mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-14 21:23:52 +01:00
e22bc0c51b
These files do not contain content from the ID in the header. This name seems to have been cut/pasted all over throughout the openpilot source tree and should be removed from any files that should not rightfully be attributed to this person.
524 lines
16 KiB
C
524 lines
16 KiB
C
/**
|
|
******************************************************************************
|
|
* @addtogroup PIOS PIOS Core hardware abstraction layer
|
|
* @{
|
|
* @addtogroup PIOS_SPI SPI Functions
|
|
* @brief PIOS interface to read and write from SPI ports
|
|
* @{
|
|
*
|
|
* @file pios_spi.c
|
|
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
|
|
* @brief Hardware Abstraction Layer for SPI ports of STM32
|
|
* @see The GNU Public License (GPL) Version 3
|
|
* @notes
|
|
*
|
|
* Note that additional chip select lines can be easily added by using
|
|
* the remaining free GPIOs of the core module. Shared SPI ports should be
|
|
* arbitrated with (FreeRTOS based) Mutexes to avoid collisions!
|
|
*
|
|
*****************************************************************************/
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <pios.h>
|
|
|
|
#if defined(PIOS_INCLUDE_SPI)
|
|
|
|
#include <pios_spi_priv.h>
|
|
|
|
static bool PIOS_SPI_validate(struct pios_spi_dev * com_dev)
|
|
{
|
|
/* Should check device magic here */
|
|
return(true);
|
|
}
|
|
|
|
#if defined(PIOS_INCLUDE_FREERTOS)
|
|
static struct pios_spi_dev * PIOS_SPI_alloc(void)
|
|
{
|
|
return (pvPortMalloc(sizeof(struct pios_spi_dev)));
|
|
}
|
|
#else
|
|
static struct pios_spi_dev pios_spi_devs[PIOS_SPI_MAX_DEVS];
|
|
static uint8_t pios_spi_num_devs;
|
|
static struct pios_spi_dev * PIOS_SPI_alloc(void)
|
|
{
|
|
if (pios_spi_num_devs >= PIOS_SPI_MAX_DEVS) {
|
|
return (NULL);
|
|
}
|
|
|
|
return (&pios_spi_devs[pios_spi_num_devs++]);
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* Initialises SPI pins
|
|
* \param[in] mode currently only mode 0 supported
|
|
* \return < 0 if initialisation failed
|
|
*/
|
|
int32_t PIOS_SPI_Init(uint32_t * spi_id, const struct pios_spi_cfg * cfg)
|
|
{
|
|
PIOS_Assert(spi_id);
|
|
PIOS_Assert(cfg);
|
|
|
|
struct pios_spi_dev * spi_dev;
|
|
|
|
spi_dev = (struct pios_spi_dev *) PIOS_SPI_alloc();
|
|
if (!spi_dev) goto out_fail;
|
|
|
|
/* Bind the configuration to the device instance */
|
|
spi_dev->cfg = cfg;
|
|
|
|
#if defined(PIOS_INCLUDE_FREERTOS)
|
|
vSemaphoreCreateBinary(spi_dev->busy);
|
|
xSemaphoreGive(spi_dev->busy);
|
|
#endif
|
|
|
|
/* Disable callback function */
|
|
spi_dev->callback = NULL;
|
|
|
|
/* Set rx/tx dummy bytes to a known value */
|
|
spi_dev->rx_dummy_byte = 0xFF;
|
|
spi_dev->tx_dummy_byte = 0xFF;
|
|
|
|
switch (spi_dev->cfg->init.SPI_NSS) {
|
|
case SPI_NSS_Soft:
|
|
if (spi_dev->cfg->init.SPI_Mode == SPI_Mode_Master) {
|
|
/* We're a master in soft NSS mode, make sure we see NSS high at all times. */
|
|
SPI_NSSInternalSoftwareConfig(spi_dev->cfg->regs, SPI_NSSInternalSoft_Set);
|
|
/* Since we're driving the SSEL pin in software, ensure that the slave is deselected */
|
|
GPIO_SetBits(spi_dev->cfg->ssel.gpio, spi_dev->cfg->ssel.init.GPIO_Pin);
|
|
GPIO_Init(spi_dev->cfg->ssel.gpio, &(spi_dev->cfg->ssel.init));
|
|
} else {
|
|
/* We're a slave in soft NSS mode, make sure we see NSS low at all times. */
|
|
SPI_NSSInternalSoftwareConfig(spi_dev->cfg->regs, SPI_NSSInternalSoft_Reset);
|
|
}
|
|
break;
|
|
case SPI_NSS_Hard:
|
|
/* FIXME: Should this also call SPI_SSOutputCmd()? */
|
|
GPIO_Init(spi_dev->cfg->ssel.gpio, &(spi_dev->cfg->ssel.init));
|
|
break;
|
|
default:
|
|
PIOS_Assert(0);
|
|
}
|
|
|
|
/* Initialize the GPIO pins */
|
|
GPIO_Init(spi_dev->cfg->sclk.gpio, &(spi_dev->cfg->sclk.init));
|
|
GPIO_Init(spi_dev->cfg->mosi.gpio, &(spi_dev->cfg->mosi.init));
|
|
GPIO_Init(spi_dev->cfg->miso.gpio, &(spi_dev->cfg->miso.init));
|
|
|
|
/* Enable the associated peripheral clock */
|
|
switch ((uint32_t) spi_dev->cfg->regs) {
|
|
case (uint32_t) SPI1:
|
|
/* Enable SPI peripheral clock (APB2 == high speed) */
|
|
RCC_APB2PeriphClockCmd(RCC_APB2Periph_SPI1, ENABLE);
|
|
break;
|
|
case (uint32_t) SPI2:
|
|
/* Enable SPI peripheral clock (APB1 == slow speed) */
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE);
|
|
break;
|
|
case (uint32_t) SPI3:
|
|
/* Enable SPI peripheral clock (APB1 == slow speed) */
|
|
RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI3, ENABLE);
|
|
break;
|
|
}
|
|
|
|
/* Enable DMA clock */
|
|
RCC_AHBPeriphClockCmd(spi_dev->cfg->dma.ahb_clk, ENABLE);
|
|
|
|
/* Configure DMA for SPI Rx */
|
|
DMA_Cmd(spi_dev->cfg->dma.rx.channel, DISABLE);
|
|
DMA_Init(spi_dev->cfg->dma.rx.channel, &(spi_dev->cfg->dma.rx.init));
|
|
|
|
/* Configure DMA for SPI Tx */
|
|
DMA_Cmd(spi_dev->cfg->dma.tx.channel, DISABLE);
|
|
DMA_Init(spi_dev->cfg->dma.tx.channel, &(spi_dev->cfg->dma.tx.init));
|
|
|
|
/* Initialize the SPI block */
|
|
SPI_Init(spi_dev->cfg->regs, &(spi_dev->cfg->init));
|
|
|
|
/* Configure CRC calculation */
|
|
if (spi_dev->cfg->use_crc) {
|
|
SPI_CalculateCRC(spi_dev->cfg->regs, ENABLE);
|
|
} else {
|
|
SPI_CalculateCRC(spi_dev->cfg->regs, DISABLE);
|
|
}
|
|
|
|
/* Enable SPI */
|
|
SPI_Cmd(spi_dev->cfg->regs, ENABLE);
|
|
|
|
/* Enable SPI interrupts to DMA */
|
|
SPI_I2S_DMACmd(spi_dev->cfg->regs, SPI_I2S_DMAReq_Tx | SPI_I2S_DMAReq_Rx, ENABLE);
|
|
|
|
/* Configure DMA interrupt */
|
|
NVIC_Init(&(spi_dev->cfg->dma.irq.init));
|
|
|
|
*spi_id = (uint32_t)spi_dev;
|
|
return(0);
|
|
|
|
out_fail:
|
|
return(-1);
|
|
}
|
|
|
|
/**
|
|
* (Re-)initialises SPI peripheral clock rate
|
|
*
|
|
* \param[in] spi SPI number (0 or 1)
|
|
* \param[in] spi_prescaler configures the SPI speed:
|
|
* <UL>
|
|
* <LI>PIOS_SPI_PRESCALER_2: sets clock rate 27.7~ nS @ 72 MHz (36 MBit/s) (only supported for spi==0, spi1 uses 4 instead)
|
|
* <LI>PIOS_SPI_PRESCALER_4: sets clock rate 55.5~ nS @ 72 MHz (18 MBit/s)
|
|
* <LI>PIOS_SPI_PRESCALER_8: sets clock rate 111.1~ nS @ 72 MHz (9 MBit/s)
|
|
* <LI>PIOS_SPI_PRESCALER_16: sets clock rate 222.2~ nS @ 72 MHz (4.5 MBit/s)
|
|
* <LI>PIOS_SPI_PRESCALER_32: sets clock rate 444.4~ nS @ 72 MHz (2.25 MBit/s)
|
|
* <LI>PIOS_SPI_PRESCALER_64: sets clock rate 888.8~ nS @ 72 MHz (1.125 MBit/s)
|
|
* <LI>PIOS_SPI_PRESCALER_128: sets clock rate 1.7~ nS @ 72 MHz (0.562 MBit/s)
|
|
* <LI>PIOS_SPI_PRESCALER_256: sets clock rate 3.5~ nS @ 72 MHz (0.281 MBit/s)
|
|
* </UL>
|
|
* \return 0 if no error
|
|
* \return -1 if disabled SPI port selected
|
|
* \return -3 if invalid spi_prescaler selected
|
|
*/
|
|
int32_t PIOS_SPI_SetClockSpeed(uint32_t spi_id, SPIPrescalerTypeDef spi_prescaler)
|
|
{
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
SPI_InitTypeDef SPI_InitStructure;
|
|
|
|
if (spi_prescaler >= 8) {
|
|
/* Invalid prescaler selected */
|
|
return -3;
|
|
}
|
|
|
|
/* Start with a copy of the default configuration for the peripheral */
|
|
SPI_InitStructure = spi_dev->cfg->init;
|
|
|
|
/* Adjust the prescaler for the peripheral's clock */
|
|
SPI_InitStructure.SPI_BaudRatePrescaler = ((uint16_t) spi_prescaler & 7) << 3;
|
|
|
|
/* Write back the new configuration */
|
|
SPI_Init(spi_dev->cfg->regs, &SPI_InitStructure);
|
|
|
|
PIOS_SPI_TransferByte(spi_id, 0xFF);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Claim the SPI bus semaphore. Calling the SPI functions does not require this
|
|
* \param[in] spi SPI number (0 or 1)
|
|
* \return 0 if no error
|
|
* \return -1 if timeout before claiming semaphore
|
|
*/
|
|
int32_t PIOS_SPI_ClaimBus(uint32_t spi_id)
|
|
{
|
|
#if defined(PIOS_INCLUDE_FREERTOS)
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
if (xSemaphoreTake(spi_dev->busy, 0xffff) != pdTRUE)
|
|
return -1;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Release the SPI bus semaphore. Calling the SPI functions does not require this
|
|
* \param[in] spi SPI number (0 or 1)
|
|
* \return 0 if no error
|
|
*/
|
|
int32_t PIOS_SPI_ReleaseBus(uint32_t spi_id)
|
|
{
|
|
#if defined(PIOS_INCLUDE_FREERTOS)
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
xSemaphoreGive(spi_dev->busy);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Controls the RC (Register Clock alias Chip Select) pin of a SPI port
|
|
* \param[in] spi SPI number (0 or 1)
|
|
* \param[in] pin_value 0 or 1
|
|
* \return 0 if no error
|
|
*/
|
|
int32_t PIOS_SPI_RC_PinSet(uint32_t spi_id, uint8_t pin_value)
|
|
{
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
if (pin_value) {
|
|
GPIO_SetBits(spi_dev->cfg->ssel.gpio, spi_dev->cfg->ssel.init.GPIO_Pin);
|
|
} else {
|
|
GPIO_ResetBits(spi_dev->cfg->ssel.gpio, spi_dev->cfg->ssel.init.GPIO_Pin);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Transfers a byte to SPI output and reads back the return value from SPI input
|
|
* \param[in] spi SPI number (0 or 1)
|
|
* \param[in] b the byte which should be transfered
|
|
*/
|
|
int32_t PIOS_SPI_TransferByte(uint32_t spi_id, uint8_t b)
|
|
{
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
uint8_t dummy;
|
|
uint8_t rx_byte;
|
|
|
|
/*
|
|
* Procedure taken from STM32F10xxx Reference Manual section 23.3.5
|
|
*/
|
|
|
|
/* Make sure the RXNE flag is cleared by reading the DR register */
|
|
dummy = spi_dev->cfg->regs->DR;
|
|
|
|
/* Start the transfer */
|
|
spi_dev->cfg->regs->DR = b;
|
|
|
|
/* Wait until there is a byte to read */
|
|
while (!(spi_dev->cfg->regs->SR & SPI_I2S_FLAG_RXNE)) ;
|
|
|
|
/* Read the rx'd byte */
|
|
rx_byte = spi_dev->cfg->regs->DR;
|
|
|
|
/* Wait until the TXE goes high */
|
|
while (!(spi_dev->cfg->regs->SR & SPI_I2S_FLAG_TXE)) ;
|
|
|
|
/* Wait for SPI transfer to have fully completed */
|
|
while (spi_dev->cfg->regs->SR & SPI_I2S_FLAG_BSY) ;
|
|
|
|
/* Return received byte */
|
|
return rx_byte;
|
|
}
|
|
|
|
/**
|
|
* Transfers a block of bytes via DMA.
|
|
* \param[in] spi SPI number (0 or 1)
|
|
* \param[in] send_buffer pointer to buffer which should be sent.<BR>
|
|
* If NULL, 0xff (all-one) will be sent.
|
|
* \param[in] receive_buffer pointer to buffer which should get the received values.<BR>
|
|
* If NULL, received bytes will be discarded.
|
|
* \param[in] len number of bytes which should be transfered
|
|
* \param[in] callback pointer to callback function which will be executed
|
|
* from DMA channel interrupt once the transfer is finished.
|
|
* If NULL, no callback function will be used, and PIOS_SPI_TransferBlock() will
|
|
* block until the transfer is finished.
|
|
* \return >= 0 if no error during transfer
|
|
* \return -1 if disabled SPI port selected
|
|
* \return -3 if function has been called during an ongoing DMA transfer
|
|
*/
|
|
int32_t PIOS_SPI_TransferBlock(uint32_t spi_id, const uint8_t *send_buffer, uint8_t *receive_buffer, uint16_t len, void *callback)
|
|
{
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
DMA_InitTypeDef dma_init;
|
|
|
|
/* Exit if ongoing transfer */
|
|
if (DMA_GetCurrDataCounter(spi_dev->cfg->dma.rx.channel)) {
|
|
return -3;
|
|
}
|
|
|
|
/* Disable the SPI peripheral */
|
|
SPI_Cmd(spi_dev->cfg->regs, DISABLE);
|
|
|
|
/* Disable the DMA channels */
|
|
DMA_Cmd(spi_dev->cfg->dma.rx.channel, DISABLE);
|
|
DMA_Cmd(spi_dev->cfg->dma.tx.channel, DISABLE);
|
|
|
|
/* Set callback function */
|
|
spi_dev->callback = callback;
|
|
|
|
/*
|
|
* Configure Rx channel
|
|
*/
|
|
|
|
/* Start with the default configuration for this peripheral */
|
|
dma_init = spi_dev->cfg->dma.rx.init;
|
|
|
|
if (receive_buffer != NULL) {
|
|
/* Enable memory addr. increment - bytes written into receive buffer */
|
|
dma_init.DMA_MemoryBaseAddr = (uint32_t) receive_buffer;
|
|
dma_init.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|
} else {
|
|
/* Disable memory addr. increment - bytes written into dummy buffer */
|
|
spi_dev->rx_dummy_byte = 0xFF;
|
|
dma_init.DMA_MemoryBaseAddr = (uint32_t) &spi_dev->rx_dummy_byte;
|
|
dma_init.DMA_MemoryInc = DMA_MemoryInc_Disable;
|
|
}
|
|
if (spi_dev->cfg->use_crc) {
|
|
/* Make sure the CRC error flag is cleared before we start */
|
|
SPI_I2S_ClearFlag(spi_dev->cfg->regs, SPI_FLAG_CRCERR);
|
|
}
|
|
|
|
dma_init.DMA_BufferSize = len;
|
|
DMA_Init(spi_dev->cfg->dma.rx.channel, &(dma_init));
|
|
|
|
/*
|
|
* Configure Tx channel
|
|
*/
|
|
|
|
/* Start with the default configuration for this peripheral */
|
|
dma_init = spi_dev->cfg->dma.tx.init;
|
|
|
|
if (send_buffer != NULL) {
|
|
/* Enable memory addr. increment - bytes written into receive buffer */
|
|
dma_init.DMA_MemoryBaseAddr = (uint32_t) send_buffer;
|
|
dma_init.DMA_MemoryInc = DMA_MemoryInc_Enable;
|
|
} else {
|
|
/* Disable memory addr. increment - bytes written into dummy buffer */
|
|
spi_dev->tx_dummy_byte = 0xFF;
|
|
dma_init.DMA_MemoryBaseAddr = (uint32_t) &spi_dev->tx_dummy_byte;
|
|
dma_init.DMA_MemoryInc = DMA_MemoryInc_Disable;
|
|
}
|
|
|
|
if (spi_dev->cfg->use_crc) {
|
|
/* The last byte of the payload will be replaced with the CRC8 */
|
|
dma_init.DMA_BufferSize = len - 1;
|
|
} else {
|
|
dma_init.DMA_BufferSize = len;
|
|
}
|
|
|
|
DMA_Init(spi_dev->cfg->dma.tx.channel, &(dma_init));
|
|
|
|
/* Enable DMA interrupt if callback function active */
|
|
DMA_ITConfig(spi_dev->cfg->dma.rx.channel, DMA_IT_TC, (callback != NULL) ? ENABLE : DISABLE);
|
|
|
|
/* Flush out the CRC registers */
|
|
SPI_CalculateCRC(spi_dev->cfg->regs, DISABLE);
|
|
(void)SPI_GetCRC(spi_dev->cfg->regs, SPI_CRC_Rx);
|
|
SPI_I2S_ClearFlag(spi_dev->cfg->regs, SPI_FLAG_CRCERR);
|
|
|
|
/* Make sure to flush out the receive buffer */
|
|
(void)SPI_I2S_ReceiveData(spi_dev->cfg->regs);
|
|
|
|
if (spi_dev->cfg->use_crc) {
|
|
/* Need a 0->1 transition to reset the CRC logic */
|
|
SPI_CalculateCRC(spi_dev->cfg->regs, ENABLE);
|
|
}
|
|
|
|
/* Start DMA transfers */
|
|
DMA_Cmd(spi_dev->cfg->dma.rx.channel, ENABLE);
|
|
DMA_Cmd(spi_dev->cfg->dma.tx.channel, ENABLE);
|
|
|
|
/* Reenable the SPI device */
|
|
SPI_Cmd(spi_dev->cfg->regs, ENABLE);
|
|
|
|
if (callback) {
|
|
/* User has requested a callback, don't wait for the transfer to complete. */
|
|
return 0;
|
|
}
|
|
|
|
/* Wait until all bytes have been transmitted/received */
|
|
while (DMA_GetCurrDataCounter(spi_dev->cfg->dma.rx.channel));
|
|
|
|
/* Wait for the final bytes of the transfer to complete, including CRC byte(s). */
|
|
while (!(SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_I2S_FLAG_TXE)));
|
|
|
|
/* Wait for the final bytes of the transfer to complete, including CRC byte(s). */
|
|
while (SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_I2S_FLAG_BSY));
|
|
|
|
/* Check the CRC on the transfer if enabled. */
|
|
if (spi_dev->cfg->use_crc) {
|
|
/* Check the SPI CRC error flag */
|
|
if (SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_FLAG_CRCERR)) {
|
|
return -4;
|
|
}
|
|
}
|
|
|
|
/* No error */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Check if a transfer is in progress
|
|
* \param[in] spi SPI number (0 or 1)
|
|
* \return >= 0 if no transfer is in progress
|
|
* \return -1 if disabled SPI port selected
|
|
* \return -2 if unsupported SPI port selected
|
|
* \return -3 if function has been called during an ongoing DMA transfer
|
|
*/
|
|
int32_t PIOS_SPI_Busy(uint32_t spi_id)
|
|
{
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
/* DMA buffer has data or SPI transmit register not empty or SPI is busy*/
|
|
if (DMA_GetCurrDataCounter(spi_dev->cfg->dma.rx.channel) ||
|
|
!SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_I2S_FLAG_TXE) ||
|
|
SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_I2S_FLAG_BSY))
|
|
{
|
|
return -3;
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
void PIOS_SPI_IRQ_Handler(uint32_t spi_id)
|
|
{
|
|
struct pios_spi_dev * spi_dev = (struct pios_spi_dev *)spi_id;
|
|
|
|
bool valid = PIOS_SPI_validate(spi_dev);
|
|
PIOS_Assert(valid)
|
|
|
|
DMA_ClearFlag(spi_dev->cfg->dma.irq.flags);
|
|
|
|
/* Wait for the final bytes of the transfer to complete, including CRC byte(s). */
|
|
while (!(SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_I2S_FLAG_TXE))) ;
|
|
|
|
/* Wait for the final bytes of the transfer to complete, including CRC byte(s). */
|
|
while (SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_I2S_FLAG_BSY)) ;
|
|
|
|
if (spi_dev->callback != NULL) {
|
|
bool crc_ok = TRUE;
|
|
uint8_t crc_val;
|
|
|
|
if (SPI_I2S_GetFlagStatus(spi_dev->cfg->regs, SPI_FLAG_CRCERR)) {
|
|
crc_ok = FALSE;
|
|
SPI_I2S_ClearFlag(spi_dev->cfg->regs, SPI_FLAG_CRCERR);
|
|
}
|
|
crc_val = SPI_GetCRC(spi_dev->cfg->regs, SPI_CRC_Rx);
|
|
spi_dev->callback(crc_ok, crc_val);
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @}
|
|
*/
|