rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-10 18:24:11 +01:00
Code Issues Releases Activity
d372c615ed
LibrePilot/flight/CopterControl/System/pios_board.c
Oleg Semyonov 6272210df7 sbus: some code cleanup (no functional changes)
2011-06-19 14:30:13 +03:00

955 lines
26 KiB
C
Raw Blame History

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file pios_board.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board specific static initializers for hardware for the OpenPilot board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <pios.h>
#include <openpilot.h>
#include <uavobjectsinit.h>
#if defined(PIOS_INCLUDE_SPI)
#include <pios_spi_priv.h>
/* Flash/Accel Interface
*
* NOTE: Leave this declared as const data so that it ends up in the
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
*/
void PIOS_SPI_flash_accel_irq_handler(void);
void DMA1_Channel4_IRQHandler() __attribute__ ((alias ("PIOS_SPI_flash_accel_irq_handler")));
void DMA1_Channel5_IRQHandler() __attribute__ ((alias ("PIOS_SPI_flash_accel_irq_handler")));
const struct pios_spi_cfg pios_spi_flash_accel_cfg = {
.regs = SPI2,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2,
},
.use_crc = FALSE,
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.handler = PIOS_SPI_flash_accel_irq_handler,
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
.init = {
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel4,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
.tx = {
.channel = DMA1_Channel5,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralDST,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
},
.ssel = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_13,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
static uint32_t pios_spi_flash_accel_id;
void PIOS_SPI_flash_accel_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_flash_accel_id);
}
#endif /* PIOS_INCLUDE_SPI */
/*
* ADC system
*/
#include "pios_adc_priv.h"
extern void PIOS_ADC_handler(void);
void DMA1_Channel1_IRQHandler() __attribute__ ((alias("PIOS_ADC_handler")));
// Remap the ADC DMA handler to this one
const struct pios_adc_cfg pios_adc_cfg = {
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.handler = PIOS_ADC_DMA_Handler,
.flags = (DMA1_FLAG_TC1 | DMA1_FLAG_TE1 | DMA1_FLAG_HT1 | DMA1_FLAG_GL1),
.init = {
.NVIC_IRQChannel = DMA1_Channel1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel1,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t) & ADC1->DR,
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Circular,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
}
},
.half_flag = DMA1_IT_HT1,
.full_flag = DMA1_IT_TC1,
};
struct pios_adc_dev pios_adc_devs[] = {
{
.cfg = &pios_adc_cfg,
.callback_function = NULL,
},
};
uint8_t pios_adc_num_devices = NELEMENTS(pios_adc_devs);
void PIOS_ADC_handler() {
PIOS_ADC_DMA_Handler();
}
#if defined(PIOS_INCLUDE_USART)
#include "pios_usart_priv.h"
/*
* Define USART port configurations and check for conflicts
* making sure they do not conflict with each other and with I2C.
*/
#define USART_GPIO(port) (((port) == 1) ? GPIOA : GPIOB)
#define USART_RXIO(port) (((port) == 1) ? GPIO_Pin_10 : GPIO_Pin_11)
#define USART_TXIO(port) (((port) == 1) ? GPIO_Pin_9 : GPIO_Pin_10)
#if defined(USE_TELEMETRY)
#if defined(USE_I2C) && (PIOS_PORT_TELEMETRY == 3)
#error defined(USE_I2C) && (PIOS_PORT_TELEMETRY == 3)
#endif
#if (PIOS_PORT_TELEMETRY == 1)
#define PIOS_USART_TELEMETRY USART1
#define PIOS_IRQH_TELEMETRY USART1_IRQHandler
#define PIOS_IRQC_TELEMETRY USART1_IRQn
#else
#define PIOS_USART_TELEMETRY USART3
#define PIOS_IRQH_TELEMETRY USART3_IRQHandler
#define PIOS_IRQC_TELEMETRY USART3_IRQn
#endif
#define PIOS_GPIO_TELEMETRY USART_GPIO(PIOS_PORT_TELEMETRY)
#define PIOS_RXIO_TELEMETRY USART_RXIO(PIOS_PORT_TELEMETRY)
#define PIOS_TXIO_TELEMETRY USART_TXIO(PIOS_PORT_TELEMETRY)
#endif
#if defined(USE_GPS)
#if defined(USE_I2C) && (PIOS_PORT_GPS == 3)
#error defined(USE_I2C) && (PIOS_PORT_GPS == 3)
#endif
#if defined(USE_TELEMETRY) && (PIOS_PORT_TELEMETRY == PIOS_PORT_GPS)
#error defined(USE_TELEMETRY) && (PIOS_PORT_TELEMETRY == PIOS_PORT_GPS)
#endif
#if (PIOS_PORT_GPS == 1)
#define PIOS_USART_GPS USART1
#define PIOS_IRQH_GPS USART1_IRQHandler
#define PIOS_IRQC_GPS USART1_IRQn
#else
#define PIOS_USART_GPS USART3
#define PIOS_IRQH_GPS USART3_IRQHandler
#define PIOS_IRQC_GPS USART3_IRQn
#endif
#define PIOS_GPIO_GPS USART_GPIO(PIOS_PORT_GPS)
#define PIOS_RXIO_GPS USART_RXIO(PIOS_PORT_GPS)
#define PIOS_TXIO_GPS USART_TXIO(PIOS_PORT_GPS)
#endif
#if defined(USE_SPEKTRUM)
#if defined(USE_I2C) && (PIOS_PORT_SPEKTRUM == 3)
#error defined(USE_I2C) && (PIOS_PORT_SPEKTRUM == 3)
#endif
#if defined(USE_TELEMETRY) && (PIOS_PORT_SPEKTRUM == PIOS_PORT_TELEMETRY)
#error defined(USE_TELEMETRY) && (PIOS_PORT_SPEKTRUM == PIOS_PORT_TELEMETRY)
#endif
#if defined(USE_GPS) && (PIOS_PORT_SPEKTRUM == PIOS_PORT_GPS)
#error defined(USE_GPS) && (PIOS_PORT_SPEKTRUM == PIOS_PORT_GPS)
#endif
#if defined(USE_SBUS)
#error defined(USE_SPEKTRUM) && defined(USE_SBUS)
#endif
#if (PIOS_PORT_SPEKTRUM == 1)
#define PIOS_USART_SPEKTRUM USART1
#define PIOS_IRQH_SPEKTRUM USART1_IRQHandler
#define PIOS_IRQC_SPEKTRUM USART1_IRQn
#else
#define PIOS_USART_SPEKTRUM USART3
#define PIOS_IRQH_SPEKTRUM USART3_IRQHandler
#define PIOS_IRQC_SPEKTRUM USART3_IRQn
#endif
#define PIOS_GPIO_SPEKTRUM USART_GPIO(PIOS_PORT_SPEKTRUM)
#define PIOS_RXIO_SPEKTRUM USART_RXIO(PIOS_PORT_SPEKTRUM)
#define PIOS_TXIO_SPEKTRUM USART_TXIO(PIOS_PORT_SPEKTRUM)
#endif
#if defined(USE_SBUS)
#if (PIOS_PORT_SBUS != 1)
#error (PIOS_PORT_SBUS != 1)
#endif
#if defined(USE_TELEMETRY) && (PIOS_PORT_SBUS == PIOS_PORT_TELEMETRY)
#error defined(USE_TELEMETRY) && (PIOS_PORT_SBUS == PIOS_PORT_TELEMETRY)
#endif
#if defined(USE_GPS) && (PIOS_PORT_SBUS == PIOS_PORT_GPS)
#error defined(USE_GPS) && (PIOS_PORT_SBUS == PIOS_PORT_GPS)
#endif
#if defined(USE_SPEKTRUM)
#error defined(USE_SPEKTRUM) && defined(USE_SBUS)
#endif
#define PIOS_USART_SBUS USART1
#define PIOS_IRQH_SBUS USART1_IRQHandler
#define PIOS_IRQC_SBUS USART1_IRQn
#define PIOS_GPIO_SBUS USART_GPIO(PIOS_PORT_SBUS)
#define PIOS_RXIO_SBUS USART_RXIO(PIOS_PORT_SBUS)
#define PIOS_TXIO_SBUS USART_TXIO(PIOS_PORT_SBUS)
#endif
#if defined(PIOS_INCLUDE_TELEMETRY_RF)
/*
* Telemetry USART
*/
void PIOS_USART_telem_irq_handler(void);
void PIOS_IRQH_TELEMETRY() __attribute__ ((alias ("PIOS_USART_telem_irq_handler")));
const struct pios_usart_cfg pios_usart_telem_cfg = {
.regs = PIOS_USART_TELEMETRY,
.init = {
#if defined (PIOS_COM_TELEM_BAUDRATE)
.USART_BaudRate = PIOS_COM_TELEM_BAUDRATE,
#else
.USART_BaudRate = 57600,
#endif
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.handler = PIOS_USART_telem_irq_handler,
.init = {
.NVIC_IRQChannel = PIOS_IRQC_TELEMETRY,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = PIOS_GPIO_TELEMETRY,
.init = {
.GPIO_Pin = PIOS_RXIO_TELEMETRY,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = PIOS_GPIO_TELEMETRY,
.init = {
.GPIO_Pin = PIOS_TXIO_TELEMETRY,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
#endif /* PIOS_INCLUDE_TELEMETRY_RF */
#if defined(PIOS_INCLUDE_GPS)
/*
* GPS USART
*/
void PIOS_USART_gps_irq_handler(void);
void PIOS_IRQH_GPS() __attribute__ ((alias ("PIOS_USART_gps_irq_handler")));
const struct pios_usart_cfg pios_usart_gps_cfg = {
.regs = PIOS_USART_GPS,
.init = {
#if defined (PIOS_COM_GPS_BAUDRATE)
.USART_BaudRate = PIOS_COM_GPS_BAUDRATE,
#else
.USART_BaudRate = 57600,
#endif
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.handler = PIOS_USART_gps_irq_handler,
.init = {
.NVIC_IRQChannel = PIOS_IRQC_GPS,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = PIOS_GPIO_GPS,
.init = {
.GPIO_Pin = PIOS_RXIO_GPS,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = PIOS_GPIO_GPS,
.init = {
.GPIO_Pin = PIOS_TXIO_GPS,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
#endif
#if defined(PIOS_INCLUDE_SPEKTRUM)
/*
* SPEKTRUM USART
*/
void PIOS_USART_spektrum_irq_handler(void);
void PIOS_IRQH_SPEKTRUM() __attribute__ ((alias ("PIOS_USART_spektrum_irq_handler")));
const struct pios_usart_cfg pios_usart_spektrum_cfg = {
.regs = PIOS_USART_SPEKTRUM,
.init = {
#if defined (PIOS_COM_SPEKTRUM_BAUDRATE)
.USART_BaudRate = PIOS_COM_SPEKTRUM_BAUDRATE,
#else
.USART_BaudRate = 115200,
#endif
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx,
},
.irq = {
.handler = PIOS_USART_spektrum_irq_handler,
.init = {
.NVIC_IRQChannel = PIOS_IRQC_SPEKTRUM,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = PIOS_GPIO_SPEKTRUM,
.init = {
.GPIO_Pin = PIOS_RXIO_SPEKTRUM,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = PIOS_GPIO_SPEKTRUM,
.init = {
.GPIO_Pin = PIOS_TXIO_SPEKTRUM,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
};
static uint32_t pios_usart_spektrum_id;
void PIOS_USART_spektrum_irq_handler(void)
{
SPEKTRUM_IRQHandler(pios_usart_spektrum_id);
}
#include <pios_spektrum_priv.h>
void RTC_IRQHandler();
void RTC_IRQHandler() __attribute__ ((alias ("PIOS_SUPV_irq_handler")));
const struct pios_spektrum_cfg pios_spektrum_cfg = {
.pios_usart_spektrum_cfg = &pios_usart_spektrum_cfg,
.gpio_init = { //used for bind feature
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
.remap = 0,
.irq = {
.handler = RTC_IRQHandler,
.init = {
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.port = PIOS_GPIO_SPEKTRUM,
.pin = PIOS_RXIO_SPEKTRUM,
};
void PIOS_SUPV_irq_handler() {
if (RTC_GetITStatus(RTC_IT_SEC))
{
/* Call the right handler */
PIOS_SPEKTRUM_irq_handler(pios_usart_spektrum_id);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Clear the RTC Second interrupt */
RTC_ClearITPendingBit(RTC_IT_SEC);
}
}
#endif /* PIOS_INCLUDE_SPEKTRUM */
#if defined(PIOS_INCLUDE_SBUS)
/*
* SBUS USART
*/
void PIOS_USART_sbus_irq_handler(void);
void PIOS_IRQH_SBUS() __attribute__ ((alias ("PIOS_USART_sbus_irq_handler")));
const struct pios_usart_cfg pios_usart_sbus_cfg = {
.regs = PIOS_USART_SBUS,
.init = {
#if defined (PIOS_COM_SBUS_BAUDRATE)
.USART_BaudRate = PIOS_COM_SBUS_BAUDRATE,
#else
.USART_BaudRate = 100000,
#endif
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_Even,
.USART_StopBits = USART_StopBits_2,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx,
},
.irq = {
.handler = PIOS_USART_sbus_irq_handler,
.init = {
.NVIC_IRQChannel = PIOS_IRQC_SBUS,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = PIOS_GPIO_SBUS,
.init = {
.GPIO_Pin = PIOS_RXIO_SBUS,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = PIOS_GPIO_SBUS,
.init = {
.GPIO_Pin = PIOS_TXIO_SBUS,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
};
static uint32_t pios_usart_sbus_id;
void PIOS_USART_sbus_irq_handler(void)
{
SBUS_IRQHandler(pios_usart_sbus_id);
}
#include <pios_sbus_priv.h>
void RTC_IRQHandler();
void RTC_IRQHandler() __attribute__ ((alias ("PIOS_SUPV_irq_handler")));
const struct pios_sbus_cfg pios_sbus_cfg = {
/* USART configuration structure */
.pios_usart_sbus_cfg = &pios_usart_sbus_cfg,
/* Invertor configuration */
.gpio_clk_func = RCC_APB2PeriphClockCmd,
.gpio_clk_periph = RCC_APB2Periph_GPIOB,
.gpio_inv_port = GPIOB,
.gpio_inv_init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
.gpio_inv_enable = Bit_SET,
};
void PIOS_SUPV_irq_handler() {
if (RTC_GetITStatus(RTC_IT_SEC))
{
/* Call the right handler */
PIOS_SBUS_irq_handler(pios_usart_sbus_id);
/* Wait until last write operation on RTC registers has finished */
RTC_WaitForLastTask();
/* Clear the RTC Second interrupt */
RTC_ClearITPendingBit(RTC_IT_SEC);
}
}
#endif /* PIOS_INCLUDE_SBUS */
#if defined(PIOS_INCLUDE_TELEMETRY_RF)
static uint32_t pios_usart_telem_rf_id;
void PIOS_USART_telem_irq_handler(void)
{
PIOS_USART_IRQ_Handler(pios_usart_telem_rf_id);
}
#endif /* PIOS_INCLUDE_TELEMETRY_RF */
#if defined(PIOS_INCLUDE_GPS)
static uint32_t pios_usart_gps_id;
void PIOS_USART_gps_irq_handler(void)
{
PIOS_USART_IRQ_Handler(pios_usart_gps_id);
}
#endif /* PIOS_INCLUDE_GPS */
#endif /* PIOS_INCLUDE_USART */
#if defined(PIOS_INCLUDE_COM)
#include "pios_com_priv.h"
#endif /* PIOS_INCLUDE_COM */
/*
* Servo outputs
*/
#include <pios_servo_priv.h>
const struct pios_servo_channel pios_servo_channels[] = {
{
.timer = TIM4,
.port = GPIOB,
.channel = TIM_Channel_4,
.pin = GPIO_Pin_9,
},
{
.timer = TIM4,
.port = GPIOB,
.channel = TIM_Channel_3,
.pin = GPIO_Pin_8,
},
{
.timer = TIM4,
.port = GPIOB,
.channel = TIM_Channel_2,
.pin = GPIO_Pin_7,
},
{
.timer = TIM1,
.port = GPIOA,
.channel = TIM_Channel_1,
.pin = GPIO_Pin_8,
},
{ /* needs to remap to alternative function */
.timer = TIM3,
.port = GPIOB,
.channel = TIM_Channel_1,
.pin = GPIO_Pin_4,
},
{
.timer = TIM2,
.port = GPIOA,
.channel = TIM_Channel_3,
.pin = GPIO_Pin_2,
},
};
const struct pios_servo_cfg pios_servo_cfg = {
.tim_base_init = {
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = ((1000000 / PIOS_SERVO_UPDATE_HZ) - 1),
.TIM_RepetitionCounter = 0x0000,
},
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.gpio_init = {
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
.remap = GPIO_PartialRemap_TIM3,
.channels = pios_servo_channels,
.num_channels = NELEMENTS(pios_servo_channels),
};
/*
* PWM Inputs
*/
#if defined(PIOS_INCLUDE_PWM)
#include <pios_pwm_priv.h>
const struct pios_pwm_channel pios_pwm_channels[] = {
{
.timer = TIM4,
.port = GPIOB,
.ccr = TIM_IT_CC1,
.channel = TIM_Channel_1,
.pin = GPIO_Pin_6,
},
{
.timer = TIM3,
.port = GPIOB,
.ccr = TIM_IT_CC2,
.channel = TIM_Channel_2,
.pin = GPIO_Pin_5,
},
{
.timer = TIM3,
.port = GPIOB,
.ccr = TIM_IT_CC3,
.channel = TIM_Channel_3,
.pin = GPIO_Pin_0
},
{
.timer = TIM3,
.port = GPIOB,
.ccr = TIM_IT_CC4,
.channel = TIM_Channel_4,
.pin = GPIO_Pin_1,
},
{
.timer = TIM2,
.port = GPIOA,
.ccr = TIM_IT_CC1,
.channel = TIM_Channel_1,
.pin = GPIO_Pin_0,
},
{
.timer = TIM2,
.port = GPIOA,
.ccr = TIM_IT_CC2,
.channel = TIM_Channel_2,
.pin = GPIO_Pin_1,
},
};
void TIM2_IRQHandler();
void TIM3_IRQHandler();
void TIM4_IRQHandler();
void TIM2_IRQHandler() __attribute__ ((alias ("PIOS_TIM2_irq_handler")));
void TIM3_IRQHandler() __attribute__ ((alias ("PIOS_TIM3_irq_handler")));
void TIM4_IRQHandler() __attribute__ ((alias ("PIOS_TIM4_irq_handler")));
const struct pios_pwm_cfg pios_pwm_cfg = {
.tim_base_init = {
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = 0xFFFF,
.TIM_RepetitionCounter = 0x0000,
},
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
},
.gpio_init = {
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
.remap = 0,
.irq = {
.handler = TIM2_IRQHandler,
.init = {
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.channels = pios_pwm_channels,
.num_channels = NELEMENTS(pios_pwm_channels),
};
void PIOS_TIM2_irq_handler()
{
PIOS_PWM_irq_handler(TIM2);
}
void PIOS_TIM3_irq_handler()
{
PIOS_PWM_irq_handler(TIM3);
}
void PIOS_TIM4_irq_handler()
{
PIOS_PWM_irq_handler(TIM4);
}
#endif
#if defined(PIOS_INCLUDE_I2C)
#include <pios_i2c_priv.h>
/*
* I2C Adapters
*/
void PIOS_I2C_main_adapter_ev_irq_handler(void);
void PIOS_I2C_main_adapter_er_irq_handler(void);
void I2C2_EV_IRQHandler() __attribute__ ((alias ("PIOS_I2C_main_adapter_ev_irq_handler")));
void I2C2_ER_IRQHandler() __attribute__ ((alias ("PIOS_I2C_main_adapter_er_irq_handler")));
const struct pios_i2c_adapter_cfg pios_i2c_main_adapter_cfg = {
.regs = I2C2,
.init = {
.I2C_Mode = I2C_Mode_I2C,
.I2C_OwnAddress1 = 0,
.I2C_Ack = I2C_Ack_Enable,
.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit,
.I2C_DutyCycle = I2C_DutyCycle_2,
.I2C_ClockSpeed = 400000, /* bits/s */
},
.transfer_timeout_ms = 50,
.scl = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
},
.sda = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
},
.event = {
.handler = PIOS_I2C_main_adapter_ev_irq_handler,
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_EV_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.error = {
.handler = PIOS_I2C_main_adapter_er_irq_handler,
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_ER_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
uint32_t pios_i2c_main_adapter_id;
void PIOS_I2C_main_adapter_ev_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_EV_IRQ_Handler(pios_i2c_main_adapter_id);
}
void PIOS_I2C_main_adapter_er_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_ER_IRQ_Handler(pios_i2c_main_adapter_id);
}
#endif /* PIOS_INCLUDE_I2C */
extern const struct pios_com_driver pios_usb_com_driver;
uint32_t pios_com_telem_rf_id;
uint32_t pios_com_telem_usb_id;
uint32_t pios_com_gps_id;
uint32_t pios_com_spektrum_id;
uint32_t pios_com_sbus_id;
/**
* PIOS_Board_Init()
* initializes all the core subsystems on this specific hardware
* called from System/openpilot.c
*/
void PIOS_Board_Init(void) {
/* Delay system */
PIOS_DELAY_Init();
/* Set up the SPI interface to the serial flash */
if (PIOS_SPI_Init(&pios_spi_flash_accel_id, &pios_spi_flash_accel_cfg)) {
PIOS_DEBUG_Assert(0);
}
PIOS_Flash_W25X_Init(pios_spi_flash_accel_id);
PIOS_ADXL345_Attach(pios_spi_flash_accel_id);
PIOS_FLASHFS_Init();
#if defined(PIOS_INCLUDE_SPEKTRUM)
/* SPEKTRUM init must come before comms */
PIOS_SPEKTRUM_Init();
if (PIOS_USART_Init(&pios_usart_spektrum_id, &pios_usart_spektrum_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_COM_Init(&pios_com_spektrum_id, &pios_usart_com_driver, pios_usart_spektrum_id)) {
PIOS_DEBUG_Assert(0);
}
#endif
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
UAVObjectsInitializeAll();
/* Initialize the alarms library */
AlarmsInitialize();
/* Initialize the task monitor library */
TaskMonitorInitialize();
/* Initialize the PiOS library */
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_TELEMETRY_RF)
if (PIOS_USART_Init(&pios_usart_telem_rf_id, &pios_usart_telem_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_usart_com_driver, pios_usart_telem_rf_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* PIOS_INCLUDE_TELEMETRY_RF */
#if defined(PIOS_INCLUDE_GPS)
if (PIOS_USART_Init(&pios_usart_gps_id, &pios_usart_gps_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_COM_Init(&pios_com_gps_id, &pios_usart_com_driver, pios_usart_gps_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* PIOS_INCLUDE_GPS */
#if defined(PIOS_INCLUDE_SBUS)
PIOS_SBUS_Init();
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_cfg)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_COM_Init(&pios_com_sbus_id, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* PIOS_INCLUDE_SBUS */
#endif /* PIOS_INCLUDE_COM */
/* Remap AFIO pin */
GPIO_PinRemapConfig( GPIO_Remap_SWJ_NoJTRST, ENABLE);
PIOS_Servo_Init();
PIOS_ADC_Init();
PIOS_GPIO_Init();
#if defined(PIOS_INCLUDE_PWM)
PIOS_PWM_Init();
#endif
#if defined(PIOS_INCLUDE_PPM)
PIOS_PPM_Init();
#endif
#if defined(PIOS_INCLUDE_USB_HID)
PIOS_USB_HID_Init(0);
#if defined(PIOS_INCLUDE_COM)
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_com_driver, 0)) {
PIOS_DEBUG_Assert(0);
}
#endif /* PIOS_INCLUDE_COM */
#endif
#if defined(PIOS_INCLUDE_I2C)
if (PIOS_I2C_Init(&pios_i2c_main_adapter_id, &pios_i2c_main_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
#endif /* PIOS_INCLUDE_I2C */
PIOS_IAP_Init();
PIOS_WDG_Init();
}
/**
* @}
*/
Reference in New Issue View Git Blame Copy Permalink