mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-11-29 07:24:13 +01:00
a2333c259f
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3165 ebee16cc-31ac-478f-84a7-5cbb03baadba
29 lines
1.4 KiB
Plaintext
29 lines
1.4 KiB
Plaintext
** Introduction **
|
|
|
|
These are all the hardware files for the OpenPilot CopterControl, they are complete with all files needed to
|
|
replicate this device easily. This includes all Gerber files, NC Drill files, a detailed BOM with Digikey
|
|
part numbers, all Altium version 9 files, PDF schematic and detailed assembly sheets including 3D artwork.
|
|
|
|
The Gerber files included have also been used to produce our production boards.
|
|
|
|
|
|
** License **
|
|
|
|
These files are licensed under Creative Commons BY-NC-SA 3.0 license. This licenses does NOT allow commercial
|
|
use of these designs or designs derived from them. This license also requires that credit is given, in this
|
|
case the OpenPilot logo should be retained at the same size as on the included files on any board produced or
|
|
hardware derived from this design.
|
|
|
|
For more details, please see: http://creativecommons.org/licenses/by-nc-sa/3.0/au/deed.en
|
|
|
|
OpenPilot is a non-commercial project and is releasing these files to share with the wider community,
|
|
please respect this and play fair. If there are any questions or items that need clarifying please contact
|
|
one of the OpenPilot forum administrators.
|
|
|
|
|
|
** Credits **
|
|
|
|
David Ankers: concept, design and board creation.
|
|
James Cotton: Firmware development, 3C algorythm, testing and advice.
|
|
Cathy Moss: Design review, for being generally awesome and having patience for David's questions.
|