1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
LibrePilot/flight/targets/boards/coptercontrol/board-info.mk
Brian Webb bc4f615c25 Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz).
Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets.  This allows for custom SystemInit functions where necessary.
2013-05-17 22:01:48 -07:00

24 lines
745 B
Makefile

BOARD_TYPE := 0x04
BOARD_REVISION := 0x02
BOOTLOADER_VERSION := 0x04
HW_TYPE := 0x01
MCU := cortex-m3
CHIP := STM32F103CBT
BOARD := STM32103CB_CC_Rev1
MODEL := MD
MODEL_SUFFIX := _CC
OPENOCD_JTAG_CONFIG := foss-jtag.revb.cfg
OPENOCD_CONFIG := stm32f1x.cfg
# Note: These must match the values in link_$(BOARD)_memory.ld
BL_BANK_BASE := 0x08000000 # Start of bootloader flash
BL_BANK_SIZE := 0x00003000 # Should include BD_INFO region
FW_BANK_BASE := 0x08003000 # Start of firmware flash
FW_BANK_SIZE := 0x0001D000 # Should include FW_DESC_SIZE
FW_DESC_SIZE := 0x00000064
OSCILLATOR_FREQ := 8000000