mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-10 18:24:11 +01:00
4e6b539086
Not yet used anywhere but will eventually allow debug pins to be assigned during runtime init based on configuration found in a new uavobject. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2741 ebee16cc-31ac-478f-84a7-5cbb03baadba
416 lines
10 KiB
C
416 lines
10 KiB
C
/**
|
|
******************************************************************************
|
|
*
|
|
* @file pios_board.c
|
|
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
|
* @brief Defines board specific static initializers for hardware for the AHRS board.
|
|
* @see The GNU Public License (GPL) Version 3
|
|
*
|
|
*****************************************************************************/
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <pios.h>
|
|
|
|
#if defined(PIOS_INCLUDE_SPI)
|
|
|
|
#include <pios_spi_priv.h>
|
|
|
|
/* OP Interface
|
|
*
|
|
* NOTE: Leave this declared as const data so that it ends up in the
|
|
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
|
|
*/
|
|
void PIOS_SPI_op_irq_handler(void);
|
|
void DMA1_Channel5_IRQHandler() __attribute__ ((alias("PIOS_SPI_op_irq_handler")));
|
|
void DMA1_Channel4_IRQHandler() __attribute__ ((alias("PIOS_SPI_op_irq_handler")));
|
|
static const struct pios_spi_cfg pios_spi_op_cfg = {
|
|
.regs = SPI2,
|
|
.init = {
|
|
.SPI_Mode = SPI_Mode_Slave,
|
|
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
|
|
.SPI_DataSize = SPI_DataSize_8b,
|
|
.SPI_NSS = SPI_NSS_Hard,
|
|
.SPI_FirstBit = SPI_FirstBit_MSB,
|
|
.SPI_CRCPolynomial = 7,
|
|
.SPI_CPOL = SPI_CPOL_High,
|
|
.SPI_CPHA = SPI_CPHA_2Edge,
|
|
},
|
|
.use_crc = TRUE,
|
|
.dma = {
|
|
.ahb_clk = RCC_AHBPeriph_DMA1,
|
|
|
|
.irq = {
|
|
.handler = PIOS_SPI_op_irq_handler,
|
|
.flags =
|
|
(DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 |
|
|
DMA1_FLAG_GL4),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
|
|
.rx = {
|
|
.channel = DMA1_Channel4,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr =
|
|
(uint32_t) & (SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
|
.DMA_PeripheralInc =
|
|
DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize =
|
|
DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize =
|
|
DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_Medium,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
.tx = {
|
|
.channel = DMA1_Channel5,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr =
|
|
(uint32_t) & (SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralDST,
|
|
.DMA_PeripheralInc =
|
|
DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize =
|
|
DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize =
|
|
DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_Medium,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
},
|
|
.ssel = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_12,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
.sclk = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_13,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
.miso = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_14,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
.mosi = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_15,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Board specific number of devices.
|
|
*/
|
|
struct pios_spi_dev pios_spi_devs[] = {
|
|
{
|
|
.cfg = &pios_spi_op_cfg,
|
|
},
|
|
};
|
|
|
|
uint8_t pios_spi_num_devices = NELEMENTS(pios_spi_devs);
|
|
|
|
void PIOS_SPI_op_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_SPI_IRQ_Handler(PIOS_SPI_OP);
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_SPI */
|
|
|
|
/*
|
|
* ADC system
|
|
*/
|
|
#include "pios_adc_priv.h"
|
|
extern void PIOS_ADC_handler(void);
|
|
void DMA1_Channel1_IRQHandler() __attribute__ ((alias("PIOS_ADC_handler")));
|
|
// Remap the ADC DMA handler to this one
|
|
const struct pios_adc_cfg pios_adc_cfg = {
|
|
.dma = {
|
|
.ahb_clk = RCC_AHBPeriph_DMA1,
|
|
.irq = {
|
|
.handler = PIOS_ADC_DMA_Handler,
|
|
.flags = (DMA1_FLAG_TC1 | DMA1_FLAG_TE1 | DMA1_FLAG_HT1 | DMA1_FLAG_GL1),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA1_Channel1_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.channel = DMA1_Channel1,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t) & ADC1->DR,
|
|
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
|
|
.DMA_Mode = DMA_Mode_Circular,
|
|
.DMA_Priority = DMA_Priority_High,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
}
|
|
},
|
|
.half_flag = DMA1_IT_HT1,
|
|
.full_flag = DMA1_IT_TC1,
|
|
};
|
|
|
|
struct pios_adc_dev pios_adc_devs[] = {
|
|
{
|
|
.cfg = &pios_adc_cfg,
|
|
.callback_function = NULL,
|
|
},
|
|
};
|
|
|
|
uint8_t pios_adc_num_devices = NELEMENTS(pios_adc_devs);
|
|
|
|
void PIOS_ADC_handler() {
|
|
PIOS_ADC_DMA_Handler();
|
|
}
|
|
|
|
|
|
#if defined(PIOS_INCLUDE_USART)
|
|
#include <pios_usart_priv.h>
|
|
|
|
/*
|
|
* AUX USART
|
|
*/
|
|
void PIOS_USART_aux_irq_handler(void);
|
|
void USART3_IRQHandler()
|
|
__attribute__ ((alias("PIOS_USART_aux_irq_handler")));
|
|
const struct pios_usart_cfg pios_usart_aux_cfg = {
|
|
.regs = USART3,
|
|
.init = {
|
|
#if defined (PIOS_USART_BAUDRATE)
|
|
.USART_BaudRate = PIOS_USART_BAUDRATE,
|
|
#else
|
|
.USART_BaudRate = 57600,
|
|
#endif
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl =
|
|
USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
|
|
},
|
|
.irq = {
|
|
.handler = PIOS_USART_aux_irq_handler,
|
|
.init = {
|
|
.NVIC_IRQChannel = USART3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Board specific number of devices.
|
|
*/
|
|
struct pios_usart_dev pios_usart_devs[] = {
|
|
#define PIOS_USART_AUX 0
|
|
{
|
|
.cfg = &pios_usart_aux_cfg,
|
|
},
|
|
};
|
|
|
|
uint8_t pios_usart_num_devices = NELEMENTS(pios_usart_devs);
|
|
|
|
void PIOS_USART_aux_irq_handler(void)
|
|
{
|
|
PIOS_USART_IRQ_Handler(PIOS_USART_AUX);
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_USART */
|
|
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
#include <pios_com_priv.h>
|
|
|
|
/*
|
|
* COM devices
|
|
*/
|
|
|
|
/*
|
|
* Board specific number of devices.
|
|
*/
|
|
extern const struct pios_com_driver pios_usart_com_driver;
|
|
|
|
struct pios_com_dev pios_com_devs[] = {
|
|
#if defined(PIOS_INCLUDE_USART)
|
|
{
|
|
.id = PIOS_USART_AUX,
|
|
.driver = &pios_usart_com_driver,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
const uint8_t pios_com_num_devices = NELEMENTS(pios_com_devs);
|
|
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
|
|
#if defined(PIOS_INCLUDE_I2C)
|
|
#include <pios_i2c_priv.h>
|
|
|
|
/*
|
|
* I2C Adapters
|
|
*/
|
|
|
|
void PIOS_I2C_main_adapter_ev_irq_handler(void);
|
|
void PIOS_I2C_main_adapter_er_irq_handler(void);
|
|
void I2C1_EV_IRQHandler()
|
|
__attribute__ ((alias("PIOS_I2C_main_adapter_ev_irq_handler")));
|
|
void I2C1_ER_IRQHandler()
|
|
__attribute__ ((alias("PIOS_I2C_main_adapter_er_irq_handler")));
|
|
|
|
const struct pios_i2c_adapter_cfg pios_i2c_main_adapter_cfg = {
|
|
.regs = I2C1,
|
|
.init = {
|
|
.I2C_Mode = I2C_Mode_I2C,
|
|
.I2C_OwnAddress1 = 0,
|
|
.I2C_Ack = I2C_Ack_Enable,
|
|
.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit,
|
|
.I2C_DutyCycle = I2C_DutyCycle_2,
|
|
.I2C_ClockSpeed = 200000, /* bits/s */
|
|
},
|
|
.transfer_timeout_ms = 50,
|
|
.scl = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_6,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_OD,
|
|
},
|
|
},
|
|
.sda = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_7,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_OD,
|
|
},
|
|
},
|
|
.event = {
|
|
.handler = PIOS_I2C_main_adapter_ev_irq_handler,
|
|
.flags = 0, /* FIXME: check this */
|
|
.init = {
|
|
.NVIC_IRQChannel = I2C1_EV_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.error = {
|
|
.handler = PIOS_I2C_main_adapter_er_irq_handler,
|
|
.flags = 0, /* FIXME: check this */
|
|
.init = {
|
|
.NVIC_IRQChannel = I2C1_ER_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Board specific number of devices.
|
|
*/
|
|
struct pios_i2c_adapter pios_i2c_adapters[] = {
|
|
{
|
|
.cfg = &pios_i2c_main_adapter_cfg,
|
|
},
|
|
};
|
|
|
|
uint8_t pios_i2c_num_adapters = NELEMENTS(pios_i2c_adapters);
|
|
|
|
void PIOS_I2C_main_adapter_ev_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_I2C_EV_IRQ_Handler(PIOS_I2C_MAIN_ADAPTER);
|
|
}
|
|
|
|
void PIOS_I2C_main_adapter_er_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_I2C_ER_IRQ_Handler(PIOS_I2C_MAIN_ADAPTER);
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_I2C */
|
|
|
|
#if defined(PIOS_ENABLE_DEBUG_PINS)
|
|
|
|
static const struct stm32_gpio pios_debug_pins[] = {
|
|
{
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
{
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
#endif /* PIOS_ENABLE_DEBUG_PINS */ |