rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
f5e82b8242
LibrePilot/flight/OpenPilot/System/pios_board.c
Oleg Semyonov f5e82b8242 spektrum: rename Spektrum to DSM (DSM2/DSMJ/DSMX used by Spektrum and JR radios) 
No code changes, just file, variable and define names are changed.

First, it better describes the serial protocol used by DSMx satellite
receivers. Second, many people using Spektrum radio, assume Spektrum
protocol. This is the attempt to address those inaccuracies.
2011-11-04 21:40:34 +02:00

1307 lines
33 KiB
C
Raw Blame History

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file pios_board.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief Defines board specific static initializers for hardware for the OpenPilot board.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <pios.h>
#include <openpilot.h>
#include <uavobjectsinit.h>
#include <hwsettings.h>
#include "manualcontrolsettings.h"
//#define I2C_DEBUG_PIN 0
//#define USART_GPS_DEBUG_PIN 1
#if defined(PIOS_INCLUDE_SPI)
#include <pios_spi_priv.h>
/* MicroSD Interface
*
* NOTE: Leave this declared as const data so that it ends up in the
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
*/
void PIOS_SPI_sdcard_irq_handler(void);
void DMA1_Channel2_IRQHandler() __attribute__ ((alias ("PIOS_SPI_sdcard_irq_handler")));
void DMA1_Channel3_IRQHandler() __attribute__ ((alias ("PIOS_SPI_sdcard_irq_handler")));
static const struct pios_spi_cfg pios_spi_sdcard_cfg = {
.regs = SPI1,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256, /* Maximum divider (ie. slowest clock rate) */
},
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC2 | DMA1_FLAG_TE2 | DMA1_FLAG_HT2 | DMA1_FLAG_GL2),
.init = {
.NVIC_IRQChannel = DMA1_Channel2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel2,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_M2M = DMA_M2M_Disable,
},
},
.tx = {
.channel = DMA1_Channel3,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI1->DR),
.DMA_DIR = DMA_DIR_PeripheralDST,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_Medium,
.DMA_M2M = DMA_M2M_Disable,
},
},
},
.ssel = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
.sclk = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.miso = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.mosi = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
/* AHRS Interface
*
* NOTE: Leave this declared as const data so that it ends up in the
* .rodata section (ie. Flash) rather than in the .bss section (RAM).
*/
void PIOS_SPI_ahrs_irq_handler(void);
void DMA1_Channel4_IRQHandler() __attribute__ ((alias ("PIOS_SPI_ahrs_irq_handler")));
void DMA1_Channel5_IRQHandler() __attribute__ ((alias ("PIOS_SPI_ahrs_irq_handler")));
static const struct pios_spi_cfg pios_spi_ahrs_cfg = {
.regs = SPI2,
.init = {
.SPI_Mode = SPI_Mode_Master,
.SPI_Direction = SPI_Direction_2Lines_FullDuplex,
.SPI_DataSize = SPI_DataSize_8b,
.SPI_NSS = SPI_NSS_Soft,
.SPI_FirstBit = SPI_FirstBit_MSB,
.SPI_CRCPolynomial = 7,
.SPI_CPOL = SPI_CPOL_High,
.SPI_CPHA = SPI_CPHA_2Edge,
.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16,
},
.use_crc = TRUE,
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC4 | DMA1_FLAG_TE4 | DMA1_FLAG_HT4 | DMA1_FLAG_GL4),
.init = {
.NVIC_IRQChannel = DMA1_Channel4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel4,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
.tx = {
.channel = DMA1_Channel5,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t)&(SPI2->DR),
.DMA_DIR = DMA_DIR_PeripheralDST,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte,
.DMA_Mode = DMA_Mode_Normal,
.DMA_Priority = DMA_Priority_High,
.DMA_M2M = DMA_M2M_Disable,
},
},
},
.ssel = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_12,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
.sclk = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_13,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
.miso = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_14,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
.mosi = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_15,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
static uint32_t pios_spi_sdcard_id;
void PIOS_SPI_sdcard_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_sdcard_id);
}
uint32_t pios_spi_ahrs_id;
void PIOS_SPI_ahrs_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_SPI_IRQ_Handler(pios_spi_ahrs_id);
}
#endif /* PIOS_INCLUDE_SPI */
/*
* ADC system
*/
#include "pios_adc_priv.h"
extern void PIOS_ADC_handler(void);
void DMA1_Channel1_IRQHandler() __attribute__ ((alias("PIOS_ADC_handler")));
// Remap the ADC DMA handler to this one
static const struct pios_adc_cfg pios_adc_cfg = {
.dma = {
.ahb_clk = RCC_AHBPeriph_DMA1,
.irq = {
.flags = (DMA1_FLAG_TC1 | DMA1_FLAG_TE1 | DMA1_FLAG_HT1 | DMA1_FLAG_GL1),
.init = {
.NVIC_IRQChannel = DMA1_Channel1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.channel = DMA1_Channel1,
.init = {
.DMA_PeripheralBaseAddr = (uint32_t) & ADC1->DR,
.DMA_DIR = DMA_DIR_PeripheralSRC,
.DMA_PeripheralInc = DMA_PeripheralInc_Disable,
.DMA_MemoryInc = DMA_MemoryInc_Enable,
.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word,
.DMA_MemoryDataSize = DMA_MemoryDataSize_Word,
.DMA_Mode = DMA_Mode_Circular,
.DMA_Priority = DMA_Priority_Low,
.DMA_M2M = DMA_M2M_Disable,
},
}
},
.half_flag = DMA1_IT_HT1,
.full_flag = DMA1_IT_TC1,
};
struct pios_adc_dev pios_adc_devs[] = {
{
.cfg = &pios_adc_cfg,
.callback_function = NULL,
},
};
uint8_t pios_adc_num_devices = NELEMENTS(pios_adc_devs);
void PIOS_ADC_handler() {
PIOS_ADC_DMA_Handler();
}
#include "pios_tim_priv.h"
static const TIM_TimeBaseInitTypeDef tim_4_8_time_base = {
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = ((1000000 / PIOS_SERVO_UPDATE_HZ) - 1),
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_4_cfg = {
.timer = TIM4,
.time_base_init = &tim_4_8_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM4_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_8_cfg = {
.timer = TIM8,
.time_base_init = &tim_4_8_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM8_CC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const TIM_TimeBaseInitTypeDef tim_1_3_5_time_base = {
.TIM_Prescaler = (PIOS_MASTER_CLOCK / 1000000) - 1,
.TIM_ClockDivision = TIM_CKD_DIV1,
.TIM_CounterMode = TIM_CounterMode_Up,
.TIM_Period = 0xFFFF,
.TIM_RepetitionCounter = 0x0000,
};
static const struct pios_tim_clock_cfg tim_1_cfg = {
.timer = TIM1,
.time_base_init = &tim_1_3_5_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM1_CC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_3_cfg = {
.timer = TIM3,
.time_base_init = &tim_1_3_5_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
static const struct pios_tim_clock_cfg tim_5_cfg = {
.timer = TIM5,
.time_base_init = &tim_1_3_5_time_base,
.irq = {
.init = {
.NVIC_IRQChannel = TIM5_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
#if defined(PIOS_INCLUDE_USART)
#include "pios_usart_priv.h"
/*
* Telemetry USART
*/
static const struct pios_usart_cfg pios_usart_telem_cfg = {
.regs = USART2,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART2_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_3,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_2,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
/*
* GPS USART
*/
static const struct pios_usart_cfg pios_usart_gps_cfg = {
.regs = USART3,
.remap = GPIO_PartialRemap_USART3,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART3_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
#ifdef PIOS_COM_AUX
/*
* AUX USART
*/
static const struct pios_usart_cfg pios_usart_aux_cfg = {
.regs = USART1,
.init = {
.USART_BaudRate = 57600,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx | USART_Mode_Tx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.remap = GPIO_Remap_USART1,
.rx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_AF_PP,
},
},
};
#endif
#if defined(PIOS_INCLUDE_RTC)
/*
* Realtime Clock (RTC)
*/
#include <pios_rtc_priv.h>
void PIOS_RTC_IRQ_Handler (void);
void RTC_IRQHandler() __attribute__ ((alias ("PIOS_RTC_IRQ_Handler")));
static const struct pios_rtc_cfg pios_rtc_main_cfg = {
.clksrc = RCC_RTCCLKSource_HSE_Div128,
.prescaler = 100,
.irq = {
.init = {
.NVIC_IRQChannel = RTC_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_MID,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
void PIOS_RTC_IRQ_Handler (void)
{
PIOS_RTC_irq_handler ();
}
#endif
#if defined(PIOS_INCLUDE_DSM)
/*
* Spektrum/JR DSM USART
*/
#include <pios_dsm_priv.h>
static const struct pios_usart_cfg pios_usart_dsm_cfg = {
.regs = USART1,
.init = {
.USART_BaudRate = 115200,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_No,
.USART_StopBits = USART_StopBits_1,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
};
static const struct pios_dsm_cfg pios_dsm_cfg = {
.bind = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
};
#endif /* PIOS_COM_DSM */
#if defined(PIOS_INCLUDE_SBUS)
#error PIOS_INCLUDE_SBUS not implemented
#endif /* PIOS_INCLUDE_SBUS */
#endif /* PIOS_INCLUDE_USART */
#if defined(PIOS_INCLUDE_COM)
#include "pios_com_priv.h"
#define PIOS_COM_TELEM_RF_RX_BUF_LEN 192
#define PIOS_COM_TELEM_RF_TX_BUF_LEN 192
#define PIOS_COM_GPS_RX_BUF_LEN 96
#define PIOS_COM_TELEM_USB_RX_BUF_LEN 192
#define PIOS_COM_TELEM_USB_TX_BUF_LEN 192
#endif /* PIOS_INCLUDE_COM */
/**
* Pios servo configuration structures
*/
#include <pios_servo_priv.h>
static const struct pios_tim_channel pios_tim_servoport_all_pins[] = {
{
.timer = TIM4,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM4,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM4,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM4,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM8,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM8,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM8,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM8,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_AF_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
};
const struct pios_servo_cfg pios_servo_cfg = {
.tim_oc_init = {
.TIM_OCMode = TIM_OCMode_PWM1,
.TIM_OutputState = TIM_OutputState_Enable,
.TIM_OutputNState = TIM_OutputNState_Disable,
.TIM_Pulse = PIOS_SERVOS_INITIAL_POSITION,
.TIM_OCPolarity = TIM_OCPolarity_High,
.TIM_OCNPolarity = TIM_OCPolarity_High,
.TIM_OCIdleState = TIM_OCIdleState_Reset,
.TIM_OCNIdleState = TIM_OCNIdleState_Reset,
},
.channels = pios_tim_servoport_all_pins,
.num_channels = NELEMENTS(pios_tim_servoport_all_pins),
};
/*
* PWM Inputs
*/
#if defined(PIOS_INCLUDE_PWM) || defined(PIOS_INCLUDE_PPM)
#include <pios_pwm_priv.h>
static const struct pios_tim_channel pios_tim_rcvrport_all_channels[] = {
{
.timer = TIM1,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM1,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM5,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM1,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_4,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_1,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_3,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_1,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_4,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap_TIM3,
},
{
.timer = TIM3,
.timer_chan = TIM_Channel_2,
.pin = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_5,
.GPIO_Mode = GPIO_Mode_IPD,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.remap = GPIO_PartialRemap_TIM3,
},
};
const struct pios_pwm_cfg pios_pwm_cfg = {
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
},
.channels = pios_tim_rcvrport_all_channels,
.num_channels = NELEMENTS(pios_tim_rcvrport_all_channels),
};
#endif
/*
* PPM Input
*/
#if defined(PIOS_INCLUDE_PPM)
#include <pios_ppm_priv.h>
static const struct pios_ppm_cfg pios_ppm_cfg = {
.tim_ic_init = {
.TIM_ICPolarity = TIM_ICPolarity_Rising,
.TIM_ICSelection = TIM_ICSelection_DirectTI,
.TIM_ICPrescaler = TIM_ICPSC_DIV1,
.TIM_ICFilter = 0x0,
.TIM_Channel = TIM_Channel_2,
},
/* Use only the first channel for ppm */
.channels = &pios_tim_rcvrport_all_channels[0],
.num_channels = 1,
};
#endif //PPM
#if defined(PIOS_INCLUDE_I2C)
#include <pios_i2c_priv.h>
/*
* I2C Adapters
*/
void PIOS_I2C_main_adapter_ev_irq_handler(void);
void PIOS_I2C_main_adapter_er_irq_handler(void);
void I2C2_EV_IRQHandler() __attribute__ ((alias ("PIOS_I2C_main_adapter_ev_irq_handler")));
void I2C2_ER_IRQHandler() __attribute__ ((alias ("PIOS_I2C_main_adapter_er_irq_handler")));
static const struct pios_i2c_adapter_cfg pios_i2c_main_adapter_cfg = {
.regs = I2C2,
.init = {
.I2C_Mode = I2C_Mode_I2C,
.I2C_OwnAddress1 = 0,
.I2C_Ack = I2C_Ack_Enable,
.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit,
.I2C_DutyCycle = I2C_DutyCycle_2,
.I2C_ClockSpeed = 400000, /* bits/s */
},
.transfer_timeout_ms = 50,
.scl = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
},
.sda = {
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_11,
.GPIO_Speed = GPIO_Speed_10MHz,
.GPIO_Mode = GPIO_Mode_AF_OD,
},
},
.event = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_EV_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.error = {
.flags = 0, /* FIXME: check this */
.init = {
.NVIC_IRQChannel = I2C2_ER_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGHEST,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
uint32_t pios_i2c_main_adapter_id;
void PIOS_I2C_main_adapter_ev_irq_handler(void)
{
#ifdef I2C_DEBUG_PIN
PIOS_DEBUG_PinHigh(I2C_DEBUG_PIN);
#endif
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_EV_IRQ_Handler(pios_i2c_main_adapter_id);
#ifdef I2C_DEBUG_PIN
PIOS_DEBUG_PinLow(I2C_DEBUG_PIN);
#endif
}
void PIOS_I2C_main_adapter_er_irq_handler(void)
{
/* Call into the generic code to handle the IRQ for this specific device */
PIOS_I2C_ER_IRQ_Handler(pios_i2c_main_adapter_id);
}
#endif /* PIOS_INCLUDE_I2C */
#if defined(PIOS_ENABLE_DEBUG_PINS)
static const struct stm32_gpio pios_debug_pins[] = {
#define PIOS_DEBUG_PIN_SERVO_1 0
{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
#define PIOS_DEBUG_PIN_SERVO_2 1
{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
#define PIOS_DEBUG_PIN_SERVO_3 2
{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
#define PIOS_DEBUG_PIN_SERVO_4 3
{
.gpio = GPIOB,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
#define PIOS_DEBUG_PIN_SERVO_5 4
{
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_6,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
#define PIOS_DEBUG_PIN_SERVO_6 5
{
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_7,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
#define PIOS_DEBUG_PIN_SERVO_7 6
{
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_8,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
#define PIOS_DEBUG_PIN_SERVO_8 7
{
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_50MHz,
.GPIO_Mode = GPIO_Mode_Out_PP,
},
},
};
#endif /* PIOS_ENABLE_DEBUG_PINS */
#if defined(PIOS_INCLUDE_RCVR)
#include "pios_rcvr_priv.h"
/* One slot per selectable receiver group.
* eg. PWM, PPM, GCS, DSMMAINPORT, DSMFLEXIPORT, SBUS
* NOTE: No slot in this map for NONE.
*/
uint32_t pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_NONE];
#endif /* PIOS_INCLUDE_RCVR */
#if defined(PIOS_INCLUDE_USB_HID)
#include "pios_usb_hid_priv.h"
static const struct pios_usb_hid_cfg pios_usb_hid_main_cfg = {
.irq = {
.init = {
.NVIC_IRQChannel = USB_LP_CAN1_RX0_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_LOW,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
};
#endif /* PIOS_INCLUDE_USB_HID */
extern const struct pios_com_driver pios_usb_com_driver;
uint32_t pios_com_telem_rf_id;
uint32_t pios_com_telem_usb_id;
uint32_t pios_com_gps_id;
uint32_t pios_com_aux_id;
uint32_t pios_com_dsm_id;
#include "ahrs_spi_comm.h"
/**
* PIOS_Board_Init()
* initializes all the core subsystems on this specific hardware
* called from System/openpilot.c
*/
void PIOS_Board_Init(void) {
/* Remap AFIO pin */
//GPIO_PinRemapConfig( GPIO_Remap_SWJ_NoJTRST, ENABLE);
#ifdef PIOS_DEBUG_ENABLE_DEBUG_PINS
PIOS_DEBUG_Init(&pios_tim_servo_all_channels, NELEMENTS(pios_tim_servo_all_channels));
#endif /* PIOS_DEBUG_ENABLE_DEBUG_PINS */
/* Delay system */
PIOS_DELAY_Init();
#if defined(PIOS_INCLUDE_SPI)
/* Set up the SPI interface to the SD card */
if (PIOS_SPI_Init(&pios_spi_sdcard_id, &pios_spi_sdcard_cfg)) {
PIOS_Assert(0);
}
/* Enable and mount the SDCard */
PIOS_SDCARD_Init(pios_spi_sdcard_id);
PIOS_SDCARD_MountFS(0);
#endif /* PIOS_INCLUDE_SPI */
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
HwSettingsInitialize();
#if defined(PIOS_INCLUDE_RTC)
/* Initialize the real-time clock and its associated tick */
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
/* Initialize the alarms library */
AlarmsInitialize();
/* Initialize the task monitor library */
TaskMonitorInitialize();
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_5_cfg);
PIOS_TIM_InitClock(&tim_4_cfg);
PIOS_TIM_InitClock(&tim_8_cfg);
/* Prepare the AHRS Comms upper layer protocol */
AhrsInitComms();
/* Set up the SPI interface to the AHRS */
if (PIOS_SPI_Init(&pios_spi_ahrs_id, &pios_spi_ahrs_cfg)) {
PIOS_Assert(0);
}
/* Bind the AHRS comms layer to the AHRS SPI link */
AhrsConnect(pios_spi_ahrs_id);
/* Configure the main IO port */
uint8_t hwsettings_op_mainport;
HwSettingsOP_MainPortGet(&hwsettings_op_mainport);
switch (hwsettings_op_mainport) {
case HWSETTINGS_OP_MAINPORT_DISABLED:
break;
case HWSETTINGS_OP_MAINPORT_TELEMETRY:
#if defined(PIOS_INCLUDE_TELEMETRY_RF)
{
uint32_t pios_usart_telem_rf_id;
if (PIOS_USART_Init(&pios_usart_telem_rf_id, &pios_usart_telem_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_RF_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_rf_id, &pios_usart_com_driver, pios_usart_telem_rf_id,
rx_buffer, PIOS_COM_TELEM_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_RF_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_TELEMETRY_RF */
break;
}
/* Configure the flexi port */
uint8_t hwsettings_op_flexiport;
HwSettingsOP_FlexiPortGet(&hwsettings_op_flexiport);
switch (hwsettings_op_flexiport) {
case HWSETTINGS_OP_FLEXIPORT_DISABLED:
break;
case HWSETTINGS_OP_FLEXIPORT_GPS:
#if defined(PIOS_INCLUDE_GPS)
{
uint32_t pios_usart_gps_id;
if (PIOS_USART_Init(&pios_usart_gps_id, &pios_usart_gps_cfg)) {
PIOS_Assert(0);
}
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_GPS_RX_BUF_LEN);
PIOS_Assert(rx_buffer);
if (PIOS_COM_Init(&pios_com_gps_id, &pios_usart_com_driver, pios_usart_gps_id,
rx_buffer, PIOS_COM_GPS_RX_BUF_LEN,
NULL, 0)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_GPS */
break;
}
#ifndef PIOS_DEBUG_ENABLE_DEBUG_PINS
PIOS_Servo_Init(&pios_servo_cfg);
#endif /* PIOS_DEBUG_ENABLE_DEBUG_PINS */
PIOS_ADC_Init();
PIOS_GPIO_Init();
/* Configure the rcvr port */
uint8_t hwsettings_rcvrport;
HwSettingsOP_RcvrPortGet(&hwsettings_rcvrport);
switch (hwsettings_rcvrport) {
case HWSETTINGS_OP_RCVRPORT_DISABLED:
break;
case HWSETTINGS_OP_RCVRPORT_DEBUG:
/* Not supported yet */
break;
case HWSETTINGS_OP_RCVRPORT_DSM2:
case HWSETTINGS_OP_RCVRPORT_DSMX10BIT:
case HWSETTINGS_OP_RCVRPORT_DSMX11BIT:
#if defined(PIOS_INCLUDE_DSM)
{
enum pios_dsm_proto proto;
switch (hwsettings_rcvrport) {
case HWSETTINGS_OP_RCVRPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
case HWSETTINGS_OP_RCVRPORT_DSMX10BIT:
proto = PIOS_DSM_PROTO_DSMX10BIT;
break;
case HWSETTINGS_OP_RCVRPORT_DSMX11BIT:
proto = PIOS_DSM_PROTO_DSMX11BIT;
break;
default:
PIOS_Assert(0);
break;
}
uint32_t pios_usart_dsm_id;
if (PIOS_USART_Init(&pios_usart_dsm_id, &pios_usart_dsm_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_id;
if (PIOS_DSM_Init(&pios_dsm_id,
&pios_dsm_cfg,
&pios_usart_com_driver,
pios_usart_dsm_id,
proto, 0)) {
PIOS_Assert(0);
}
uint32_t pios_dsm_rcvr_id;
if (PIOS_RCVR_Init(&pios_dsm_rcvr_id, &pios_dsm_rcvr_driver, pios_dsm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT] = pios_dsm_rcvr_id;
}
#endif
break;
case HWSETTINGS_OP_RCVRPORT_PWM:
#if defined(PIOS_INCLUDE_PWM)
{
uint32_t pios_pwm_id;
PIOS_PWM_Init(&pios_pwm_id, &pios_pwm_cfg);
uint32_t pios_pwm_rcvr_id;
if (PIOS_RCVR_Init(&pios_pwm_rcvr_id, &pios_pwm_rcvr_driver, pios_pwm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PWM] = pios_pwm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PWM */
break;
case HWSETTINGS_OP_RCVRPORT_PPM:
#if defined(PIOS_INCLUDE_PPM)
{
uint32_t pios_ppm_id;
PIOS_PPM_Init(&pios_ppm_id, &pios_ppm_cfg);
uint32_t pios_ppm_rcvr_id;
if (PIOS_RCVR_Init(&pios_ppm_rcvr_id, &pios_ppm_rcvr_driver, pios_ppm_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_PPM] = pios_ppm_rcvr_id;
}
#endif /* PIOS_INCLUDE_PPM */
break;
}
#if defined(PIOS_INCLUDE_USB_HID)
uint32_t pios_usb_hid_id;
PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_main_cfg);
#if defined(PIOS_INCLUDE_COM)
uint8_t * rx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t * tx_buffer = (uint8_t *) pvPortMalloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
#endif /* PIOS_INCLUDE_COM */
#endif /* PIOS_INCLUDE_USB_HID */
#if defined(PIOS_INCLUDE_I2C)
if (PIOS_I2C_Init(&pios_i2c_main_adapter_id, &pios_i2c_main_adapter_cfg)) {
PIOS_Assert(0);
}
#endif /* PIOS_INCLUDE_I2C */
PIOS_IAP_Init();
PIOS_WDG_Init();
}
/**
* @}
*/
Reference in New Issue View Git Blame Copy Permalink