mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-04 12:24:11 +01:00
02c981388a
# Conflicts: # flight/targets/boards/coptercontrol/board_hw_defs.c # flight/targets/boards/coptercontrol/firmware/pios_board.c # flight/targets/boards/revolution/board_hw_defs.c # flight/targets/boards/revolution/firmware/inc/pios_config.h # flight/targets/boards/revolution/firmware/pios_board.c # flight/targets/boards/revonano/firmware/inc/pios_config.h # flight/targets/boards/revonano/firmware/pios_board.c # shared/uavobjectdefinition/hwsettings.xml # shared/uavobjectdefinition/manualcontrolsettings.xml # shared/uavobjectdefinition/receiveractivity.xml
1657 lines
51 KiB
C
1657 lines
51 KiB
C
/**
|
|
******************************************************************************
|
|
* @file board_hw_defs.c
|
|
* @author The LibrePilot Project, http://www.librepilot.org Copyright (C) 2015.
|
|
* The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012.
|
|
* PhoenixPilot, http://github.com/PhoenixPilot, Copyright (C) 2012
|
|
*
|
|
* @addtogroup OpenPilotSystem OpenPilot System
|
|
* @{
|
|
* @addtogroup OpenPilotCore OpenPilot Core
|
|
* @{
|
|
* @brief Defines board specific static initializers for hardware for the CopterControl board.
|
|
*****************************************************************************/
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#define BOARD_REVISION_CC 1
|
|
#define BOARD_REVISION_CC3D 2
|
|
|
|
#if defined(PIOS_INCLUDE_LED)
|
|
|
|
#include <pios_led_priv.h>
|
|
static const struct pios_gpio pios_leds_cc[] = {
|
|
[PIOS_LED_HEARTBEAT] = {
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_6,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
},
|
|
},
|
|
.active_low = true
|
|
},
|
|
};
|
|
|
|
static const struct pios_gpio_cfg pios_led_cfg_cc = {
|
|
.gpios = pios_leds_cc,
|
|
.num_gpios = NELEMENTS(pios_leds_cc),
|
|
};
|
|
|
|
static const struct pios_gpio pios_leds_cc3d[] = {
|
|
[PIOS_LED_HEARTBEAT] = {
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_3,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
},
|
|
},
|
|
.remap = GPIO_Remap_SWJ_JTAGDisable,
|
|
.active_low = true
|
|
},
|
|
};
|
|
|
|
static const struct pios_gpio_cfg pios_led_cfg_cc3d = {
|
|
.gpios = pios_leds_cc3d,
|
|
.num_gpios = NELEMENTS(pios_leds_cc3d),
|
|
};
|
|
|
|
const struct pios_gpio_cfg *PIOS_BOARD_HW_DEFS_GetLedCfg(uint32_t board_revision)
|
|
{
|
|
switch (board_revision) {
|
|
case BOARD_REVISION_CC: return &pios_led_cfg_cc;
|
|
|
|
case BOARD_REVISION_CC3D: return &pios_led_cfg_cc3d;
|
|
|
|
default: return NULL;
|
|
}
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_LED */
|
|
|
|
#if defined(PIOS_INCLUDE_SPI)
|
|
|
|
#include <pios_spi_priv.h>
|
|
|
|
/* Gyro interface */
|
|
void PIOS_SPI_gyro_irq_handler(void);
|
|
void DMA1_Channel2_IRQHandler() __attribute__((alias("PIOS_SPI_gyro_irq_handler")));
|
|
void DMA1_Channel3_IRQHandler() __attribute__((alias("PIOS_SPI_gyro_irq_handler")));
|
|
static const struct pios_spi_cfg pios_spi_gyro_cfg = {
|
|
.regs = SPI1,
|
|
.init = {
|
|
.SPI_Mode = SPI_Mode_Master,
|
|
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
|
|
.SPI_DataSize = SPI_DataSize_8b,
|
|
.SPI_NSS = SPI_NSS_Soft,
|
|
.SPI_FirstBit = SPI_FirstBit_MSB,
|
|
.SPI_CRCPolynomial = 7,
|
|
.SPI_CPOL = SPI_CPOL_High,
|
|
.SPI_CPHA = SPI_CPHA_2Edge,
|
|
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16, /* 10 Mhz */
|
|
},
|
|
.use_crc = false,
|
|
.dma = {
|
|
.ahb_clk = RCC_AHBPeriph_DMA1,
|
|
|
|
.irq = {
|
|
.flags = (DMA1_FLAG_TC2 | DMA1_FLAG_TE2 | DMA1_FLAG_HT2 | DMA1_FLAG_GL2),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA1_Channel2_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
|
|
.rx = {
|
|
.channel = DMA1_Channel2,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_Medium,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
.tx = {
|
|
.channel = DMA1_Channel3,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralDST,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_Medium,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
},
|
|
.sclk = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_5,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
.miso = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_6,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.mosi = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_7,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
.slave_count = 1,
|
|
.ssel = {
|
|
{
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_4,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
},
|
|
}
|
|
},
|
|
};
|
|
|
|
static uint32_t pios_spi_gyro_id;
|
|
void PIOS_SPI_gyro_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_SPI_IRQ_Handler(pios_spi_gyro_id);
|
|
}
|
|
|
|
|
|
/* Flash/Accel Interface
|
|
*
|
|
* NOTE: Leave this declared as const data so that it ends up in the
|
|
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
|
|
*/
|
|
void PIOS_SPI_flash_accel_irq_handler(void);
|
|
void DMA1_Channel4_IRQHandler() __attribute__((alias("PIOS_SPI_flash_accel_irq_handler")));
|
|
void DMA1_Channel5_IRQHandler() __attribute__((alias("PIOS_SPI_flash_accel_irq_handler")));
|
|
static const struct pios_spi_cfg pios_spi_flash_accel_cfg_cc3d = {
|
|
.regs = SPI2,
|
|
.init = {
|
|
.SPI_Mode = SPI_Mode_Master,
|
|
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
|
|
.SPI_DataSize = SPI_DataSize_8b,
|
|
.SPI_NSS = SPI_NSS_Soft,
|
|
.SPI_FirstBit = SPI_FirstBit_MSB,
|
|
.SPI_CRCPolynomial = 7,
|
|
.SPI_CPOL = SPI_CPOL_High,
|
|
.SPI_CPHA = SPI_CPHA_2Edge,
|
|
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8,
|
|
},
|
|
.use_crc = false,
|
|
.dma = {
|
|
.ahb_clk = RCC_AHBPeriph_DMA1,
|
|
|
|
.irq = {
|
|
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
|
|
.rx = {
|
|
.channel = DMA1_Channel4,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_High,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
.tx = {
|
|
.channel = DMA1_Channel5,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralDST,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_High,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
},
|
|
.sclk = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_13,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
.miso = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_14,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
.mosi = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_15,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
.slave_count = 2,
|
|
.ssel = {
|
|
{
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_12,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
}
|
|
},{
|
|
.gpio = GPIOC,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_15,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
},
|
|
}
|
|
},
|
|
};
|
|
|
|
static const struct pios_spi_cfg pios_spi_flash_accel_cfg_cc = {
|
|
.regs = SPI2,
|
|
.init = {
|
|
.SPI_Mode = SPI_Mode_Master,
|
|
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
|
|
.SPI_DataSize = SPI_DataSize_8b,
|
|
.SPI_NSS = SPI_NSS_Soft,
|
|
.SPI_FirstBit = SPI_FirstBit_MSB,
|
|
.SPI_CRCPolynomial = 7,
|
|
.SPI_CPOL = SPI_CPOL_High,
|
|
.SPI_CPHA = SPI_CPHA_2Edge,
|
|
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8,
|
|
},
|
|
.use_crc = false,
|
|
.dma = {
|
|
.ahb_clk = RCC_AHBPeriph_DMA1,
|
|
|
|
.irq = {
|
|
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
|
|
.rx = {
|
|
.channel = DMA1_Channel4,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_High,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
.tx = {
|
|
.channel = DMA1_Channel5,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
|
|
.DMA_DIR = DMA_DIR_PeripheralDST,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
|
|
.DMA_Mode = DMA_Mode_Normal,
|
|
.DMA_Priority = DMA_Priority_High,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
},
|
|
},
|
|
.sclk = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_13,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
.miso = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_14,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
.mosi = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_15,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
.slave_count = 2,
|
|
.ssel = {
|
|
{
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_12,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
}
|
|
},{
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_7,
|
|
.GPIO_Speed = GPIO_Speed_50MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
},
|
|
}
|
|
},
|
|
};
|
|
|
|
static uint32_t pios_spi_flash_accel_id;
|
|
void PIOS_SPI_flash_accel_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_SPI_IRQ_Handler(pios_spi_flash_accel_id);
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_SPI */
|
|
|
|
#if defined(PIOS_INCLUDE_FLASH)
|
|
#include "pios_flashfs_logfs_priv.h"
|
|
#include "pios_flash_jedec_priv.h"
|
|
|
|
static const struct flashfs_logfs_cfg flashfs_w25x_cfg = {
|
|
.fs_magic = 0x99abcdef,
|
|
.total_fs_size = 0x00080000, /* 512K bytes (128 sectors = entire chip) */
|
|
.arena_size = 0x00010000, /* 256 * slot size */
|
|
.slot_size = 0x00000100, /* 256 bytes */
|
|
|
|
.start_offset = 0, /* start at the beginning of the chip */
|
|
.sector_size = 0x00001000, /* 4K bytes */
|
|
.page_size = 0x00000100, /* 256 bytes */
|
|
};
|
|
|
|
|
|
static const struct flashfs_logfs_cfg flashfs_m25p_cfg = {
|
|
.fs_magic = 0x99abceef,
|
|
.total_fs_size = 0x00200000, /* 2M bytes (32 sectors = entire chip) */
|
|
.arena_size = 0x00010000, /* 256 * slot size */
|
|
.slot_size = 0x00000100, /* 256 bytes */
|
|
|
|
.start_offset = 0, /* start at the beginning of the chip */
|
|
.sector_size = 0x00010000, /* 64K bytes */
|
|
.page_size = 0x00000100, /* 256 bytes */
|
|
};
|
|
|
|
#include "pios_flash.h"
|
|
|
|
#endif /* PIOS_INCLUDE_FLASH */
|
|
|
|
/*
|
|
* ADC system
|
|
*/
|
|
#if defined(PIOS_INCLUDE_ADC)
|
|
#include "pios_adc_priv.h"
|
|
extern void PIOS_ADC_handler(void);
|
|
void DMA1_Channel1_IRQHandler() __attribute__((alias("PIOS_ADC_handler")));
|
|
// Remap the ADC DMA handler to this one
|
|
static const struct pios_adc_cfg pios_adc_cfg = {
|
|
.dma = {
|
|
.ahb_clk = RCC_AHBPeriph_DMA1,
|
|
.irq = {
|
|
.flags = (DMA1_FLAG_TC1 | DMA1_FLAG_TE1 | DMA1_FLAG_HT1 | DMA1_FLAG_GL1),
|
|
.init = {
|
|
.NVIC_IRQChannel = DMA1_Channel1_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.channel = DMA1_Channel1,
|
|
.init = {
|
|
.DMA_PeripheralBaseAddr = (uint32_t)&ADC1->DR,
|
|
.DMA_DIR = DMA_DIR_PeripheralSRC,
|
|
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
|
|
.DMA_MemoryInc = DMA_MemoryInc_Enable,
|
|
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word,
|
|
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
|
|
.DMA_Mode = DMA_Mode_Circular,
|
|
.DMA_Priority = DMA_Priority_High,
|
|
.DMA_M2M = DMA_M2M_Disable,
|
|
},
|
|
}
|
|
},
|
|
.half_flag = DMA1_IT_HT1,
|
|
.full_flag = DMA1_IT_TC1,
|
|
};
|
|
|
|
void PIOS_ADC_handler()
|
|
{
|
|
PIOS_ADC_DMA_Handler();
|
|
}
|
|
#endif /* if defined(PIOS_INCLUDE_ADC) */
|
|
|
|
#include "pios_tim_priv.h"
|
|
|
|
static const TIM_TimeBaseInitTypeDef tim_1_2_3_4_time_base = {
|
|
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
|
|
.TIM_ClockDivision = TIM_CKD_DIV1,
|
|
.TIM_CounterMode = TIM_CounterMode_Up,
|
|
.TIM_Period = ((1000000 / PIOS_SERVO_UPDATE_HZ) - 1),
|
|
.TIM_RepetitionCounter = 0x0000,
|
|
};
|
|
|
|
static const struct pios_tim_clock_cfg tim_1_cfg = {
|
|
.timer = TIM1,
|
|
.time_base_init = &tim_1_2_3_4_time_base,
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = TIM1_CC_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_tim_clock_cfg tim_2_cfg = {
|
|
.timer = TIM2,
|
|
.time_base_init = &tim_1_2_3_4_time_base,
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = TIM2_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_tim_clock_cfg tim_3_cfg = {
|
|
.timer = TIM3,
|
|
.time_base_init = &tim_1_2_3_4_time_base,
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = TIM3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_tim_clock_cfg tim_4_cfg = {
|
|
.timer = TIM4,
|
|
.time_base_init = &tim_1_2_3_4_time_base,
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = TIM4_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_tim_channel pios_tim_rcvrport_all_channels[] = {
|
|
{
|
|
.timer = TIM4,
|
|
.timer_chan = TIM_Channel_1,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_6,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_2,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_5,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
.remap = GPIO_PartialRemap_TIM3,
|
|
},
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_3,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_0,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_4,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_1,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM2,
|
|
.timer_chan = TIM_Channel_1,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_0,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM2,
|
|
.timer_chan = TIM_Channel_2,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_1,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_tim_channel pios_tim_servoport_all_pins[] = {
|
|
{
|
|
.timer = TIM4,
|
|
.timer_chan = TIM_Channel_4,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_9,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM4,
|
|
.timer_chan = TIM_Channel_3,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_8,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM4,
|
|
.timer_chan = TIM_Channel_2,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_7,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM1,
|
|
.timer_chan = TIM_Channel_1,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_8,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_1,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_4,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
.remap = GPIO_PartialRemap_TIM3,
|
|
},
|
|
{
|
|
.timer = TIM2,
|
|
.timer_chan = TIM_Channel_3,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_2,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
};
|
|
|
|
|
|
static const struct pios_tim_channel pios_tim_servoport_rcvrport_pins[] = {
|
|
{
|
|
.timer = TIM4,
|
|
.timer_chan = TIM_Channel_4,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_9,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM4,
|
|
.timer_chan = TIM_Channel_3,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_8,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM4,
|
|
.timer_chan = TIM_Channel_2,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_7,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM1,
|
|
.timer_chan = TIM_Channel_1,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_8,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_1,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_4,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
.remap = GPIO_PartialRemap_TIM3,
|
|
},
|
|
{
|
|
.timer = TIM2,
|
|
.timer_chan = TIM_Channel_3,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_2,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
|
|
// Receiver port pins
|
|
// S3-S6 inputs are used as outputs in this case
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_3,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_0,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_4,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_1,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM2,
|
|
.timer_chan = TIM_Channel_1,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_0,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
{
|
|
.timer = TIM2,
|
|
.timer_chan = TIM_Channel_2,
|
|
.pin = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_1,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_tim_channel pios_tim_ppm_flexi_port = {
|
|
.timer = TIM2,
|
|
.timer_chan = TIM_Channel_4,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
.remap = GPIO_PartialRemap2_TIM2,
|
|
};
|
|
|
|
#if defined(PIOS_INCLUDE_USART)
|
|
|
|
#include "pios_usart_priv.h"
|
|
|
|
static const struct pios_usart_cfg pios_usart_generic_main_cfg = {
|
|
.regs = USART1,
|
|
.init = {
|
|
.USART_BaudRate = 57600,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART1_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_9,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_usart_cfg pios_usart_generic_flexi_cfg = {
|
|
.regs = USART3,
|
|
.init = {
|
|
.USART_BaudRate = 57600,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
#if defined(PIOS_INCLUDE_DSM)
|
|
/*
|
|
* Spektrum/JR DSM USART
|
|
*/
|
|
#include <pios_dsm_priv.h>
|
|
|
|
static const struct pios_usart_cfg pios_usart_dsm_main_cfg = {
|
|
.regs = USART1,
|
|
.init = {
|
|
.USART_BaudRate = 115200,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART1_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_9,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_dsm_cfg pios_dsm_main_cfg = {
|
|
.bind = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_usart_cfg pios_usart_dsm_flexi_cfg = {
|
|
.regs = USART3,
|
|
.init = {
|
|
.USART_BaudRate = 115200,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_dsm_cfg pios_dsm_flexi_cfg = {
|
|
.bind = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_DSM */
|
|
|
|
#if defined(PIOS_INCLUDE_HOTT)
|
|
/*
|
|
* HOTT USART
|
|
*/
|
|
#include <pios_hott_priv.h>
|
|
|
|
static const struct pios_usart_cfg pios_usart_hott_flexi_cfg = {
|
|
.regs = USART3,
|
|
.init = {
|
|
.USART_BaudRate = 115200,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
};
|
|
#endif /* PIOS_INCLUDE_HOTT */
|
|
|
|
#if defined(PIOS_INCLUDE_EXBUS)
|
|
/*
|
|
* EXBUS USART
|
|
*/
|
|
#include <pios_exbus_priv.h>
|
|
|
|
static const struct pios_usart_cfg pios_usart_exbus_flexi_cfg = {
|
|
.regs = USART3,
|
|
.init = {
|
|
.USART_BaudRate = 125000,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
};
|
|
#endif /* PIOS_INCLUDE_EXBUS */
|
|
|
|
#if defined(PIOS_INCLUDE_SRXL)
|
|
/*
|
|
* SRXL USART
|
|
*/
|
|
#include <pios_srxl_priv.h>
|
|
|
|
static const struct pios_usart_cfg pios_usart_srxl_flexi_cfg = {
|
|
.regs = USART3,
|
|
.init = {
|
|
.USART_BaudRate = 115200,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_SRXL */
|
|
|
|
#if defined(PIOS_INCLUDE_SBUS)
|
|
/*
|
|
* S.Bus USART
|
|
*/
|
|
#include <pios_sbus_priv.h>
|
|
|
|
static const struct pios_usart_cfg pios_usart_sbus_main_cfg = {
|
|
.regs = USART1,
|
|
.init = {
|
|
.USART_BaudRate = 100000,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_Even,
|
|
.USART_StopBits = USART_StopBits_2,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART1_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_9,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_sbus_cfg pios_sbus_cfg = {
|
|
/* Inverter configuration */
|
|
.inv = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_2,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
.gpio_clk_func = RCC_APB2PeriphClockCmd,
|
|
.gpio_clk_periph = RCC_APB2Periph_GPIOB,
|
|
.gpio_inv_enable = Bit_SET,
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_SBUS */
|
|
|
|
/*
|
|
* HK OSD
|
|
*/
|
|
static const struct pios_usart_cfg pios_usart_hkosd_main_cfg = {
|
|
.regs = USART1,
|
|
.init = {
|
|
.USART_BaudRate = 57600,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART1_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOA,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_9,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
static const struct pios_usart_cfg pios_usart_hkosd_flexi_cfg = {
|
|
.regs = USART3,
|
|
.init = {
|
|
.USART_BaudRate = 57600,
|
|
.USART_WordLength = USART_WordLength_8b,
|
|
.USART_Parity = USART_Parity_No,
|
|
.USART_StopBits = USART_StopBits_1,
|
|
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
|
|
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
|
|
},
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USART3_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.rx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_IPU,
|
|
},
|
|
},
|
|
.tx = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_PP,
|
|
},
|
|
},
|
|
};
|
|
|
|
|
|
#endif /* PIOS_INCLUDE_USART */
|
|
|
|
#if defined(PIOS_INCLUDE_COM)
|
|
|
|
#include "pios_com_priv.h"
|
|
|
|
#endif /* PIOS_INCLUDE_COM */
|
|
|
|
#if defined(PIOS_INCLUDE_RTC)
|
|
/*
|
|
* Realtime Clock (RTC)
|
|
*/
|
|
#include <pios_rtc_priv.h>
|
|
|
|
void PIOS_RTC_IRQ_Handler(void);
|
|
void RTC_IRQHandler() __attribute__((alias("PIOS_RTC_IRQ_Handler")));
|
|
static const struct pios_rtc_cfg pios_rtc_main_cfg = {
|
|
.clksrc = RCC_RTCCLKSource_HSE_Div128,
|
|
.prescaler = 100,
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = RTC_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
void PIOS_RTC_IRQ_Handler(void)
|
|
{
|
|
PIOS_RTC_irq_handler();
|
|
}
|
|
|
|
#endif /* if defined(PIOS_INCLUDE_RTC) */
|
|
|
|
#if defined(PIOS_INCLUDE_SERVO) && defined(PIOS_INCLUDE_TIM)
|
|
/*
|
|
* Servo outputs
|
|
*/
|
|
#include <pios_servo_priv.h>
|
|
|
|
const struct pios_servo_cfg pios_servo_cfg = {
|
|
.tim_oc_init = {
|
|
.TIM_OCMode = TIM_OCMode_PWM1,
|
|
.TIM_OutputState = TIM_OutputState_Enable,
|
|
.TIM_OutputNState = TIM_OutputNState_Disable,
|
|
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
|
|
.TIM_OCPolarity = TIM_OCPolarity_High,
|
|
.TIM_OCNPolarity = TIM_OCPolarity_High,
|
|
.TIM_OCIdleState = TIM_OCIdleState_Reset,
|
|
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
|
|
},
|
|
.channels = pios_tim_servoport_all_pins,
|
|
.num_channels = NELEMENTS(pios_tim_servoport_all_pins),
|
|
};
|
|
|
|
const struct pios_servo_cfg pios_servo_rcvr_cfg = {
|
|
.tim_oc_init = {
|
|
.TIM_OCMode = TIM_OCMode_PWM1,
|
|
.TIM_OutputState = TIM_OutputState_Enable,
|
|
.TIM_OutputNState = TIM_OutputNState_Disable,
|
|
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
|
|
.TIM_OCPolarity = TIM_OCPolarity_High,
|
|
.TIM_OCNPolarity = TIM_OCPolarity_High,
|
|
.TIM_OCIdleState = TIM_OCIdleState_Reset,
|
|
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
|
|
},
|
|
.channels = pios_tim_servoport_rcvrport_pins,
|
|
.num_channels = NELEMENTS(pios_tim_servoport_rcvrport_pins),
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_SERVO && PIOS_INCLUDE_TIM */
|
|
|
|
/*
|
|
* PPM Inputs
|
|
*/
|
|
#if defined(PIOS_INCLUDE_PPM)
|
|
#include <pios_ppm_priv.h>
|
|
|
|
const struct pios_ppm_cfg pios_ppm_cfg = {
|
|
.tim_ic_init = {
|
|
.TIM_ICPolarity = TIM_ICPolarity_Rising,
|
|
.TIM_ICSelection = TIM_ICSelection_DirectTI,
|
|
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
|
|
.TIM_ICFilter = 0x0,
|
|
},
|
|
/* Use only the first channel for ppm */
|
|
.channels = &pios_tim_rcvrport_all_channels[0],
|
|
.num_channels = 1,
|
|
};
|
|
|
|
const struct pios_ppm_cfg pios_ppm_pin8_cfg = {
|
|
.tim_ic_init = {
|
|
.TIM_ICPolarity = TIM_ICPolarity_Rising,
|
|
.TIM_ICSelection = TIM_ICSelection_DirectTI,
|
|
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
|
|
.TIM_ICFilter = 0x0,
|
|
},
|
|
/* Use only the first channel for ppm */
|
|
.channels = &pios_tim_rcvrport_all_channels[5],
|
|
.num_channels = 1,
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_PPM */
|
|
|
|
#if defined(PIOS_INCLUDE_PPM_FLEXI)
|
|
#include <pios_ppm_priv.h>
|
|
|
|
const struct pios_ppm_cfg pios_ppm_flexi_cfg = {
|
|
.tim_ic_init = {
|
|
.TIM_ICPolarity = TIM_ICPolarity_Rising,
|
|
.TIM_ICSelection = TIM_ICSelection_DirectTI,
|
|
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
|
|
.TIM_ICFilter = 0x0,
|
|
},
|
|
.channels = &pios_tim_ppm_flexi_port,
|
|
.num_channels = 1,
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_PPM_FLEXI */
|
|
|
|
/*
|
|
* PWM Inputs
|
|
*/
|
|
#if defined(PIOS_INCLUDE_PWM)
|
|
#include <pios_pwm_priv.h>
|
|
|
|
const struct pios_pwm_cfg pios_pwm_cfg = {
|
|
.tim_ic_init = {
|
|
.TIM_ICPolarity = TIM_ICPolarity_Rising,
|
|
.TIM_ICSelection = TIM_ICSelection_DirectTI,
|
|
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
|
|
.TIM_ICFilter = 0x0,
|
|
},
|
|
.channels = pios_tim_rcvrport_all_channels,
|
|
.num_channels = NELEMENTS(pios_tim_rcvrport_all_channels),
|
|
};
|
|
|
|
const struct pios_pwm_cfg pios_pwm_with_ppm_cfg = {
|
|
.tim_ic_init = {
|
|
.TIM_ICPolarity = TIM_ICPolarity_Rising,
|
|
.TIM_ICSelection = TIM_ICSelection_DirectTI,
|
|
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
|
|
.TIM_ICFilter = 0x0,
|
|
},
|
|
/* Leave the first channel for PPM use and use the rest for PWM */
|
|
.channels = &pios_tim_rcvrport_all_channels[1],
|
|
.num_channels = NELEMENTS(pios_tim_rcvrport_all_channels) - 1,
|
|
};
|
|
|
|
#endif /* if defined(PIOS_INCLUDE_PWM) */
|
|
|
|
|
|
/*
|
|
* SONAR Inputs
|
|
*/
|
|
#if defined(PIOS_INCLUDE_HCSR04)
|
|
#include <pios_hcsr04_priv.h>
|
|
|
|
static const struct pios_tim_channel pios_tim_hcsr04_port_all_channels[] = {
|
|
{
|
|
.timer = TIM3,
|
|
.timer_chan = TIM_Channel_2,
|
|
.pin = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_5,
|
|
.GPIO_Mode = GPIO_Mode_IPD,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
.remap = GPIO_PartialRemap_TIM3,
|
|
},
|
|
};
|
|
|
|
const struct pios_hcsr04_cfg pios_hcsr04_cfg = {
|
|
.tim_ic_init = {
|
|
.TIM_ICPolarity = TIM_ICPolarity_Rising,
|
|
.TIM_ICSelection = TIM_ICSelection_DirectTI,
|
|
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
|
|
.TIM_ICFilter = 0x0,
|
|
},
|
|
.channels = pios_tim_hcsr04_port_all_channels,
|
|
.num_channels = NELEMENTS(pios_tim_hcsr04_port_all_channels),
|
|
.trigger = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_6,
|
|
.GPIO_Mode = GPIO_Mode_Out_PP,
|
|
.GPIO_Speed = GPIO_Speed_2MHz,
|
|
},
|
|
},
|
|
};
|
|
#endif /* if defined(PIOS_INCLUDE_HCSR04) */
|
|
|
|
#if defined(PIOS_INCLUDE_I2C)
|
|
|
|
#include <pios_i2c_priv.h>
|
|
|
|
/*
|
|
* I2C Adapters
|
|
*/
|
|
|
|
void PIOS_I2C_flexi_adapter_ev_irq_handler(void);
|
|
void PIOS_I2C_flexi_adapter_er_irq_handler(void);
|
|
void I2C2_EV_IRQHandler() __attribute__((alias("PIOS_I2C_flexi_adapter_ev_irq_handler")));
|
|
void I2C2_ER_IRQHandler() __attribute__((alias("PIOS_I2C_flexi_adapter_er_irq_handler")));
|
|
|
|
static const struct pios_i2c_adapter_cfg pios_i2c_flexi_adapter_cfg = {
|
|
.regs = I2C2,
|
|
.init = {
|
|
.I2C_Mode = I2C_Mode_I2C,
|
|
.I2C_OwnAddress1 = 0,
|
|
.I2C_Ack = I2C_Ack_Enable,
|
|
.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit,
|
|
.I2C_DutyCycle = I2C_DutyCycle_2,
|
|
.I2C_ClockSpeed = 400000, /* bits/s */
|
|
},
|
|
.transfer_timeout_ms = 50,
|
|
.scl = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_10,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_OD,
|
|
},
|
|
},
|
|
.sda = {
|
|
.gpio = GPIOB,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_11,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_OD,
|
|
},
|
|
},
|
|
.event = {
|
|
.flags = 0, /* FIXME: check this */
|
|
.init = {
|
|
.NVIC_IRQChannel = I2C2_EV_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.error = {
|
|
.flags = 0, /* FIXME: check this */
|
|
.init = {
|
|
.NVIC_IRQChannel = I2C2_ER_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
};
|
|
|
|
uint32_t pios_i2c_flexi_adapter_id;
|
|
void PIOS_I2C_flexi_adapter_ev_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_I2C_EV_IRQ_Handler(pios_i2c_flexi_adapter_id);
|
|
}
|
|
|
|
void PIOS_I2C_flexi_adapter_er_irq_handler(void)
|
|
{
|
|
/* Call into the generic code to handle the IRQ for this specific device */
|
|
PIOS_I2C_ER_IRQ_Handler(pios_i2c_flexi_adapter_id);
|
|
}
|
|
|
|
#endif /* PIOS_INCLUDE_I2C */
|
|
|
|
#if defined(PIOS_INCLUDE_GCSRCVR)
|
|
#include "pios_gcsrcvr_priv.h"
|
|
#endif /* PIOS_INCLUDE_GCSRCVR */
|
|
|
|
#if defined(PIOS_INCLUDE_RCVR)
|
|
#include "pios_rcvr_priv.h"
|
|
|
|
#endif /* PIOS_INCLUDE_RCVR */
|
|
|
|
#if defined(PIOS_INCLUDE_USB)
|
|
#include "pios_usb_priv.h"
|
|
|
|
static const struct pios_usb_cfg pios_usb_main_cfg_cc = {
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.vsense = {
|
|
.gpio = GPIOC,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_15,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_OD,
|
|
},
|
|
},
|
|
.vsense_active_low = false
|
|
};
|
|
|
|
static const struct pios_usb_cfg pios_usb_main_cfg_cc3d = {
|
|
.irq = {
|
|
.init = {
|
|
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
|
|
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
|
|
.NVIC_IRQChannelSubPriority = 0,
|
|
.NVIC_IRQChannelCmd = ENABLE,
|
|
},
|
|
},
|
|
.vsense = {
|
|
.gpio = GPIOC,
|
|
.init = {
|
|
.GPIO_Pin = GPIO_Pin_14,
|
|
.GPIO_Speed = GPIO_Speed_10MHz,
|
|
.GPIO_Mode = GPIO_Mode_AF_OD,
|
|
},
|
|
},
|
|
.vsense_active_low = false
|
|
};
|
|
|
|
#include "pios_usb_board_data_priv.h"
|
|
#include "pios_usb_desc_hid_cdc_priv.h"
|
|
#include "pios_usb_desc_hid_only_priv.h"
|
|
|
|
#endif /* PIOS_INCLUDE_USB */
|
|
|
|
#if defined(PIOS_INCLUDE_COM_MSG)
|
|
|
|
#include <pios_com_msg_priv.h>
|
|
|
|
#endif /* PIOS_INCLUDE_COM_MSG */
|
|
|
|
#if defined(PIOS_INCLUDE_USB_HID)
|
|
#include <pios_usb_hid_priv.h>
|
|
|
|
const struct pios_usb_hid_cfg pios_usb_hid_cfg = {
|
|
.data_if = 2,
|
|
.data_rx_ep = 1,
|
|
.data_tx_ep = 1,
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_USB_HID */
|
|
|
|
#if defined(PIOS_INCLUDE_USB_RCTX)
|
|
#include <pios_usb_rctx_priv.h>
|
|
|
|
const struct pios_usb_rctx_cfg pios_usb_rctx_cfg = {
|
|
.data_if = 2,
|
|
.data_tx_ep = 1,
|
|
};
|
|
|
|
#endif /* PIOS_INCLUDE_USB_RCTX */
|
|
|
|
#if defined(PIOS_INCLUDE_USB_CDC)
|
|
#include <pios_usb_cdc_priv.h>
|
|
|
|
const struct pios_usb_cdc_cfg pios_usb_cdc_cfg = {
|
|
.ctrl_if = 0,
|
|
.ctrl_tx_ep = 2,
|
|
|
|
.data_if = 1,
|
|
.data_rx_ep = 3,
|
|
.data_tx_ep = 3,
|
|
};
|
|
#endif /* PIOS_INCLUDE_USB_CDC */
|