1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
LibrePilot/flight/INS/ins.c
Stacey Sheldon 6bb4f0c61d leds: use boot-time config for PiOS LED layer
LEDs are now configured based on a board-specific initialization
in PIOS_BOARD_Init().

LEDs are now named:
  PIOS_LED_HEARTBEAT
  PIOS_LED_ALARM
2012-01-22 18:22:59 -05:00

219 lines
4.9 KiB
C

/**
******************************************************************************
* @addtogroup INS INS
* @brief The INS Modules perform
*
* @{
* @addtogroup INS_Main
* @brief Main function which does the hardware dependent stuff
* @{
*
*
* @file ins.c
* @author David "Buzz" Carlson (buzz@chebuzz.com)
* The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011.
* @brief INSGPS Test Program
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* OpenPilot Includes */
#include "ins.h"
#include "pios.h"
#include <stdbool.h>
#include "fifo_buffer.h"
void reset_values();
/**
* @addtogroup INS_Global_Data INS Global Data
* @{
* Public data. Used by both EKF and the sender
*/
//! Contains the data from the mag sensor chip
struct mag_sensor mag_data;
//! Contains the data from the accelerometer
struct accel_sensor accel_data;
//! Contains the data from the gyro
struct gyro_sensor gyro_data;
//! Conains the current estimate of the attitude
struct attitude_solution attitude_data;
//! Contains data from the altitude sensor
struct altitude_sensor altitude_data;
//! Contains data from the GPS (via the SPI link)
struct gps_sensor gps_data;
//! Offset correction of barometric alt, to match gps data
//static float baro_offset = 0;
//static float mag_len = 0;
typedef enum { INS_IDLE, INS_DATA_READY, INS_PROCESSING } states;
volatile int32_t ekf_too_slow;
volatile int32_t total_conversion_blocks;
/**
* @}
*/
/* INS functions */
void blink(int led, int times)
{
for(int i=0; i<times; i++)
{
PIOS_LED_Toggle(led);
PIOS_DELAY_WaitmS(250);
PIOS_LED_Toggle(led);
PIOS_DELAY_WaitmS(250);
}
}
void test_accel()
{
if(PIOS_BMA180_Test())
blink(PIOS_LED_HEARTBEAT, 1);
else
blink(PIOS_LED_ALARM, 1);
}
#if defined (PIOS_INCLUDE_HMC5883)
void test_mag()
{
if(PIOS_HMC5883_Test())
blink(PIOS_LED_HEARTBEAT, 2);
else
blink(PIOS_LED_ALARM, 2);
}
#endif
#if defined (PIOS_INCLUDE_BMP085)
void test_pressure()
{
if(PIOS_BMP085_Test())
blink(PIOS_LED_HEARTBEAT, 3);
else
blink(PIOS_LED_ALARM, 3);
}
#endif
#if defined (PIOS_INCLUDE_IMU3000)
void test_imu()
{
if(PIOS_IMU3000_Test())
blink(PIOS_LED_HEARTBEAT, 4);
else
blink(PIOS_LED_ALARM, 4);
}
#endif
extern void PIOS_Board_Init(void);
struct pios_bma180_data bma180_data;
/**
* @brief INS Main function
*/
int main()
{
reset_values();
PIOS_Board_Init();
while (1)
{
test_accel();
PIOS_DELAY_WaitmS(1000);
#if defined (PIOS_INCLUDE_HMC5883)
test_mag();
PIOS_DELAY_WaitmS(1000);
#endif
#if defined (PIOS_INCLUDE_BMP085)
test_pressure();
PIOS_DELAY_WaitmS(1000);
#endif
#if defined (PIOS_INCLUDE_IMU3000)
test_imu();
PIOS_DELAY_WaitmS(1000);
#endif
PIOS_DELAY_WaitmS(3000);
}
}
/**
* @brief Populate fields with initial values
*/
void reset_values()
{
accel_data.calibration.scale[0][1] = 0;
accel_data.calibration.scale[1][0] = 0;
accel_data.calibration.scale[0][2] = 0;
accel_data.calibration.scale[2][0] = 0;
accel_data.calibration.scale[1][2] = 0;
accel_data.calibration.scale[2][1] = 0;
accel_data.calibration.scale[0][0] = 0.0359;
accel_data.calibration.scale[1][1] = 0.0359;
accel_data.calibration.scale[2][2] = 0.0359;
accel_data.calibration.scale[0][3] = -73.5;
accel_data.calibration.scale[1][3] = -73.5;
accel_data.calibration.scale[2][3] = -73.5;
accel_data.calibration.variance[0] = 1e-4;
accel_data.calibration.variance[1] = 1e-4;
accel_data.calibration.variance[2] = 1e-4;
gyro_data.calibration.scale[0] = -0.014;
gyro_data.calibration.scale[1] = 0.014;
gyro_data.calibration.scale[2] = -0.014;
gyro_data.calibration.bias[0] = -24;
gyro_data.calibration.bias[1] = -24;
gyro_data.calibration.bias[2] = -24;
gyro_data.calibration.variance[0] = 1;
gyro_data.calibration.variance[1] = 1;
gyro_data.calibration.variance[2] = 1;
mag_data.calibration.scale[0] = 1;
mag_data.calibration.scale[1] = 1;
mag_data.calibration.scale[2] = 1;
mag_data.calibration.bias[0] = 0;
mag_data.calibration.bias[1] = 0;
mag_data.calibration.bias[2] = 0;
mag_data.calibration.variance[0] = 50;
mag_data.calibration.variance[1] = 50;
mag_data.calibration.variance[2] = 50;
}
/**
* @}
*/