1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
LibrePilot/flight/targets/boards/oplinkmini/board-info.mk
2013-05-18 15:53:25 +02:00

41 lines
1.2 KiB
Makefile

BOARD_TYPE := 0x03
BOARD_REVISION := 0x01
BOOTLOADER_VERSION := 0x04
HW_TYPE := 0x01
MCU := cortex-m3
CHIP := STM32F103CBT
BOARD := STM32103CB_OPLINKMINI
MODEL := MD
MODEL_SUFFIX := _PX
OPENOCD_JTAG_CONFIG := stlink-v2.cfg
OPENOCD_CONFIG := stm32f1x.stlink.cfg
# Flash memory map for OPLM:
# Sector start size use
# 0 0x0800 0000 1k BL
# 1 0x0800 0400 1k BL
# .. ..
# 10 0x0800 2C00 1k BL
# 11 0x0800 3000 1k FW
# 12 0x0800 1000 1k FW
# .. ..
# 125 0x0801 F400 1k FW
# 126 0x0801 F800 1k EE
# 127 0x0801 FC00 1k EE
# Note: These must match the values in link_$(BOARD)_memory.ld
BL_BANK_BASE := 0x08000000 # Start of bootloader flash
BL_BANK_SIZE := 0x00003000 # Should include BD_INFO region
FW_BANK_BASE := 0x08003000 # Start of firmware flash
FW_BANK_SIZE := 0x0001CC00 # Should include FW_DESC_SIZE
FW_BANK_SIZE := 0x00019000 # Should include FW_DESC_SIZE
EE_BANK_BASE := 0x0801C000 # EEPROM storage area
EE_BANK_SIZE := 0x00004000 # Size of EEPROM storage area
FW_DESC_SIZE := 0x00000064
OSCILLATOR_FREQ := 8000000