAY
#if defined(USE_I2C)
#define PIOS_INCLUDE_I2C
#define PIOS_INCLUDE_I2C_ESC
#endif
#define PIOS_INCLUDE_IRQ
#define PIOS_INCLUDE_LED
#define PIOS_INCLUDE_RCVR
/* Supported receiver interfaces */
#define PIOS_INCLUDE_DSM
#define PIOS_INCLUDE_SBUS
#define PIOS_INCLUDE_PPM
#define PIOS_INCLUDE_PWM
#define PIOS_INCLUDE_GCSRCVR
/* Supported USART-based PIOS modules */
#define PIOS_INCLUDE_TELEMETRY_RF
#define PIOS_INCLUDE_GPS
#define PIOS_GPS_MINIMAL
#define PIOS_INCLUDE_SERVO
#define PIOS_INCLUDE_SPI
#define PIOS_INCLUDE_SYS
#define PIOS_INCLUDE_USART
#define PIOS_INCLUDE_USB
#define PIOS_INCLUDE_USB_HID
#define PIOS_INCLUDE_USB_CDC
#define PIOS_INCLUDE_COM
#define PIOS_INCLUDE_SETTINGS
#define PIOS_INCLUDE_FREERTOS
#define PIOS_INCLUDE_GPIO
#define PIOS_INCLUDE_EXTI
#define PIOS_INCLUDE_RTC
#define PIOS_INCLUDE_WDG
#define PIOS_INCLUDE_BL_HELPER
#define PIOS_INCLUDE_ADXL345
#define PIOS_INCLUDE_FLASH
/* A really shitty setting saving implementation */
#define PIOS_INCLUDE_FLASH_SECTOR_SETTINGS
/* Defaults for Logging */
#define LOG_FILENAME "PIOS.LOG"
#define STARTUP_LOG_ENABLED 1
/* Alarm Thresholds */
#define HEAP_LIMIT_WARNING 220
#define HEAP_LIMIT_CRITICAL 40
#define IRQSTACK_LIMIT_WARNING 100
#define IRQSTACK_LIMIT_CRITICAL 60
#define CPULOAD_LIMIT_WARNING 85
#define CPULOAD_LIMIT_CRITICAL 95
/* Task stack sizes */
#define PIOS_ACTUATOR_STACK_SIZE 1020
#define PIOS_MANUAL_STACK_SIZE 724
#define PIOS_SYSTEM_STACK_SIZE 460
#define PIOS_STABILIZATION_STACK_SIZE 524
#define PIOS_TELEM_STACK_SIZE 500
#define PIOS_EVENTDISPATCHER_STACK_SIZE 130
#define IDLE_COUNTS_PER_SEC_AT_NO_LOAD 1995998
//#define PIOS_QUATERNION_STABILIZATION
// This can't be too high to stop eventdispatcher thread overflowing
#define PIOS_EVENTDISAPTCHER_QUEUE 10
/* PIOS Initcall infrastructure */
#define PIOS_INCLUDE_INITCALL
#endif /* PIOS_CONFIG_H */
/**
* @}
* @}
*/