rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Code Issues Releases Activity
eedfb7081c
LibrePilot/flight/targets/boards/osd/board_hw_defs.c
Richard Flay (Hyper) a2d8544931 OP-931: adds -Wextra compiler option for the flight code, and makes the bazillion code changes required 
to make the flight code compile again. Needs careful review, particularly all the fixes for the
signed vs unsigned comparisons.

+review OPReview-459
2013-05-05 16:32:24 +09:30

973 lines
26 KiB
C
Raw Blame History

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file board_hw_defs.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2012.
* @brief Defines board specific static initializers for hardware for the OpenPilot board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#if defined(PIOS_INCLUDE_LED)
#include <pios_led_priv.h>
static const struct pios_led pios_leds[] = {
[PIOS_LED_HEARTBEAT] = {
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
},
[PIOS_LED_ALARM] = {
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
},
};
static const struct pios_led_cfg pios_led_cfg = {
.leds = pios_leds,
.num_leds = NELEMENTS(pios_leds),
};
const struct pios_led_cfg * PIOS_BOARD_HW_DEFS_GetLedCfg (__attribute__((unused)) uint32_t board_revision)
{
return &pios_led_cfg;
}
#endif /* PIOS_INCLUDE_LED */
#if defined(PIOS_INCLUDE_FLASH)
#include "pios_flashfs_logfs_priv.h"
#include "pios_flash_internal_priv.h"
static const struct pios_flash_internal_cfg flash_internal_cfg = {
};
static const struct flashfs_logfs_cfg flashfs_internal_cfg = {
.fs_magic = 0x99abcfef,
.total_fs_size = EE_BANK_SIZE, /* 32K bytes (2x16KB sectors) */
.arena_size = 0x00004000, /* 64 * slot size = 16K bytes = 1 sector */
.slot_size = 0x00000100, /* 256 bytes */
.start_offset = EE_BANK_BASE, /* start after the bootloader */
.sector_size = 0x00004000, /* 16K bytes */
.page_size = 0x00004000, /* 16K bytes */
};
#include "pios_flash.h"
#endif /* PIOS_INCLUDE_FLASH */
#if defined(PIOS_INCLUDE_SPI)
#include <pios_spi_priv.h>
/* MicroSD Interface
*
* NOTE: Leave this declared as const data so that it ends up in the
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
*/
void PIOS_SPI_sdcard_irq_handler(void);
void DMA1_Channel2_IRQHandler() __attribute__ ((alias ("PIOS_SPI_sdcard_irq_handler")));
void DMA1_Channel3_IRQHandler() __attribute__ ((alias ("PIOS_SPI_sdcard_irq_handler")));
static const struct pios_spi_cfg pios_spi_sdcard_cfg = {
.regs = SPI2,
.remap = GPIO_AF_SPI2,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16, /* Maximum divider (ie. slowest clock rate) */
},
.use_crc = false,
.dma = {
.irq = {
.flags = (DMA_IT_TCIF3|DMA_IT_TEIF3|DMA_IT_HTIF3|DMA_IT_TCIF3),
.init = {
.NVIC_IRQChannel = DMA1_Stream3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Stream3,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralToMemory,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
.tx = {
.channel = DMA1_Stream4,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_13,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.slave_count = 1,
.ssel = {{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_OUT,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
}},
};
static uint32_t pios_spi_sdcard_id;
void PIOS_SPI_sdcard_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_sdcard_id);
}
#endif
#include <pios_usart_priv.h>
#if defined(PIOS_INCLUDE_GPS)
/*
* GPS USART
*/
static const struct pios_usart_cfg pios_usart_gps_cfg = {
.regs = USART1,
.remap = GPIO_AF_USART1,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl =
USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
};
#endif /* PIOS_INCLUDE_GPS */
#ifdef PIOS_INCLUDE_COM_AUX
/*
* AUX USART
*/
static const struct pios_usart_cfg pios_usart_aux_cfg = {
.regs = USART2,
.remap = GPIO_AF_USART2,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl =
USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
};
#endif /* PIOS_COM_AUX */
#ifdef PIOS_INCLUDE_COM_TELEM
/*
* Telemetry on main USART
*/
static const struct pios_usart_cfg pios_usart_telem_main_cfg = {
.regs = UART4,
.remap = GPIO_AF_UART4,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl =
USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = UART4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_1,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
};
#endif /* PIOS_COM_TELEM */
#if defined(PIOS_INCLUDE_COM)
#include <pios_com_priv.h>
#endif /* PIOS_INCLUDE_COM */
#if defined(PIOS_INCLUDE_I2C)
#include <pios_i2c_priv.h>
/*
* I2C Adapters
*/
void PIOS_I2C_flexiport_adapter_ev_irq_handler(void);
void PIOS_I2C_flexiport_adapter_er_irq_handler(void);
void I2C2_EV_IRQHandler() __attribute__ ((alias ("PIOS_I2C_flexiport_adapter_ev_irq_handler")));
void I2C2_ER_IRQHandler() __attribute__ ((alias ("PIOS_I2C_flexiport_adapter_er_irq_handler")));
static const struct pios_i2c_adapter_cfg pios_i2c_flexiport_adapter_cfg = {
.regs = I2C2,
.remap = GPIO_AF_I2C2,
.init = {
.I2C_Mode = I2C_Mode_I2C,
.I2C_OwnAddress1 = 0,
.I2C_Ack = I2C_Ack_Enable,
.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit,
.I2C_DutyCycle = I2C_DutyCycle_2,
.I2C_ClockSpeed = 400000, /* bits/s */
},
.transfer_timeout_ms = 50,
.scl = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.sda = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.event = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_EV_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.error = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_ER_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
uint32_t pios_i2c_flexiport_adapter_id;
void PIOS_I2C_flexiport_adapter_ev_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_EV_IRQ_Handler(pios_i2c_flexiport_adapter_id);
}
void PIOS_I2C_flexiport_adapter_er_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_ER_IRQ_Handler(pios_i2c_flexiport_adapter_id);
}
#endif
#if defined(PIOS_INCLUDE_RTC)
/*
* Realtime Clock (RTC)
*/
#include <pios_rtc_priv.h>
void PIOS_RTC_IRQ_Handler (void);
void RTC_WKUP_IRQHandler() __attribute__ ((alias ("PIOS_RTC_IRQ_Handler")));
static const struct pios_rtc_cfg pios_rtc_main_cfg = {
.clksrc = RCC_RTCCLKSource_HSE_Div8, // Divide 8 Mhz crystal down to 1
// For some reason it's acting like crystal is 16 Mhz. This clock is then divided
// by another 16 to give a nominal 62.5 khz clock
.prescaler = 100, // Every 100 cycles gives 625 Hz
.irq = {
.init = {
.NVIC_IRQChannel = RTC_WKUP_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
void PIOS_RTC_IRQ_Handler (void)
{
PIOS_RTC_irq_handler ();
}
#endif
#if defined(PIOS_INCLUDE_USB)
#include "pios_usb_priv.h"
static const struct pios_usb_cfg pios_usb_main_cfg = {
.irq = {
.init = {
.NVIC_IRQChannel = OTG_FS_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.vsense = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_25MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
},
}
};
#include "pios_usb_board_data_priv.h"
#include "pios_usb_desc_hid_cdc_priv.h"
#include "pios_usb_desc_hid_only_priv.h"
#include "pios_usbhook.h"
#endif /* PIOS_INCLUDE_USB */
#if defined(PIOS_INCLUDE_COM_MSG)
#include <pios_com_msg_priv.h>
#endif /* PIOS_INCLUDE_COM_MSG */
#if defined(PIOS_INCLUDE_USB_HID)
#include <pios_usb_hid_priv.h>
const struct pios_usb_hid_cfg pios_usb_hid_cfg = {
.data_if = 0,
.data_rx_ep = 1,
.data_tx_ep = 1,
};
#endif /* PIOS_INCLUDE_USB_HID */
#if defined(PIOS_INCLUDE_USB_CDC)
#include <pios_usb_cdc_priv.h>
const struct pios_usb_cdc_cfg pios_usb_cdc_cfg = {
.ctrl_if = 1,
.ctrl_tx_ep = 2,
.data_if = 2,
.data_rx_ep = 3,
.data_tx_ep = 3,
};
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_VIDEO)
static const TIM_TimeBaseInitTypeDef tim_8_time_base = {
.TIM_Prescaler = (PIOS_PERIPHERAL_APB2_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = ((1000000 / 50000) - 1),
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_8_cfg = {
.timer = TIM8,
.time_base_init = &tim_8_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM8_CC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
/**
* Pios servo configuration structures
*/
#include <pios_servo_priv.h>
static const struct pios_tim_channel pios_tim_servoport_all_pins[] = {
{
.timer = TIM8,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
.pin_source = GPIO_PinSource8,
},
.remap = GPIO_AF_TIM8,
},
{
.timer = TIM8,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
.pin_source = GPIO_PinSource9,
},
.remap = GPIO_AF_TIM8,
},
};
const struct pios_servo_cfg pios_servo_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = 0,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = pios_tim_servoport_all_pins,
.num_channels = NELEMENTS(pios_tim_servoport_all_pins),
};
#include <pios_video.h>
static const struct pios_exti_cfg pios_exti_hsync_cfg __exti_config = {
.vector = PIOS_Hsync_ISR,
.line = EXTI_Line7,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI9_5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line7, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
//.EXTI_Trigger = EXTI_Trigger_Rising_Falling,
.EXTI_Trigger = EXTI_Trigger_Falling,
//.EXTI_Trigger = EXTI_Trigger_Rising,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_exti_cfg pios_exti_vsync_cfg __exti_config = {
.vector = PIOS_Vsync_ISR,
.line = EXTI_Line5,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_OType = GPIO_OType_OD,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
.irq = {
.init = {
.NVIC_IRQChannel = EXTI9_5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.exti = {
.init = {
.EXTI_Line = EXTI_Line5, // matches above GPIO pin
.EXTI_Mode = EXTI_Mode_Interrupt,
.EXTI_Trigger = EXTI_Trigger_Falling,
.EXTI_LineCmd = ENABLE,
},
},
};
static const struct pios_video_cfg pios_video_cfg = {
.mask = {
.regs = SPI3,
.remap = GPIO_AF_SPI3,
.init = {
.SPI_Mode = SPI_Mode_Slave,
.SPI_Direction = SPI_Direction_1Line_Tx,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_Low,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2,
},
.use_crc = false,
.dma = {
.irq = {
// Note this is the stream ID that triggers interrupts (in this case RX)
.flags = (DMA_IT_TCIF7),
.init = {
.NVIC_IRQChannel = DMA1_Stream7_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
/*.rx = {},*/
.tx = {
.channel = DMA1_Stream7,
.init = {
.DMA_Channel = DMA_Channel_0,
.DMA_PeripheralBaseAddr = (uint32_t) & (SPI3->DR),
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_BufferSize = BUFFER_LINE_LENGTH,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_VeryHigh,
.DMA_FIFOMode = DMA_FIFOMode_Enable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_INC4,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.sclk = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL
},
},
.miso = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL
},
},
/*.mosi = {},*/
.slave_count = 1,
},
.level = {
.regs = SPI1,
.remap = GPIO_AF_SPI1,
.init = {
.SPI_Mode = SPI_Mode_Slave,
.SPI_Direction = SPI_Direction_1Line_Tx,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_Low,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2,
},
.use_crc = false,
.dma = {
.irq = {
.flags = (DMA_IT_TCIF5),
.init = {
.NVIC_IRQChannel = DMA2_Stream5_IRQn,
.NVIC_IRQChannelPreemptionPriority = 0,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
/*.rx = {},*/
.tx = {
.channel = DMA2_Stream5,
.init = {
.DMA_Channel = DMA_Channel_3,
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_BufferSize = BUFFER_LINE_LENGTH,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_VeryHigh,
.DMA_FIFOMode = DMA_FIFOMode_Enable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_INC4,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
},
/*.mosi = {},*/
.slave_count = 1,
},
.hsync = &pios_exti_hsync_cfg,
.vsync = &pios_exti_vsync_cfg,
.pixel_timer = {
.timer = TIM4,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
.pin_source = GPIO_PinSource6,
},
.remap = GPIO_AF_TIM4,
},
.hsync_capture = {
.timer = TIM4,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_100MHz,
.GPIO_Mode = GPIO_Mode_AF,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_UP
},
.pin_source = GPIO_PinSource7,
},
.remap = GPIO_AF_TIM4,
},
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = 1,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
};
#endif
#if defined(PIOS_INCLUDE_WAVE)
#include <pios_wavplay.h>
#include <pios_tim_priv.h>
static const TIM_TimeBaseInitTypeDef tim_6_time_base = {
.TIM_Prescaler = 0,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = (PIOS_PERIPHERAL_APB1_CLOCK / 44100),
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_6_cfg = {
.timer = TIM6,
.time_base_init = &tim_6_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM6_DAC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_dac_cfg pios_dac_cfg = {
.timer = TIM6,
.time_base_init = {
.TIM_Prescaler = 0,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = (PIOS_PERIPHERAL_APB1_CLOCK / 44100),
.TIM_RepetitionCounter = 0x0000,
},
.irq = {
.init = {
.NVIC_IRQChannel = TIM6_DAC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.dma = {
.irq = {
// Note this is the stream ID that triggers interrupts (in this case RX)
.flags = (DMA_IT_TCIF5),
.init = {
.NVIC_IRQChannel = DMA1_Stream5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {},
.tx = {
.channel = DMA1_Stream5,
.init = {
.DMA_Channel = DMA_Channel_7,
.DMA_PeripheralBaseAddr = (uint32_t)&DAC->DHR8R1,
.DMA_DIR = DMA_DIR_MemoryToPeripheral,
.DMA_BufferSize = BUFFERSIZE,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Circular,
.DMA_Priority = DMA_Priority_High,
.DMA_FIFOMode = DMA_FIFOMode_Disable,
.DMA_FIFOThreshold = DMA_FIFOThreshold_Full,
.DMA_MemoryBurst = DMA_MemoryBurst_Single,
.DMA_PeripheralBurst = DMA_PeripheralBurst_Single,
},
},
},
.channel = DAC_Channel_1,
.dac_init = {
.DAC_Trigger = DAC_Trigger_T6_TRGO,
.DAC_WaveGeneration = DAC_WaveGeneration_None,
.DAC_OutputBuffer = DAC_OutputBuffer_Enable,
},
.dac_io = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AN,
.GPIO_OType = GPIO_OType_PP,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
},
},
};
#endif
Reference in New Issue View Git Blame Copy Permalink