1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
LibrePilot/flight/targets/boards/revonano/firmware/pios_board.c
2015-12-26 13:08:07 +01:00

865 lines
29 KiB
C

/**
******************************************************************************
* @file pios_board.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011.
* @author PhoenixPilot, http://github.com/PhoenixPilot, Copyright (C) 2012
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
* @brief Defines board specific static initializers for hardware for the revomini board.
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "inc/openpilot.h"
#include <pios_board_info.h>
#include <uavobjectsinit.h>
#include <hwsettings.h>
#include <manualcontrolsettings.h>
#include <oplinksettings.h>
#include <oplinkstatus.h>
#include <oplinkreceiver.h>
#include <pios_oplinkrcvr_priv.h>
#include <taskinfo.h>
#include <pios_ws2811.h>
#include <sanitycheck.h>
#include <actuatorsettings.h>
#ifdef PIOS_INCLUDE_INSTRUMENTATION
#include <pios_instrumentation.h>
#endif
/*
* Pull in the board-specific static HW definitions.
* Including .c files is a bit ugly but this allows all of
* the HW definitions to be const and static to limit their
* scope.
*
* NOTE: THIS IS THE ONLY PLACE THAT SHOULD EVER INCLUDE THIS FILE
*/
#include "../board_hw_defs.c"
static SystemAlarmsExtendedAlarmStatusOptions RevoNanoConfigHook();
static void ActuatorSettingsUpdatedCb(UAVObjEvent *ev);
/**
* Sensor configurations
*/
#if defined(PIOS_INCLUDE_ADC)
#include "pios_adc_priv.h"
void PIOS_ADC_DMC_irq_handler(void);
void DMA2_Stream4_IRQHandler(void) __attribute__((alias("PIOS_ADC_DMC_irq_handler")));
struct pios_adc_cfg pios_adc_cfg = {
.adc_dev = ADC1,
.dma = {
.irq = {
.flags = (DMA_FLAG_TCIF4 | DMA_FLAG_TEIF4 | DMA_FLAG_HTIF4),
.init = {
.NVIC_IRQChannel = DMA2_Stream4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA2_Stream4,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t)&ADC1->DR
},
}
},
.half_flag = DMA_IT_HTIF4,
.full_flag = DMA_IT_TCIF4,
};
void PIOS_ADC_DMC_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_ADC_DMA_Handler();
}
#endif /* if defined(PIOS_INCLUDE_ADC) */
/**
* Configuration for the MS5611 chip
*/
#if defined(PIOS_INCLUDE_MS5611)
#include "pios_ms5611.h"
static const struct pios_ms5611_cfg pios_ms5611_cfg = {
.oversampling = MS5611_OSR_4096,
};
#endif /* PIOS_INCLUDE_MS5611 */
/**
* Configuration for the MPU9250 chip
*/
#if defined(PIOS_INCLUDE_MPU9250)
#include "pios_mpu9250.h"
#include "pios_mpu9250_config.h"
static const struct pios_exti_cfg pios_exti_mpu9250_cfg __exti_config = {
.vector = PIOS_MPU9250_IRQHandler,
.line = EXTI_Line15,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI15_10_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line15, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_mpu9250_cfg pios_mpu9250_cfg = {
.exti_cfg = &pios_exti_mpu9250_cfg,
.Fifo_store = 0,
// Clock at 8 khz
.Smpl_rate_div_no_dlp = 0,
// with dlp on output rate is 1000Hz
.Smpl_rate_div_dlp = 0,
.interrupt_cfg = PIOS_MPU9250_INT_CLR_ANYRD, // | PIOS_MPU9250_INT_LATCH_EN,
.interrupt_en = PIOS_MPU9250_INTEN_DATA_RDY,
.User_ctl = PIOS_MPU9250_USERCTL_DIS_I2C | PIOS_MPU9250_USERCTL_I2C_MST_EN,
.Pwr_mgmt_clk = PIOS_MPU9250_PWRMGMT_PLL_Z_CLK,
.accel_range = PIOS_MPU9250_ACCEL_8G,
.gyro_range = PIOS_MPU9250_SCALE_2000_DEG,
.filter = PIOS_MPU9250_LOWPASS_256_HZ,
.orientation = PIOS_MPU9250_TOP_180DEG,
.fast_prescaler = PIOS_SPI_PRESCALER_4,
.std_prescaler = PIOS_SPI_PRESCALER_64,
.max_downsample = 26,
};
#endif /* PIOS_INCLUDE_MPU9250 */
/* One slot per selectable receiver group.
* eg. PWM, PPM, GCS, SPEKTRUM1, SPEKTRUM2, SBUS
* NOTE: No slot in this map for NONE.
*/
uint32_t pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_NONE];
#define PIOS_COM_TELEM_RF_RX_BUF_LEN 512
#define PIOS_COM_TELEM_RF_TX_BUF_LEN 512
#define PIOS_COM_GPS_RX_BUF_LEN 128
#define PIOS_COM_GPS_TX_BUF_LEN 32
#define PIOS_COM_TELEM_USB_RX_BUF_LEN 65
#define PIOS_COM_TELEM_USB_TX_BUF_LEN 65
#define PIOS_COM_BRIDGE_RX_BUF_LEN 65
#define PIOS_COM_BRIDGE_TX_BUF_LEN 12
#define PIOS_COM_RFM22B_RF_RX_BUF_LEN 512
#define PIOS_COM_RFM22B_RF_TX_BUF_LEN 512
#define PIOS_COM_HKOSD_RX_BUF_LEN 22
#define PIOS_COM_HKOSD_TX_BUF_LEN 22
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
#define PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN 40
uint32_t pios_com_debug_id;
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
uint32_t pios_com_gps_id = 0;
uint32_t pios_com_telem_usb_id = 0;
uint32_t pios_com_telem_rf_id = 0;
uint32_t pios_com_rf_id = 0;
uint32_t pios_com_bridge_id = 0;
uint32_t pios_com_overo_id = 0;
uint32_t pios_com_hkosd_id = 0;
uint32_t pios_com_vcp_id = 0;
uintptr_t pios_uavo_settings_fs_id;
uintptr_t pios_user_fs_id;
/*
* Setup a com port based on the passed cfg, driver and buffer sizes. tx size of -1 make the port rx only
*/
static void PIOS_Board_configure_com(const struct pios_usart_cfg *usart_port_cfg, size_t rx_buf_len, size_t tx_buf_len,
const struct pios_com_driver *com_driver, uint32_t *pios_com_id)
{
uint32_t pios_usart_id;
if (PIOS_USART_Init(&pios_usart_id, usart_port_cfg)) {
PIOS_Assert(0);
}
uint8_t *rx_buffer = (uint8_t *)pios_malloc(rx_buf_len);
PIOS_Assert(rx_buffer);
if (tx_buf_len != (size_t)-1) { // this is the case for rx/tx ports
uint8_t *tx_buffer = (uint8_t *)pios_malloc(tx_buf_len);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id,
rx_buffer, rx_buf_len,
tx_buffer, tx_buf_len)) {
PIOS_Assert(0);
}
} else { // rx only port
if (PIOS_COM_Init(pios_com_id, com_driver, pios_usart_id,
rx_buffer, rx_buf_len,
NULL, 0)) {
PIOS_Assert(0);
}
}
}
static void PIOS_Board_configure_dsm(const struct pios_usart_cfg *pios_usart_dsm_cfg, const struct pios_dsm_cfg *pios_dsm_cfg,
const struct pios_com_driver *usart_com_driver,
ManualControlSettingsChannelGroupsOptions channelgroup, uint8_t *bind)
{
uint32_t pios_usart_dsm_id;
if (PIOS_USART_Init(&pios_usart_dsm_id, pios_usart_dsm_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_id;
if (PIOS_DSM_Init(&pios_dsm_id, pios_dsm_cfg, usart_com_driver,
pios_usart_dsm_id, *bind)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_rcvr_id;
if (PIOS_RCVR_Init(&pios_dsm_rcvr_id, &pios_dsm_rcvr_driver, pios_dsm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[channelgroup] = pios_dsm_rcvr_id;
}
static void PIOS_Board_configure_pwm(const struct pios_pwm_cfg *pwm_cfg)
{
/* Set up the receiver port. Later this should be optional */
uint32_t pios_pwm_id;
PIOS_PWM_Init(&pios_pwm_id, pwm_cfg);
uint32_t pios_pwm_rcvr_id;
if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id;
}
static void PIOS_Board_configure_ppm(const struct pios_ppm_cfg *ppm_cfg)
{
uint32_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, ppm_cfg);
uint32_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
/**
* PIOS_Board_Init()
* initializes all the core subsystems on this specific hardware
* called from System/openpilot.c
*/
#include <pios_board_info.h>
void PIOS_Board_Init(void)
{
/* Delay system */
PIOS_DELAY_Init();
const struct pios_board_info *bdinfo = &pios_board_info_blob;
#if defined(PIOS_INCLUDE_LED)
const struct pios_gpio_cfg *led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
#ifdef PIOS_INCLUDE_INSTRUMENTATION
PIOS_Instrumentation_Init(PIOS_INSTRUMENTATION_MAX_COUNTERS);
#endif
/* Set up the SPI interface to the gyro/acelerometer */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if false
/* Set up the SPI interface to the flash and rfm22b */
if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
#endif
#ifdef PIOS_INCLUDE_I2C
if (PIOS_I2C_Init(&pios_i2c_pressure_adapter_id, &pios_i2c_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
#endif
#if defined(PIOS_INCLUDE_FLASH)
/* Connect flash to the appropriate interface and configure it */
uintptr_t flash_id = 0;
// Initialize the external USER flash
if (PIOS_Flash_EEPROM_Init(&flash_id, &flash_main_chip_cfg, pios_i2c_pressure_adapter_id, 0x50)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_FLASHFS_Init(&pios_uavo_settings_fs_id, &flash_main_fs_cfg, &pios_EEPROM_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* if defined(PIOS_INCLUDE_FLASH) */
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
/* IAP System Setup */
PIOS_IAP_Init();
// check for safe mode commands from gcs
if (PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
PIOS_IAP_WriteBootCmd(0, 0);
PIOS_IAP_WriteBootCmd(1, 0);
PIOS_IAP_WriteBootCmd(2, 0);
}
#ifdef PIOS_INCLUDE_WDG
PIOS_WDG_Init();
#endif
/* Initialize the task monitor */
if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
PIOS_Assert(0);
}
/* Initialize the delayed callback library */
PIOS_CALLBACKSCHEDULER_Initialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
HwSettingsInitialize();
#if defined(PIOS_INCLUDE_RFM22B)
OPLinkSettingsInitialize();
OPLinkStatusInitialize();
#endif /* PIOS_INCLUDE_RFM22B */
/* Initialize the alarms library */
AlarmsInitialize();
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_2_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_5_cfg);
PIOS_TIM_InitClock(&tim_9_cfg);
PIOS_TIM_InitClock(&tim_10_cfg);
PIOS_TIM_InitClock(&tim_11_cfg);
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hwsettings to defaults */
HwSettingsSetDefaults(HwSettingsHandle(), 0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
// PIOS_IAP_Init();
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uint32_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hwsettings_usb_vcpport;
/* Configure the USB VCP port */
HwSettingsUSB_VCPPortGet(&hwsettings_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hwsettings_usb_vcpport = HWSETTINGS_USB_VCPPORT_DISABLED;
}
uint32_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint32_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hwsettings_usb_vcpport) {
case HWSETTINGS_USB_VCPPORT_DISABLED:
break;
case HWSETTINGS_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
NULL, 0,
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hwsettings_usb_hidport;
HwSettingsUSB_HIDPortGet(&hwsettings_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hwsettings_usb_hidport = HWSETTINGS_USB_HIDPORT_DISABLED;
}
switch (hwsettings_usb_hidport) {
case HWSETTINGS_USB_HIDPORT_DISABLED:
break;
case HWSETTINGS_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure IO ports */
uint8_t hwsettings_DSMxBind;
HwSettingsDSMxBindGet(&hwsettings_DSMxBind);
/* Configure main USART port */
uint8_t hwsettings_mainport;
HwSettingsRM_MainPortGet(&hwsettings_mainport);
switch (hwsettings_mainport) {
case HWSETTINGS_RM_MAINPORT_DISABLED:
break;
case HWSETTINGS_RM_MAINPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RM_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_RM_MAINPORT_SBUS:
#if defined(PIOS_INCLUDE_SBUS)
{
uint32_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_main_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif
break;
case HWSETTINGS_RM_MAINPORT_JETIEXBUS:
#if defined(PIOS_INCLUDE_EXBUS)
{
uint32_t pios_usart_exbus_id;
if (PIOS_USART_Init(&pios_usart_exbus_id, &pios_usart_exbus_main_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_exbus_id;
if (PIOS_EXBUS_Init(&pios_exbus_id, &pios_usart_com_driver, pios_usart_exbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_exbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_exbus_rcvr_id, &pios_exbus_rcvr_driver, pios_exbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_JETIEXBUSMAINPORT] = pios_exbus_rcvr_id;
}
#endif /* PIOS_INCLUDE_EXBUS */
break;
case HWSETTINGS_RM_MAINPORT_DSM:
{
// Force binding to zero on the main port
hwsettings_DSMxBind = 0;
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_main_cfg, &pios_dsm_main_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
}
break;
case HWSETTINGS_RM_MAINPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWSETTINGS_RM_MAINPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RM_MAINPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_main_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
} /* hwsettings_rm_mainport */
if (hwsettings_mainport != HWSETTINGS_RM_MAINPORT_SBUS) {
GPIO_Init(pios_sbus_cfg.inv.gpio, &pios_sbus_cfg.inv.init);
GPIO_WriteBit(pios_sbus_cfg.inv.gpio, pios_sbus_cfg.inv.init.GPIO_Pin, pios_sbus_cfg.gpio_inv_disable);
}
/* Configure FlexiPort */
uint8_t hwsettings_flexiport;
HwSettingsRM_FlexiPortGet(&hwsettings_flexiport);
switch (hwsettings_flexiport) {
case HWSETTINGS_RM_FLEXIPORT_DISABLED:
break;
case HWSETTINGS_RM_FLEXIPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RM_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
break;
case HWSETTINGS_RM_FLEXIPORT_GPS:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_RM_FLEXIPORT_DSM:
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_flexi_cfg, &pios_dsm_flexi_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RM_FLEXIPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWSETTINGS_RM_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RM_FLEXIPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_flexi_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
case HWSETTINGS_RM_FLEXIPORT_SRXL:
#if defined(PIOS_INCLUDE_SRXL)
{
uint32_t pios_usart_srxl_id;
if (PIOS_USART_Init(&pios_usart_srxl_id, &pios_usart_srxl_flexi_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_srxl_id;
if (PIOS_SRXL_Init(&pios_srxl_id, &pios_usart_com_driver, pios_usart_srxl_id)) {
PIOS_Assert(0);
}
uint32_t pios_srxl_rcvr_id;
if (PIOS_RCVR_Init(&pios_srxl_rcvr_id, &pios_srxl_rcvr_driver, pios_srxl_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SRXL] = pios_srxl_rcvr_id;
}
#endif
break;
case HWSETTINGS_RM_FLEXIPORT_JETIEXBUS:
#if defined(PIOS_INCLUDE_EXBUS)
{
uint32_t pios_usart_exbus_id;
if (PIOS_USART_Init(&pios_usart_exbus_id, &pios_usart_exbus_flexi_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_exbus_id;
if (PIOS_EXBUS_Init(&pios_exbus_id, &pios_usart_com_driver, pios_usart_exbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_exbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_exbus_rcvr_id, &pios_exbus_rcvr_driver, pios_exbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_JETIEXBUSFLEXIPORT] = pios_exbus_rcvr_id;
}
#endif /* PIOS_INCLUDE_EXBUS */
break;
} /* hwsettings_rm_flexiport */
#if defined(PIOS_INCLUDE_PWM) || defined(PIOS_INCLUDE_PWM)
const struct pios_servo_cfg *pios_servo_cfg;
// default to servo outputs only
pios_servo_cfg = &pios_servo_cfg_out;
#endif
/* Configure the receiver port*/
uint8_t hwsettings_rcvrport;
HwSettingsRM_RcvrPortGet(&hwsettings_rcvrport);
//
switch (hwsettings_rcvrport) {
case HWSETTINGS_RM_RCVRPORT_DISABLED:
break;
case HWSETTINGS_RM_RCVRPORT_PWM:
#if defined(PIOS_INCLUDE_PWM)
/* Set up the receiver port. Later this should be optional */
PIOS_Board_configure_pwm(&pios_pwm_cfg);
#endif /* PIOS_INCLUDE_PWM */
break;
case HWSETTINGS_RM_RCVRPORT_PPM:
case HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS:
case HWSETTINGS_RM_RCVRPORT_PPMPWM:
#if defined(PIOS_INCLUDE_PPM)
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS) {
// configure servo outputs and the remaining 5 inputs as outputs
pios_servo_cfg = &pios_servo_cfg_out_in_ppm;
}
PIOS_Board_configure_ppm(&pios_ppm_cfg);
break;
#endif /* PIOS_INCLUDE_PPM */
case HWSETTINGS_RM_RCVRPORT_OUTPUTS:
// configure only the servo outputs
pios_servo_cfg = &pios_servo_cfg_out_in;
break;
}
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uint32_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uint32_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#ifdef PIOS_INCLUDE_WS2811
#include <pios_ws2811.h>
HwSettingsWS2811LED_OutOptions ws2811_pin_settings;
HwSettingsWS2811LED_OutGet(&ws2811_pin_settings);
// No other choices but servo pin 1 on nano
if (ws2811_pin_settings != HWSETTINGS_WS2811LED_OUT_DISABLED) {
pios_tim_servoport_all_pins[0] = dummmy_timer; // free timer 1
PIOS_WS2811_Init(&pios_ws2811_cfg, &pios_ws2811_pin_cfg[0]);
}
#endif // PIOS_INCLUDE_WS2811
#ifndef PIOS_ENABLE_DEBUG_PINS
// pios_servo_cfg points to the correct configuration based on input port settings
PIOS_Servo_Init(pios_servo_cfg);
#else
PIOS_DEBUG_Init(pios_tim_servoport_all_pins, NELEMENTS(pios_tim_servoport_all_pins));
#endif
PIOS_DELAY_WaitmS(50);
#if defined(PIOS_INCLUDE_ADC)
PIOS_ADC_Init(&pios_adc_cfg);
#endif
#if defined(PIOS_INCLUDE_MPU9250)
PIOS_MPU9250_Init(pios_spi_gyro_id, 0, &pios_mpu9250_cfg);
PIOS_MPU9250_CONFIG_Configure();
PIOS_MPU9250_MainRegister();
PIOS_MPU9250_MagRegister();
#endif
#if defined(PIOS_INCLUDE_MS5611)
PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_pressure_adapter_id);
PIOS_MS5611_Register();
#endif
#ifdef PIOS_INCLUDE_ADC
uint8_t adc_config[HWSETTINGS_ADCROUTING_NUMELEM];
HwSettingsADCRoutingArrayGet(adc_config);
for (uint32_t i = 0; i < HWSETTINGS_ADCROUTING_NUMELEM; i++) {
if (adc_config[i] != HWSETTINGS_ADCROUTING_DISABLED) {
PIOS_ADC_PinSetup(i);
}
}
#endif
// Attach the board config check hook
SANITYCHECK_AttachHook(&RevoNanoConfigHook);
// trigger a config check if actuatorsettings are updated
ActuatorSettingsInitialize();
ActuatorSettingsConnectCallback(ActuatorSettingsUpdatedCb);
}
SystemAlarmsExtendedAlarmStatusOptions RevoNanoConfigHook()
{
// inhibit usage of oneshot for non supported RECEIVER port modes
uint8_t recmode;
HwSettingsRM_RcvrPortGet(&recmode);
uint8_t modes[ACTUATORSETTINGS_BANKMODE_NUMELEM];
ActuatorSettingsBankModeGet(modes);
switch ((HwSettingsRM_RcvrPortOptions)recmode) {
// Those modes allows oneshot usage
case HWSETTINGS_RM_RCVRPORT_DISABLED:
case HWSETTINGS_RM_RCVRPORT_PPM:
case HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS:
case HWSETTINGS_RM_RCVRPORT_OUTPUTS:
return SYSTEMALARMS_EXTENDEDALARMSTATUS_NONE;
// inhibit oneshot for the following modes
case HWSETTINGS_RM_RCVRPORT_PWM:
for (uint8_t i = 0; i < ACTUATORSETTINGS_BANKMODE_NUMELEM; i++) {
if (modes[i] == ACTUATORSETTINGS_BANKMODE_PWMSYNC ||
modes[i] == ACTUATORSETTINGS_BANKMODE_ONESHOT125) {
return SYSTEMALARMS_EXTENDEDALARMSTATUS_UNSUPPORTEDCONFIG_ONESHOT;;
}
}
return SYSTEMALARMS_EXTENDEDALARMSTATUS_NONE;
default:
break;
}
return SYSTEMALARMS_EXTENDEDALARMSTATUS_UNSUPPORTEDCONFIG_ONESHOT;;
}
// trigger a configuration check if ActuatorSettings are changed.
void ActuatorSettingsUpdatedCb(__attribute__((unused)) UAVObjEvent *ev)
{
configuration_check();
}
/**
* @}
* @}
*/