1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-13 20:48:42 +01:00
LibrePilot/flight/targets/boards/revolution/pios_board.h
m_thread b0b1a42aec OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00

325 lines
11 KiB
C

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
* @file pios_board.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012.
* @brief Defines board hardware for the OpenPilot Version 1.1 hardware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_BOARD_H
#define PIOS_BOARD_H
#include <stdbool.h>
// ------------------------
// Timers and Channels Used
// ------------------------
/*
Timer | Channel 1 | Channel 2 | Channel 3 | Channel 4
------+-----------+-----------+-----------+----------
TIM1 | | | |
TIM2 | --------------- PIOS_DELAY -----------------
TIM3 | | | |
TIM4 | | | |
TIM5 | | | |
TIM6 | | | |
TIM7 | | | |
TIM8 | | | |
------+-----------+-----------+-----------+----------
*/
// ------------------------
// DMA Channels Used
// ------------------------
/* Channel 1 - */
/* Channel 2 - SPI1 RX */
/* Channel 3 - SPI1 TX */
/* Channel 4 - SPI2 RX */
/* Channel 5 - SPI2 TX */
/* Channel 6 - */
/* Channel 7 - */
/* Channel 8 - */
/* Channel 9 - */
/* Channel 10 - */
/* Channel 11 - */
/* Channel 12 - */
// ------------------------
// BOOTLOADER_SETTINGS
// ------------------------
#define BOARD_READABLE true
#define BOARD_WRITABLE true
#define MAX_DEL_RETRYS 3
// ------------------------
// PIOS_LED
// ------------------------
#define PIOS_LED_HEARTBEAT 0
#define PIOS_LED_ALARM 1
#ifdef PIOS_RFM22B_DEBUG_ON_TELEM
#define PIOS_LED_D1 2
#define PIOS_LED_D2 3
#define PIOS_LED_D3 4
#define PIOS_LED_D4 5
#define D1_LED_ON PIOS_LED_On(PIOS_LED_D1)
#define D1_LED_OFF PIOS_LED_Off(PIOS_LED_D1)
#define D1_LED_TOGGLE PIOS_LED_Toggle(PIOS_LED_D1)
#define D2_LED_ON PIOS_LED_On(PIOS_LED_D2)
#define D2_LED_OFF PIOS_LED_Off(PIOS_LED_D2)
#define D2_LED_TOGGLE PIOS_LED_Toggle(PIOS_LED_D2)
#define D3_LED_ON PIOS_LED_On(PIOS_LED_D3)
#define D3_LED_OFF PIOS_LED_Off(PIOS_LED_D3)
#define D3_LED_TOGGLE PIOS_LED_Toggle(PIOS_LED_D3)
#define D4_LED_ON PIOS_LED_On(PIOS_LED_D4)
#define D4_LED_OFF PIOS_LED_Off(PIOS_LED_D4)
#define D4_LED_TOGGLE PIOS_LED_Toggle(PIOS_LED_D4)
#endif /* PIOS_RFM22B_DEBUG_ON_TELEM */
// ------------------------
// PIOS_SPI
// See also pios_board.c
// ------------------------
#define PIOS_SPI_MAX_DEVS 3
// ------------------------
// PIOS_WDG
// ------------------------
#define PIOS_WATCHDOG_TIMEOUT 250
#define PIOS_WDG_REGISTER RTC_BKP_DR4
#define PIOS_WDG_ACTUATOR 0x0001
#define PIOS_WDG_STABILIZATION 0x0002
#define PIOS_WDG_ATTITUDE 0x0004
#define PIOS_WDG_MANUAL 0x0008
#define PIOS_WDG_SENSORS 0x0010
// ------------------------
// PIOS_I2C
// See also pios_board.c
// ------------------------
#define PIOS_I2C_MAX_DEVS 3
extern uint32_t pios_i2c_mag_pressure_adapter_id;
#define PIOS_I2C_MAIN_ADAPTER (pios_i2c_mag_pressure_adapter_id)
extern uint32_t pios_i2c_flexiport_adapter_id;
#define PIOS_I2C_FLEXI_ADAPTER (pios_i2c_flexiport_adapter_id)
#define PIOS_I2C_ETASV3_ADAPTER (PIOS_I2C_FLEXI_ADAPTER)
#define PIOS_I2C_MS4525DO_ADAPTER (PIOS_I2C_FLEXI_ADAPTER)
// -------------------------
// PIOS_USART
//
// See also pios_board.c
// -------------------------
#define PIOS_USART_MAX_DEVS 5
// -------------------------
// PIOS_COM
//
// See also pios_board.c
// -------------------------
#define PIOS_COM_MAX_DEVS 4
extern uint32_t pios_com_telem_rf_id;
extern uint32_t pios_com_rf_id;
extern uint32_t pios_com_gps_id;
extern uint32_t pios_com_telem_usb_id;
extern uint32_t pios_com_bridge_id;
extern uint32_t pios_com_vcp_id;
extern uint32_t pios_com_hkosd_id;
#define PIOS_COM_GPS (pios_com_gps_id)
#define PIOS_COM_TELEM_USB (pios_com_telem_usb_id)
#define PIOS_COM_TELEM_RF (pios_com_telem_rf_id)
#define PIOS_COM_RF (pios_com_rf_id)
#define PIOS_COM_BRIDGE (pios_com_bridge_id)
#define PIOS_COM_VCP (pios_com_vcp_id)
#define PIOS_COM_OSDHK (pios_com_hkosd_id)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
extern uint32_t pios_com_debug_id;
#define PIOS_COM_DEBUG (pios_com_debug_id)
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#if defined(PIOS_INCLUDE_RFM22B)
extern uint32_t pios_rfm22b_id;
extern uint32_t pios_spi_telem_flash_id;
#define PIOS_RFM22_SPI_PORT (pios_spi_telem_flash_id)
#endif /* PIOS_INCLUDE_RFM22B */
// -------------------------
// Packet Handler
// -------------------------
#define RS_ECC_NPARITY 4
#define PIOS_PH_MAX_PACKET 255
#define PIOS_PH_WIN_SIZE 3
#define PIOS_PH_MAX_CONNECTIONS 1
extern uint32_t pios_packet_handler;
#define PIOS_PACKET_HANDLER (pios_packet_handler)
// ------------------------
// TELEMETRY
// ------------------------
#define TELEM_QUEUE_SIZE 80
#define PIOS_TELEM_STACK_SIZE 800
// -------------------------
// System Settings
//
// See also System_stm32f4xx.c
// -------------------------
// These macros are deprecated
// please use PIOS_PERIPHERAL_APBx_CLOCK According to the table below
// #define PIOS_MASTER_CLOCK
// #define PIOS_PERIPHERAL_CLOCK
// #define PIOS_PERIPHERAL_CLOCK
#define PIOS_SYSCLK 168000000
// Peripherals that belongs to APB1 are:
// DAC |PWR |CAN1,2
// I2C1,2,3 |UART4,5 |USART3,2
// I2S3Ext |SPI3/I2S3 |SPI2/I2S2
// I2S2Ext |IWDG |WWDG
// RTC/BKP reg
// TIM2,3,4,5,6,7,12,13,14
// Calculated as SYSCLK / APBPresc * (APBPre == 1 ? 1 : 2)
// Default APB1 Prescaler = 4
#define PIOS_PERIPHERAL_APB1_CLOCK (PIOS_SYSCLK / 2)
// Peripherals belonging to APB2
// SDIO |EXTI |SYSCFG |SPI1
// ADC1,2,3
// USART1,6
// TIM1,8,9,10,11
//
// Default APB2 Prescaler = 2
//
#define PIOS_PERIPHERAL_APB2_CLOCK PIOS_SYSCLK
// -------------------------
// Interrupt Priorities
// -------------------------
#define PIOS_IRQ_PRIO_LOW 12 // lower than RTOS
#define PIOS_IRQ_PRIO_MID 8 // higher than RTOS
#define PIOS_IRQ_PRIO_HIGH 5 // for SPI, ADC, I2C etc...
#define PIOS_IRQ_PRIO_HIGHEST 4 // for USART etc...
// ------------------------
// PIOS_RCVR
// See also pios_board.c
// ------------------------
#define PIOS_RCVR_MAX_DEVS 3
#define PIOS_RCVR_MAX_CHANNELS 12
#define PIOS_GCSRCVR_TIMEOUT_MS 100
#define PIOS_RFM22B_RCVR_TIMEOUT_MS 200
#define PIOS_OPLINK_RCVR_TIMEOUT_MS 100
// -------------------------
// Receiver PPM input
// -------------------------
#define PIOS_PPM_MAX_DEVS 1
#define PIOS_PPM_NUM_INPUTS 12
// -------------------------
// Receiver PWM input
// -------------------------
#define PIOS_PWM_MAX_DEVS 1
#define PIOS_PWM_NUM_INPUTS 8
// -------------------------
// Receiver SPEKTRUM input
// -------------------------
#define PIOS_SPEKTRUM_MAX_DEVS 2
#define PIOS_SPEKTRUM_NUM_INPUTS 12
// -------------------------
// Receiver S.Bus input
// -------------------------
#define PIOS_SBUS_MAX_DEVS 1
#define PIOS_SBUS_NUM_INPUTS (16 + 2)
// -------------------------
// Receiver Multiplex SRXL input
// -------------------------
#define PIOS_SRXL_MAX_DEVS 1
#define PIOS_SRXL_NUM_INPUTS 16
// -------------------------
// Receiver DSM input
// -------------------------
#define PIOS_DSM_MAX_DEVS 2
#define PIOS_DSM_NUM_INPUTS 12
// -------------------------
// Servo outputs
// -------------------------
#define PIOS_SERVO_UPDATE_HZ 50
#define PIOS_SERVOS_INITIAL_POSITION 0 /* dont want to start motors, have no pulse till settings loaded */
#define PIOS_SERVO_BANKS 6
// --------------------------
// Timer controller settings
// --------------------------
#define PIOS_TIM_MAX_DEVS 6
// -------------------------
// ADC
// PIOS_ADC_PinGet(0) = Current sensor
// PIOS_ADC_PinGet(1) = Voltage sensor
// PIOS_ADC_PinGet(4) = VREF
// PIOS_ADC_PinGet(5) = Temperature sensor
// -------------------------
#define PIOS_DMA_PIN_CONFIG \
{ \
{ GPIOC, GPIO_Pin_1, ADC_Channel_11, false }, /* batt/sonar pin 3 */ \
{ GPIOC, GPIO_Pin_2, ADC_Channel_12, false }, /* batt/sonar pin 4 */ \
{ GPIOA, GPIO_Pin_3, ADC_Channel_3, false }, /* Servo pin 3 */ \
{ GPIOA, GPIO_Pin_2, ADC_Channel_2, false }, /* Servo pin 4 */ \
{ GPIOA, GPIO_Pin_1, ADC_Channel_1, false }, /* Servo pin 5 */ \
{ GPIOA, GPIO_Pin_0, ADC_Channel_9, false }, /* Servo pin 6 */ \
{ NULL, 0, ADC_Channel_Vrefint, false }, /* Voltage reference */ \
{ NULL, 0, ADC_Channel_TempSensor, false }, /* Temperature sensor */ \
}
/* we have to do all this to satisfy the PIOS_ADC_MAX_SAMPLES define in pios_adc.h */
/* which is annoying because this then determines the rate at which we generate buffer turnover events */
/* the objective here is to get enough buffer space to support 100Hz averaging rate */
#define PIOS_ADC_NUM_CHANNELS 8
#define PIOS_ADC_MAX_OVERSAMPLING 2
#define PIOS_ADC_USE_ADC2 0
#define PIOS_ADC_USE_TEMP_SENSOR
#define PIOS_ADC_TEMPERATURE_PIN 7
// -------------------------
// USB
// -------------------------
#define PIOS_USB_MAX_DEVS 1
#define PIOS_USB_ENABLED 1 /* Should remove all references to this */
#define PIOS_USB_HID_MAX_DEVS 1
#endif /* PIOS_BOARD_H */
/**
* @}
* @}
*/