1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
LibrePilot/flight/OpenPilot/Makefile.posix
vassilis b084ea7ea1 FlightPlan/Python: Updated object generator to create a Python file for each UAVObject. It is now possible to access all UAVObjects from the FlightPlan Python scripts.
Warning: The memory utilization when importing objects is unacceptably high making it unusable in the flight code at this point. It can be however used with the SITL simulator. Some more investigation is needed to understand why several kb of memory are used each time a module is imported (even before any functions are called or objects from the module are created). 


git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2938 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 02:22:50 +00:00

647 lines
20 KiB
Makefile

#####
# Project: OpenPilot
#
#
# Makefile for OpenPilot project build PiOS and the AP.
#
# The OpenPilot Team, http://www.openpilot.org, Copyright (C) 2009.
#
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#####
# Set developer code and compile options
# Set to YES to compile for debugging
DEBUG ?= YES
# Set to YES to use the Servo output pins for debugging via scope or logic analyser
ENABLE_DEBUG_PINS ?= NO
# Set to Yes to enable the AUX UART which is mapped on the S1 (Tx) and S2 (Rx) servo outputs
ENABLE_AUX_UART ?= NO
#
USE_BOOTLOADER ?= NO
# Set to YES when using Code Sourcery toolchain
CODE_SOURCERY ?= NO
# Toolchain prefix (i.e arm-elf- -> arm-elf-gcc.exe)
TCHAIN_PREFIX ?= ""
# Remove command is different for Code Sourcery on Windows
REMOVE_CMD ?= rm
FLASH_TOOL = OPENOCD
# YES enables -mthumb option to flags for source-files listed
# in SRC and CPPSRC
USE_THUMB_MODE = YES
# List of modules to include
MODULES = Telemetry Actuator Stabilization Guidance ManualControl FlightPlan
#MODULES = Telemetry ManualControl Actuator Attitude Stabilization
#MODULES = Telemetry Example
#MODULES = Telemetry MK/MKSerial
#MODULES += Osd/OsdEtStd
# MCU name, submodel and board
# - MCU used for compiler-option (-mtune)
# - MODEL used for linker-script name (-T) and passed as define
# - BOARD just passed as define (optional)
MCU = i686
#CHIP = STM32F103RET
#BOARD = STM3210E_OP
MODEL = HD
ifeq ($(USE_BOOTLOADER), YES)
BOOT_MODEL = $(MODEL)_BL
else
BOOT_MODEL = $(MODEL)_NB
endif
# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.)
OUTDIR = ../../build/sitl_posix
# Target file name (without extension).
TARGET = OpenPilot
# Paths
OPSYSTEM = ./System
OPSYSTEMINC = $(OPSYSTEM)/inc
OPUAVTALK = ../UAVTalk
OPUAVTALKINC = $(OPUAVTALK)/inc
OPUAVOBJ = ../UAVObjects
OPUAVOBJINC = $(OPUAVOBJ)/inc
OPTESTS = ./Tests
OPMODULEDIR = ../Modules
FLIGHTLIB = ../Libraries
FLIGHTLIBINC = $(FLIGHTLIB)/inc
PIOS = ../PiOS.posix
PIOSINC = $(PIOS)/inc
PIOSPOSIX = $(PIOS)/posix
APPLIBDIR = $(PIOSPOSIX)/Libraries
RTOSDIR = $(APPLIBDIR)/FreeRTOS
RTOSSRCDIR = $(RTOSDIR)/Source
RTOSINCDIR = $(RTOSSRCDIR)/include
DOXYGENDIR = ../Doc/Doxygen
AHRSBOOTLOADER = ../Bootloaders/AHRS/
AHRSBOOTLOADERINC = $(AHRSBOOTLOADER)/inc
PYMITE = $(FLIGHTLIB)/PyMite
PYMITELIB = $(PYMITE)/lib
PYMITEPLAT = $(PYMITE)/platform/openpilot_sitl
PYMITETOOLS = $(PYMITE)/tools
PYMITEVM = $(PYMITE)/vm
PYMITEINC = $(PYMITEVM)
PYMITEINC += $(PYMITEPLAT)
PYMITEINC += $(OUTDIR)
FLIGHTPLANLIB = $(OPMODULEDIR)/FlightPlan/lib
FLIGHTPLANS = $(OPMODULEDIR)/FlightPlan/flightplans
UAVOBJSYNTHDIR = $(OUTDIR)/../uavobject-synthetics/flight
UAVOBJPYTHONSYNTHDIR = $(OUTDIR)/../uavobject-synthetics/python
# List C source files here. (C dependencies are automatically generated.)
# use file-extension c for "c-only"-files
MODNAMES = $(notdir ${MODULES})
ifndef TESTAPP
## PyMite files
SRC += $(OUTDIR)/pmlib_img.c
SRC += $(OUTDIR)/pmlib_nat.c
SRC += $(OUTDIR)/pmlibusr_img.c
SRC += $(OUTDIR)/pmlibusr_nat.c
SRC += $(wildcard ${PYMITEVM}/*.c)
SRC += $(wildcard ${PYMITEPLAT}/*.c)
## MODULES
SRC += ${foreach MOD, ${MODULES}, ${wildcard ${OPMODULEDIR}/${MOD}/*.c}}
SRC += ${OUTDIR}/InitMods.c
## OPENPILOT CORE:
SRC += ${OPMODULEDIR}/System/systemmod.c
SRC += $(OPSYSTEM)/openpilot.c
SRC += $(OPSYSTEM)/pios_board_posix.c
SRC += $(OPSYSTEM)/alarms.c
SRC += $(OPSYSTEM)/taskmonitor.c
SRC += $(OPUAVTALK)/uavtalk.c
SRC += $(OPUAVOBJ)/uavobjectmanager.c
SRC += $(OPUAVOBJ)/eventdispatcher.c
SRC += $(UAVOBJSYNTHDIR)/uavobjectsinit.c
else
## TESTCODE
SRC += $(OPTESTS)/test_common.c
SRC += $(OPTESTS)/$(TESTAPP).c
endif
## UAVOBJECTS
ifndef TESTAPP
#include $(UAVOBJSYNTHDIR)/Makefile.inc
include ./UAVObjects.inc
SRC += $(UAVOBJSRC)
CFLAGS_UAVOBJECTS = $(UAVOBJDEFINE)
endif
## PIOS Hardware (posix)
SRC += $(PIOSPOSIX)/pios_sys.c
SRC += $(PIOSPOSIX)/pios_led.c
SRC += $(PIOSPOSIX)/pios_delay.c
SRC += $(PIOSPOSIX)/pios_sdcard.c
SRC += $(PIOSPOSIX)/pios_udp.c
SRC += $(PIOSPOSIX)/pios_com.c
SRC += $(PIOSPOSIX)/pios_servo.c
SRC += $(PIOSPOSIX)/pios_wdg.c
## Libraries for flight calculations
#SRC += $(FLIGHTLIB)/fifo_buffer.c
SRC += $(FLIGHTLIB)/WorldMagModel.c
SRC += $(FLIGHTLIB)/CoordinateConversions.c
## RTOS and RTOS Portable
SRC += $(RTOSSRCDIR)/list.c
SRC += $(RTOSSRCDIR)/queue.c
UNAME := $(shell uname)
ifeq ($(UNAME), Linux)
SRC += $(RTOSSRCDIR)/tasks_linux.c
SRC += $(RTOSSRCDIR)/portable/GCC/Posix/port_linux.c
else
SRC += $(RTOSSRCDIR)/tasks_posix.c
SRC += $(RTOSSRCDIR)/portable/GCC/Posix/port_posix.c
endif
SRC += $(RTOSSRCDIR)/portable/MemMang/heap_3.c
# List C source files here which must be compiled in ARM-Mode (no -mthumb).
# use file-extension c for "c-only"-files
## just for testing, timer.c could be compiled in thumb-mode too
SRCARM =
# List C++ source files here.
# use file-extension .cpp for C++-files (not .C)
CPPSRC =
# List C++ source files here which must be compiled in ARM-Mode.
# use file-extension .cpp for C++-files (not .C)
#CPPSRCARM = $(TARGET).cpp
CPPSRCARM =
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
EXTRAINCDIRS = $(OPSYSTEM)
EXTRAINCDIRS += $(OPSYSTEMINC)
EXTRAINCDIRS += $(OPUAVTALK)
EXTRAINCDIRS += $(OPUAVTALKINC)
EXTRAINCDIRS += $(OPUAVOBJ)
EXTRAINCDIRS += $(OPUAVOBJINC)
EXTRAINCDIRS += $(UAVOBJSYNTHDIR)
EXTRAINCDIRS += $(PIOS)
EXTRAINCDIRS += $(PIOSINC)
EXTRAINCDIRS += $(FLIGHTLIBINC)
EXTRAINCDIRS += $(PIOSPOSIX)
EXTRAINCDIRS += $(RTOSINCDIR)
EXTRAINCDIRS += $(APPLIBDIR)
EXTRAINCDIRS += $(RTOSSRCDIR)/portable/GCC/Posix
EXTRAINCDIRS += $(PYMITEINC)
EXTRAINCDIRS += ${foreach MOD, ${MODULES}, $(OPMODULEDIR)/${MOD}/inc} ${OPMODULEDIR}/System/inc
# List any extra directories to look for library files here.
# Also add directories where the linker should search for
# includes from linker-script to the list
# Each directory must be seperated by a space.
EXTRA_LIBDIRS =
# Extra Libraries
# Each library-name must be seperated by a space.
# i.e. to link with libxyz.a, libabc.a and libefsl.a:
# EXTRA_LIBS = xyz abc efsl
# for newlib-lpc (file: libnewlibc-lpc.a):
# EXTRA_LIBS = newlib-lpc
EXTRA_LIBS =
# Path to Linker-Scripts
LINKERSCRIPTPATH = $(PIOSSTM32F10X)
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
ifeq ($(DEBUG),YES)
OPT = 0
else
OPT = s
endif
# Output format. (can be ihex or binary or both)
# binary to create a load-image in raw-binary format i.e. for SAM-BA,
# ihex to create a load-image in Intel hex format
#LOADFORMAT = ihex
#LOADFORMAT = binary
LOADFORMAT = both
# Debugging format.
#DEBUGF = dwarf-2
# Place project-specific -D (define) and/or
# -U options for C here.
ifeq ($(ENABLE_DEBUG_PINS), YES)
CDEFS += -DPIOS_ENABLE_DEBUG_PINS
endif
ifeq ($(ENABLE_AUX_UART), YES)
CDEFS += -DPIOS_ENABLE_AUX_UART
endif
ifeq ($(USE_BOOTLOADER), YES)
CDEFS += -DUSE_BOOTLOADER
endif
# Compiler flag to set the C Standard level.
# c89 - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99 - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
#-----
# Compiler flags.
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
#
# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
ifeq ($(DEBUG),YES)
CFLAGS = -g$(DEBUGF) -DDEBUG
endif
CFLAGS += $(CFLAGS_UAVOBJECTS)
CFLAGS += -DARCH_POSIX
CFLAGS += -O$(OPT)
CFLAGS += -mtune=$(MCU)
CFLAGS += $(CDEFS)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I.
CFLAGS += -fomit-frame-pointer
ifeq ($(CODE_SOURCERY), YES)
CFLAGS += -fpromote-loop-indices
endif
CFLAGS += -Wall
CFLAGS += -Werror
# Compiler flags to generate dependency files:
CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d
# flags only for C
#CONLYFLAGS += -Wnested-externs
CONLYFLAGS += $(CSTANDARD)
# Assembler flags.
# -Wa,...: tell GCC to pass this to the assembler.
# -ahlns: create listing
ASFLAGS = -mtune=$(MCU) -I. -x assembler-with-cpp
ASFLAGS += $(ADEFS)
ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
MATH_LIB = -lm
# Linker flags.
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS += -lpthread
LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
LDFLAGS += -lc
LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
LDFLAGS += $(MATH_LIB)
LDFLAGS += -lc -lgcc
# Define programs and commands.
CC = $(TCHAIN_PREFIX)gcc
CPP = $(TCHAIN_PREFIX)g++
AR = $(TCHAIN_PREFIX)ar
OBJCOPY = $(TCHAIN_PREFIX)objcopy
OBJDUMP = $(TCHAIN_PREFIX)objdump
SIZE = $(TCHAIN_PREFIX)size
NM = $(TCHAIN_PREFIX)nm
REMOVE = $(REMOVE_CMD) -f
PYTHON = python
###SHELL = sh
###COPY = cp
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
MSG_BEGIN = ${quote}-------- begin (mode: $(RUN_MODE)) --------${quote}
MSG_END = ${quote}-------- end --------${quote}
MSG_MODINIT = ${quote}**** Generating ModInit.c${quote}
MSG_SIZE_BEFORE = ${quote}Size before:${quote}
MSG_SIZE_AFTER = ${quote}Size after build:${quote}
MSG_LOAD_FILE = ${quote}Creating load file:${quote}
MSG_EXTENDED_LISTING = ${quote}Creating Extended Listing/Disassembly:${quote}
MSG_SYMBOL_TABLE = ${quote}Creating Symbol Table:${quote}
MSG_LINKING = ${quote}**** Linking :${quote}
MSG_COMPILING = ${quote}**** Compiling C :${quote}
MSG_COMPILING_ARM = ${quote}**** Compiling C (ARM-only):${quote}
MSG_COMPILINGCPP = ${quote}Compiling C++ :${quote}
MSG_COMPILINGCPP_ARM = ${quote}Compiling C++ (ARM-only):${quote}
MSG_ASSEMBLING = ${quote}**** Assembling:${quote}
MSG_ASSEMBLING_ARM = ${quote}****Assembling (ARM-only):${quote}
MSG_CLEANING = ${quote}Cleaning project:${quote}
MSG_FORMATERROR = ${quote}Can not handle output-format${quote}
MSG_ASMFROMC = ${quote}Creating asm-File from C-Source:${quote}
MSG_ASMFROMC_ARM = ${quote}Creating asm-File from C-Source (ARM-only):${quote}
MSG_PYMITEINIT = ${quote}**** Generating PyMite intermediate code${quote}
# List of all source files.
ALLSRC = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC)
# List of all source files without directory and file-extension.
ALLSRCBASE = $(notdir $(basename $(ALLSRC)))
# Define all object files.
ALLOBJ = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE)))
# Define all listing files (used for make clean).
LSTFILES = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE)))
# Define all depedency-files (used for make clean).
DEPFILES = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE)))
elf: $(OUTDIR)/$(TARGET).elf
lss: $(OUTDIR)/$(TARGET).lss
sym: $(OUTDIR)/$(TARGET).sym
hex: $(OUTDIR)/$(TARGET).hex
bin: $(OUTDIR)/$(TARGET).bin
# Default target.
#all: begin gccversion sizebefore build sizeafter finished end
#all: begin gencode gccversion build sizeafter finished end
all: elf
ifeq ($(LOADFORMAT),ihex)
build: elf hex lss sym
else
ifeq ($(LOADFORMAT),binary)
build: elf bin lss sym
else
ifeq ($(LOADFORMAT),both)
build: elf hex bin lss sym
else
$(error "$(MSG_FORMATERROR) $(FORMAT)")
endif
endif
endif
# Test if quotes are needed for the echo-command
result = ${shell echo "test"}
ifeq (${result}, test)
quote = '
else
quote =
endif
# Generate intermediate code
gencode: ${OUTDIR}/InitMods.c ${OUTDIR}/pmlib_img.c ${OUTDIR}/pmlib_nat.c ${OUTDIR}/pmlibusr_img.c ${OUTDIR}/pmlibusr_nat.c ${OUTDIR}/pmfeatures.h
# Generate code for module initialization
${OUTDIR}/InitMods.c: Makefile.posix
@echo ${MSG_MODINIT}
@echo ${quote}// Autogenerated file${quote} > ${OUTDIR}/InitMods.c
@echo ${quote}${foreach MOD, ${MODNAMES}, extern unsigned int ${MOD}Initialize(void);}${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}void InitModules() {${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}${foreach MOD, ${MODNAMES}, ${MOD}Initialize();}${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}}${quote} >> ${OUTDIR}/InitMods.c
# Generate code for PyMite
${OUTDIR}/pmlib_img.c ${OUTDIR}/pmlib_nat.c ${OUTDIR}/pmlibusr_img.c ${OUTDIR}/pmlibusr_nat.c ${OUTDIR}/pmfeatures.h: $(wildcard ${PYMITELIB}/*.py) $(wildcard ${PYMITEPLAT}/*.py) $(wildcard ${FLIGHTPLANLIB}/*.py) $(wildcard ${FLIGHTPLANS}/*.py) $(wildcard $(UAVOBJPYTHONSYNTHDIR)/*.py)
@echo ${MSG_PYMITEINIT}
@$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -s --memspace=flash -o $(OUTDIR)/pmlib_img.c --native-file=$(OUTDIR)/pmlib_nat.c $(PYMITELIB)/list.py $(PYMITELIB)/dict.py $(PYMITELIB)/__bi.py $(PYMITELIB)/sys.py $(PYMITELIB)/string.py $(wildcard $(FLIGHTPLANLIB)/*.py) $(wildcard $(UAVOBJPYTHONSYNTHDIR)/*.py)
@$(PYTHON) $(PYMITETOOLS)/pmGenPmFeatures.py $(PYMITEPLAT)/pmfeatures.py > $(OUTDIR)/pmfeatures.h
@$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -u -o $(OUTDIR)/pmlibusr_img.c --native-file=$(OUTDIR)/pmlibusr_nat.c $(FLIGHTPLANS)/test.py
# Eye candy.
begin:
## @echo
@echo $(MSG_BEGIN)
finished:
## @echo $(MSG_ERRORS_NONE)
end:
@echo $(MSG_END)
## @echo
# Display sizes of sections.
ELFSIZE = $(SIZE) -A $(OUTDIR)/$(TARGET).elf
##ELFSIZE = $(SIZE) --format=Berkeley --common $(OUTDIR)/$(TARGET).elf
sizebefore:
# @if [ -f $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); echo; fi
sizeafter:
# @if [ -f $(OUTDIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
@echo $(MSG_SIZE_AFTER)
$(ELFSIZE)
# Display compiler version information.
gccversion :
@$(CC) --version
# @echo $(ALLOBJ)
# Program the device.
ifeq ($(USE_BOOTLOADER), YES)
# Program the device with OP Upload Tool".
program: $(OUTDIR)/$(TARGET).bin
@echo ${quote}Programming with OP Upload Tool${quote}
../../ground/src/experimental/upload-build-desktop/debug/OPUploadTool -d 0 -p $(OUTDIR)/$(TARGET).bin
else
ifeq ($(FLASH_TOOL),OPENOCD)
# Program the device with Dominic Rath's OPENOCD in "batch-mode", needs cfg and "reset-script".
program: $(OUTDIR)/$(TARGET).elf
@echo ${quote}Programming with OPENOCD${quote}
$(OOCD_EXE) $(OOCD_CL)
endif
endif
# Create final output file (.hex) from ELF output file.
%.hex: %.elf
## @echo
@echo $(MSG_LOAD_FILE) $@
$(OBJCOPY) -O ihex $< $@
# Create final output file (.bin) from ELF output file.
%.bin: %.elf
## @echo
@echo $(MSG_LOAD_FILE) $@
$(OBJCOPY) -O binary $< $@
# Create extended listing file/disassambly from ELF output file.
# using objdump testing: option -C
%.lss: %.elf
## @echo
@echo $(MSG_EXTENDED_LISTING) $@
$(OBJDUMP) -h -S -C -r $< > $@
# $(OBJDUMP) -x -S $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
## @echo
@echo $(MSG_SYMBOL_TABLE) $@
$(NM) -n $< > $@
# Link: create ELF output file from object files.
.SECONDARY : $(TARGET).elf
.PRECIOUS : $(ALLOBJ)
%.elf: $(ALLOBJ)
@echo $(MSG_LINKING) $@
# use $(CC) for C-only projects or $(CPP) for C++-projects:
$(CC) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)
# $(CPP) $(THUMB) $(CFLAGS) $(ALLOBJ) --output $@ $(LDFLAGS)
# Assemble: create object files from assembler source files.
define ASSEMBLE_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
## @echo
@echo $(MSG_ASSEMBLING) $$< to $$@
$(CC) -c $(THUMB) $$(ASFLAGS) $$< -o $$@
endef
$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src))))
# Assemble: create object files from assembler source files. ARM-only
define ASSEMBLE_ARM_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
## @echo
@echo $(MSG_ASSEMBLING_ARM) $$< to $$@
$(CC) -c $$(ASFLAGS) $$< -o $$@
endef
$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src))))
# Compile: create object files from C source files.
define COMPILE_C_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
## @echo
@echo $(MSG_COMPILING) $$< to $$@
$(CC) -c $(THUMB) $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@
endef
$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src))))
# Compile: create object files from C source files. ARM-only
define COMPILE_C_ARM_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
## @echo
@echo $(MSG_COMPILING_ARM) $$< to $$@
$(CC) -c $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@
endef
$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src))))
# Compile: create object files from C++ source files.
define COMPILE_CPP_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
## @echo
@echo $(MSG_COMPILINGCPP) $$< to $$@
$(CC) -c $(THUMB) $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@
endef
$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src))))
# Compile: create object files from C++ source files. ARM-only
define COMPILE_CPP_ARM_TEMPLATE
$(OUTDIR)/$(notdir $(basename $(1))).o : $(1)
## @echo
@echo $(MSG_COMPILINGCPP_ARM) $$< to $$@
$(CC) -c $$(CFLAGS) $$(CPPFLAGS) $$< -o $$@
endef
$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src))))
# Compile: create assembler files from C source files. ARM/Thumb
$(SRC:.c=.s) : %.s : %.c
@echo $(MSG_ASMFROMC) $< to $@
$(CC) $(THUMB) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@
# Compile: create assembler files from C source files. ARM only
$(SRCARM:.c=.s) : %.s : %.c
@echo $(MSG_ASMFROMC_ARM) $< to $@
$(CC) -S $(CFLAGS) $(CONLYFLAGS) $< -o $@
# Generate Doxygen documents
docs:
doxygen $(DOXYGENDIR)/doxygen.cfg
# Target: clean project.
clean: begin clean_list finished end
clean_list :
## @echo
@echo $(MSG_CLEANING)
$(REMOVE) $(OUTDIR)/$(TARGET).map
$(REMOVE) $(OUTDIR)/$(TARGET).elf
$(REMOVE) $(OUTDIR)/$(TARGET).hex
$(REMOVE) $(OUTDIR)/$(TARGET).bin
$(REMOVE) $(OUTDIR)/$(TARGET).sym
$(REMOVE) $(OUTDIR)/$(TARGET).lss
$(REMOVE) $(wildcard $(OUTDIR)/*.c)
$(REMOVE) $(wildcard $(OUTDIR)/*.h)
$(REMOVE) $(ALLOBJ)
$(REMOVE) $(LSTFILES)
$(REMOVE) $(DEPFILES)
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRCARM:.c=.s)
$(REMOVE) $(CPPSRC:.cpp=.s)
$(REMOVE) $(CPPSRCARM:.cpp=.s)
# Create output files directory
# all known MS Windows OS define the ComSpec environment variable
ifdef ComSpec
$(shell md $(OUTDIR) 2>NUL)
else
$(shell mkdir $(OUTDIR) 2>/dev/null)
endif
# Include the dependency files.
ifdef ComSpec
-include $(shell md $(OUTDIR)\dep 2>NUL) $(wildcard $(OUTDIR)/dep/*)
else
-include $(shell mkdir $(OUTDIR) 2>/dev/null) $(shell mkdir $(OUTDIR)/dep 2>/dev/null) $(wildcard $(OUTDIR)/dep/*)
endif
# Listing of phony targets.
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex bin lss sym clean clean_list program gencode