rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-29 07:24:13 +01:00
Code Issues Releases Activity
d53dadaf6b
LibrePilot/flight/pios/stm32f10x/link_stm32f10x_HD.ld
Oleg Semyonov b6e1331e5d Rename flight/PiOS->flight/pios
2013-04-25 13:13:41 +03:00

412 lines
14 KiB
Plaintext
Raw Blame History

/**
******************************************************************************
*
* @file link_stm32f10x_HD.ld
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2009.
* @brief PiOS linker for the OpenPilot board
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Memory Spaces Definitions */
MEMORY
{
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 64K
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
FLASHB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0
EXTMEMB0 (rx) : ORIGIN = 0x00000000, LENGTH = 0
EXTMEMB1 (rx) : ORIGIN = 0x00000000, LENGTH = 0
EXTMEMB2 (rx) : ORIGIN = 0x00000000, LENGTH = 0
EXTMEMB3 (rx) : ORIGIN = 0x00000000, LENGTH = 0
}
/* higher address of the user mode stack */
_estack = 0x20010000;
/* default stack sizes.
These are used by the startup in order to allocate stacks for the different modes.
Note: FreeRTOS gives each task an own stack
*/
__Stack_Size = 128 ;
PROVIDE ( _Stack_Size = __Stack_Size ) ;
__Stack_Init = _estack - __Stack_Size ;
/*"PROVIDE" allows to easily override these values from an object file or the commmand line.*/
PROVIDE ( _Stack_Init = __Stack_Init ) ;
/*
There will be a link error if there is not this amount of RAM free at the end.
*/
_Minimum_Stack_Size = 0x100 ;
/* Check valid alignment for VTOR */
ASSERT(ORIGIN(FLASH) == ALIGN(ORIGIN(FLASH), 0x80), "Start of memory region flash not aligned for startup vector table");
/*
this sends all unreferenced IRQHandlers to reset
*/
PROVIDE ( Undefined_Handler = 0 ) ;
PROVIDE ( SWI_Handler = 0 ) ;
PROVIDE ( IRQ_Handler = 0 ) ;
PROVIDE ( Prefetch_Handler = 0 ) ;
PROVIDE ( Abort_Handler = 0 ) ;
PROVIDE ( FIQ_Handler = 0 ) ;
PROVIDE ( NMI_Handler = 0 ) ;
PROVIDE ( HardFault_Handler = 0 ) ;
PROVIDE ( MemManage_Handler = 0 ) ;
PROVIDE ( BusFault_Handler = 0 ) ;
PROVIDE ( UsageFault_Handler = 0 ) ;
PROVIDE ( SVC_Handler = 0 ) ;
PROVIDE ( DebugMon_Handler = 0 ) ;
PROVIDE ( PendSV_Handler = 0 ) ;
PROVIDE ( SysTick_Handler = 0 ) ;
PROVIDE ( WWDG_IRQHandler = 0 ) ;
PROVIDE ( PVD_IRQHandler = 0 ) ;
PROVIDE ( TAMPER_IRQHandler = 0 ) ;
PROVIDE ( RTC_IRQHandler = 0 ) ;
PROVIDE ( FLASH_IRQHandler = 0 ) ;
PROVIDE ( RCC_IRQHandler = 0 ) ;
PROVIDE ( EXTI0_IRQHandler = 0 ) ;
PROVIDE ( EXTI1_IRQHandler = 0 ) ;
PROVIDE ( EXTI2_IRQHandler = 0 ) ;
PROVIDE ( EXTI3_IRQHandler = 0 ) ;
PROVIDE ( EXTI4_IRQHandler = 0 ) ;
PROVIDE ( DMAChannel1_IRQHandler = 0 ) ;
PROVIDE ( DMAChannel2_IRQHandler = 0 ) ;
PROVIDE ( DMAChannel3_IRQHandler = 0 ) ;
PROVIDE ( DMAChannel4_IRQHandler = 0 ) ;
PROVIDE ( DMAChannel5_IRQHandler = 0 ) ;
PROVIDE ( DMAChannel6_IRQHandler = 0 ) ;
PROVIDE ( DMAChannel7_IRQHandler = 0 ) ;
PROVIDE ( ADC_IRQHandler = 0 ) ;
PROVIDE ( USB_HP_CAN1_TX_IRQHandler = 0 ) ;
PROVIDE ( USB_LP_CAN1_RX0_IRQHandler = 0 ) ;
PROVIDE ( CAN1_RX1_IRQHandler = 0 ) ;
PROVIDE ( CAN1_SCE_IRQHandler = 0 ) ;
PROVIDE ( EXTI9_5_IRQHandler = 0 ) ;
PROVIDE ( TIM1_BRK_IRQHandler = 0 ) ;
PROVIDE ( TIM1_UP_IRQHandler = 0 ) ;
PROVIDE ( TIM1_TRG_COM_IRQHandler = 0 ) ;
PROVIDE ( TIM1_CC_IRQHandler = 0 ) ;
PROVIDE ( TIM2_IRQHandler = 0 ) ;
PROVIDE ( TIM3_IRQHandler = 0 ) ;
PROVIDE ( TIM4_IRQHandler = 0 ) ;
PROVIDE ( I2C1_EV_IRQHandler = 0 ) ;
PROVIDE ( I2C1_ER_IRQHandler = 0 ) ;
PROVIDE ( I2C2_EV_IRQHandler = 0 ) ;
PROVIDE ( I2C2_ER_IRQHandler = 0 ) ;
PROVIDE ( SPI1_IRQHandler = 0 ) ;
PROVIDE ( SPI2_IRQHandler = 0 ) ;
PROVIDE ( USART1_IRQHandler = 0 ) ;
PROVIDE ( USART2_IRQHandler = 0 ) ;
PROVIDE ( USART3_IRQHandler = 0 ) ;
PROVIDE ( EXTI15_10_IRQHandler = 0 ) ;
PROVIDE ( RTCAlarm_IRQHandler = 0 ) ;
PROVIDE ( USBWakeUp_IRQHandler = 0 ) ;
PROVIDE ( TIM8_BRK_IRQHandler = 0 ) ;
PROVIDE ( TIM8_UP_IRQHandler = 0 ) ;
PROVIDE ( TIM8_TRG_COM_IRQHandler = 0 ) ;
PROVIDE ( TIM8_CC_IRQHandler = 0 ) ;
PROVIDE ( ADC3_IRQHandler = 0 ) ;
PROVIDE ( FSMC_IRQHandler = 0 ) ;
PROVIDE ( SDIO_IRQHandler = 0 ) ;
PROVIDE ( TIM5_IRQHandler = 0 ) ;
PROVIDE ( SPI3_IRQHandler = 0 ) ;
PROVIDE ( UART4_IRQHandler = 0 ) ;
PROVIDE ( UART5_IRQHandler = 0 ) ;
PROVIDE ( TIM6_IRQHandler = 0 ) ;
PROVIDE ( TIM7_IRQHandler = 0 ) ;
PROVIDE ( DMA2_Channel1_IRQHandler = 0 ) ;
PROVIDE ( DMA2_Channel2_IRQHandler = 0 ) ;
PROVIDE ( DMA2_Channel3_IRQHandler = 0 ) ;
PROVIDE ( DMA2_Channel4_5_IRQHandler = 0 ) ;
/******************************************************************************/
/* Peripheral memory map */
/******************************************************************************/
/*this allows to compile the ST lib in "non-debug" mode*/
/* Peripheral and SRAM base address in the alias region */
PERIPH_BB_BASE = 0x42000000;
SRAM_BB_BASE = 0x22000000;
/* Peripheral and SRAM base address in the bit-band region */
SRAM_BASE = 0x20000000;
PERIPH_BASE = 0x40000000;
/* Flash registers base address */
PROVIDE ( FLASH_BASE = 0x40022000);
/* Flash Option Bytes base address */
PROVIDE ( OB_BASE = 0x1FFFF800);
/* Peripheral memory map */
APB1PERIPH_BASE = PERIPH_BASE ;
APB2PERIPH_BASE = (PERIPH_BASE + 0x10000) ;
AHBPERIPH_BASE = (PERIPH_BASE + 0x20000) ;
PROVIDE ( TIM2 = (APB1PERIPH_BASE + 0x0000) ) ;
PROVIDE ( TIM3 = (APB1PERIPH_BASE + 0x0400) ) ;
PROVIDE ( TIM4 = (APB1PERIPH_BASE + 0x0800) ) ;
PROVIDE ( RTC = (APB1PERIPH_BASE + 0x2800) ) ;
PROVIDE ( WWDG = (APB1PERIPH_BASE + 0x2C00) ) ;
PROVIDE ( IWDG = (APB1PERIPH_BASE + 0x3000) ) ;
PROVIDE ( SPI2 = (APB1PERIPH_BASE + 0x3800) ) ;
PROVIDE ( USART2 = (APB1PERIPH_BASE + 0x4400) ) ;
PROVIDE ( USART3 = (APB1PERIPH_BASE + 0x4800) ) ;
PROVIDE ( I2C1 = (APB1PERIPH_BASE + 0x5400) ) ;
PROVIDE ( I2C2 = (APB1PERIPH_BASE + 0x5800) ) ;
PROVIDE ( CAN = (APB1PERIPH_BASE + 0x6400) ) ;
PROVIDE ( BKP = (APB1PERIPH_BASE + 0x6C00) ) ;
PROVIDE ( PWR = (APB1PERIPH_BASE + 0x7000) ) ;
PROVIDE ( AFIO = (APB2PERIPH_BASE + 0x0000) ) ;
PROVIDE ( EXTI = (APB2PERIPH_BASE + 0x0400) ) ;
PROVIDE ( GPIOA = (APB2PERIPH_BASE + 0x0800) ) ;
PROVIDE ( GPIOB = (APB2PERIPH_BASE + 0x0C00) ) ;
PROVIDE ( GPIOC = (APB2PERIPH_BASE + 0x1000) ) ;
PROVIDE ( GPIOD = (APB2PERIPH_BASE + 0x1400) ) ;
PROVIDE ( GPIOE = (APB2PERIPH_BASE + 0x1800) ) ;
PROVIDE ( ADC1 = (APB2PERIPH_BASE + 0x2400) ) ;
PROVIDE ( ADC2 = (APB2PERIPH_BASE + 0x2800) ) ;
PROVIDE ( TIM1 = (APB2PERIPH_BASE + 0x2C00) ) ;
PROVIDE ( SPI1 = (APB2PERIPH_BASE + 0x3000) ) ;
PROVIDE ( USART1 = (APB2PERIPH_BASE + 0x3800) ) ;
PROVIDE ( DMA = (AHBPERIPH_BASE + 0x0000) ) ;
PROVIDE ( DMA_Channel1 = (AHBPERIPH_BASE + 0x0008) ) ;
PROVIDE ( DMA_Channel2 = (AHBPERIPH_BASE + 0x001C) ) ;
PROVIDE ( DMA_Channel3 = (AHBPERIPH_BASE + 0x0030) ) ;
PROVIDE ( DMA_Channel4 = (AHBPERIPH_BASE + 0x0044) ) ;
PROVIDE ( DMA_Channel5 = (AHBPERIPH_BASE + 0x0058) ) ;
PROVIDE ( DMA_Channel6 = (AHBPERIPH_BASE + 0x006C) ) ;
PROVIDE ( DMA_Channel7 = (AHBPERIPH_BASE + 0x0080) ) ;
PROVIDE ( RCC = (AHBPERIPH_BASE + 0x1000) ) ;
/* System Control Space memory map */
SCS_BASE = 0xE000E000;
PROVIDE ( SysTick = (SCS_BASE + 0x0010) ) ;
PROVIDE ( NVIC = (SCS_BASE + 0x0100) ) ;
PROVIDE ( SCB = (SCS_BASE + 0x0D00) ) ;
/* Sections Definitions */
SECTIONS
{
/* for Cortex devices, the beginning of the startup code is stored in the .isr_vector section, which goes to FLASH */
.isr_vector :
{
KEEP(*(.isr_vector)) /* Startup code */
. = ALIGN(4);
} >FLASH
/* for some STRx devices, the beginning of the startup code is stored in the .flashtext section, which goes to FLASH */
.flashtext :
{
. = ALIGN(4);
*(.flashtext) /* Startup code */
. = ALIGN(4);
} >FLASH
/* the program code is stored in the .text section, which goes to Flash */
.text :
{
. = ALIGN(4);
*(.text) /* remaining code */
*(.text.*) /* remaining code */
*(.rodata) /* read-only data (constants) */
*(.rodata*)
*(.glue_7)
*(.glue_7t)
. = ALIGN(4);
_etext = .;
/* This is used by the startup in order to initialize the .data secion */
_sidata = _etext;
} >FLASH
/* This is the initialized data section
The program executes knowing that the data is in the RAM
but the loader puts the initial values in the FLASH (inidata).
It is one task of the startup to copy the initial values from FLASH to RAM. */
.data : AT ( _sidata )
{
. = ALIGN(4);
/* This is used by the startup in order to initialize the .data secion */
_sdata = . ;
*(.data)
*(.data.*)
. = ALIGN(4);
/* This is used by the startup in order to initialize the .data secion */
_edata = . ;
} >RAM
/* This is the uninitialized data section */
.bss :
{
. = ALIGN(4);
/* This is used by the startup in order to initialize the .bss secion */
_sbss = .;
*(.bss)
*(COMMON)
. = ALIGN(4);
/* This is used by the startup in order to initialize the .bss secion */
_ebss = . ;
} >RAM
PROVIDE ( end = _ebss );
PROVIDE ( _end = _ebss );
/* This is the user stack section
This is just to check that there is enough RAM left for the User mode stack
It should generate an error if it's full.
*/
._usrstack :
{
. = ALIGN(4);
_susrstack = . ;
. = . + _Minimum_Stack_Size ;
. = ALIGN(4);
_eusrstack = . ;
} >RAM
/* this is the FLASH Bank1 */
/* the C or assembly source must explicitly place the code or data there
using the "section" attribute */
.b1text :
{
*(.b1text) /* remaining code */
*(.b1rodata) /* read-only data (constants) */
*(.b1rodata*)
} >FLASHB1
/* this is the EXTMEM */
/* the C or assembly source must explicitly place the code or data there
using the "section" attribute */
/* EXTMEM Bank0 */
.eb0text :
{
*(.eb0text) /* remaining code */
*(.eb0rodata) /* read-only data (constants) */
*(.eb0rodata*)
} >EXTMEMB0
/* EXTMEM Bank1 */
.eb1text :
{
*(.eb1text) /* remaining code */
*(.eb1rodata) /* read-only data (constants) */
*(.eb1rodata*)
} >EXTMEMB1
/* EXTMEM Bank2 */
.eb2text :
{
*(.eb2text) /* remaining code */
*(.eb2rodata) /* read-only data (constants) */
*(.eb2rodata*)
} >EXTMEMB2
/* EXTMEM Bank0 */
.eb3text :
{
*(.eb3text) /* remaining code */
*(.eb3rodata) /* read-only data (constants) */
*(.eb3rodata*)
} >EXTMEMB3
__exidx_start = .;
__exidx_end = .;
/* after that it's only debugging information. */
/* remove the debugging information from the standard libraries */
/DISCARD/ :
{
libc.a ( * )
libm.a ( * )
libgcc.a ( * )
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
/* DWARF debug sections.
Symbols in the DWARF debugging sections are relative to the beginning
of the section so we begin them at 0. */
/* DWARF 1 */
.debug 0 : { *(.debug) }
.line 0 : { *(.line) }
/* GNU DWARF 1 extensions */
.debug_srcinfo 0 : { *(.debug_srcinfo) }
.debug_sfnames 0 : { *(.debug_sfnames) }
/* DWARF 1.1 and DWARF 2 */
.debug_aranges 0 : { *(.debug_aranges) }
.debug_pubnames 0 : { *(.debug_pubnames) }
/* DWARF 2 */
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_line 0 : { *(.debug_line) }
.debug_frame 0 : { *(.debug_frame) }
.debug_str 0 : { *(.debug_str) }
.debug_loc 0 : { *(.debug_loc) }
.debug_macinfo 0 : { *(.debug_macinfo) }
/* SGI/MIPS DWARF 2 extensions */
.debug_weaknames 0 : { *(.debug_weaknames) }
.debug_funcnames 0 : { *(.debug_funcnames) }
.debug_typenames 0 : { *(.debug_typenames) }
.debug_varnames 0 : { *(.debug_varnames) }
}
Reference in New Issue View Git Blame Copy Permalink