mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-11-30 08:24:11 +01:00
317 lines
8.8 KiB
C
317 lines
8.8 KiB
C
/**
|
|
******************************************************************************
|
|
* @addtogroup PIOS PIOS Core hardware abstraction layer
|
|
* @{
|
|
* @addtogroup PIOS_IMU3000 IMU3000 Functions
|
|
* @brief Deals with the hardware interface to the 3-axis gyro
|
|
* @{
|
|
*
|
|
* @file pios_IMU3000.c
|
|
* @author David "Buzz" Carlson (buzz@chebuzz.com)
|
|
* The OpenPilot Team, http://www.openpilot.org Copyright (C) 2011.
|
|
* @brief IMU3000 3-axis gyor functions from INS
|
|
* @see The GNU Public License (GPL) Version 3
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
/* Project Includes */
|
|
#include "pios.h"
|
|
|
|
#if defined(PIOS_INCLUDE_IMU3000)
|
|
|
|
/* Global Variables */
|
|
|
|
/* Local Types */
|
|
typedef struct {
|
|
uint8_t Fifo_store; /* FIFO storage of different readings (See datasheet page 31 for more details) */
|
|
uint8_t Smpl_rate_div; /* Sample rate divider to use (See datasheet page 32 for more details) */
|
|
uint8_t DigLPF_Scale; /* Digital low-pass filter and full-range scale (See datasheet page 33 for more details) */
|
|
uint8_t Interrupt_cfg; /* Interrupt configuration (See datasheet page 35 for more details) */
|
|
uint8_t User_ctl; /* User control settings (See datasheet page 41 for more details) */
|
|
uint8_t Pwr_mgmt_clk; /* Power management and clock selection (See datasheet page 32 for more details) */
|
|
} PIOS_IMU3000_ConfigTypeDef;
|
|
|
|
/* Local Variables */
|
|
|
|
static void PIOS_IMU3000_Config(PIOS_IMU3000_ConfigTypeDef * IMU3000_Config_Struct);
|
|
static int32_t PIOS_IMU3000_Read(uint8_t address, uint8_t * buffer, uint8_t len);
|
|
static int32_t PIOS_IMU3000_Write(uint8_t address, uint8_t buffer);
|
|
int32_t imu3000_id = 0;
|
|
|
|
/**
|
|
* @brief Initialize the IMU3000 3-axis gyro sensor.
|
|
* @return none
|
|
*/
|
|
void PIOS_IMU3000_Init(const struct pios_imu3000_cfg * cfg)
|
|
{
|
|
/* Configure EOC pin as input floating */
|
|
GPIO_Init(cfg->drdy.gpio, &cfg->drdy.init);
|
|
|
|
/* Configure the End Of Conversion (EOC) interrupt */
|
|
SYSCFG_EXTILineConfig(cfg->eoc_exti.port_source, cfg->eoc_exti.pin_source);
|
|
EXTI_Init(&cfg->eoc_exti.init);
|
|
|
|
/* Enable and set EOC EXTI Interrupt to the lowest priority */
|
|
NVIC_Init(&cfg->eoc_irq.init);
|
|
|
|
/* Configure the IMU3000 Sensor */
|
|
PIOS_IMU3000_ConfigTypeDef IMU3000_InitStructure;
|
|
IMU3000_InitStructure.Fifo_store = PIOS_IMU3000_FIFO_TEMP_OUT | PIOS_IMU3000_FIFO_GYRO_X_OUT |
|
|
PIOS_IMU3000_FIFO_GYRO_Y_OUT | PIOS_IMU3000_FIFO_GYRO_Z_OUT | PIOS_IMU3000_FIFO_FOOTER;
|
|
IMU3000_InitStructure.Smpl_rate_div = 8;
|
|
IMU3000_InitStructure.DigLPF_Scale = PIOS_IMU3000_LOWPASS_256_HZ | PIOS_IMU3000_SCALE_500_DEG;
|
|
IMU3000_InitStructure.Interrupt_cfg = PIOS_IMU3000_INT_CLR_ANYRD | PIOS_IMU3000_INT_DATA_RDY;
|
|
IMU3000_InitStructure.User_ctl = PIOS_IMU3000_USERCTL_FIFO_EN;
|
|
IMU3000_InitStructure.Pwr_mgmt_clk = PIOS_IMU3000_PWRMGMT_PLL_X_CLK;
|
|
PIOS_IMU3000_Config(&IMU3000_InitStructure);
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize the IMU3000 3-axis gyro sensor
|
|
* \return none
|
|
* \param[in] PIOS_IMU3000_ConfigTypeDef struct to be used to configure sensor.
|
|
*
|
|
*/
|
|
static void PIOS_IMU3000_Config(PIOS_IMU3000_ConfigTypeDef * IMU3000_Config_Struct)
|
|
{
|
|
// TODO: Add checks against current config so we only update what has changed
|
|
|
|
// FIFO storage
|
|
while (PIOS_IMU3000_Write(PIOS_IMU3000_FIFO_EN_REG, IMU3000_Config_Struct->Fifo_store) != 0);
|
|
|
|
// Sample rate divider
|
|
while (PIOS_IMU3000_Write(PIOS_IMU3000_SMPLRT_DIV_REG, IMU3000_Config_Struct->Smpl_rate_div) != 0) ;
|
|
|
|
// Digital low-pass filter and scale
|
|
while (PIOS_IMU3000_Write(PIOS_IMU3000_DLPF_CFG_REG, IMU3000_Config_Struct->DigLPF_Scale) != 0) ;
|
|
|
|
// Interrupt configuration
|
|
while (PIOS_IMU3000_Write(PIOS_IMU3000_INT_CFG_REG, IMU3000_Config_Struct->Interrupt_cfg) != 0) ;
|
|
|
|
// Interrupt configuration
|
|
while (PIOS_IMU3000_Write(PIOS_IMU3000_USER_CTRL_REG, IMU3000_Config_Struct->User_ctl) != 0) ;
|
|
|
|
// Interrupt configuration
|
|
while (PIOS_IMU3000_Write(PIOS_IMU3000_PWR_MGMT_REG, IMU3000_Config_Struct->Pwr_mgmt_clk) != 0) ;
|
|
}
|
|
|
|
/**
|
|
* @brief Read current X, Z, Y values (in that order)
|
|
* \param[out] int16_t array of size 3 to store X, Z, and Y magnetometer readings
|
|
* \returns The number of samples remaining in the fifo
|
|
*/
|
|
int32_t PIOS_IMU3000_ReadGyros(int16_t * data)
|
|
{
|
|
uint8_t buf[6];
|
|
if(PIOS_IMU3000_Read(PIOS_IMU3000_GYRO_X_OUT_MSB, (uint8_t *) buf, sizeof(buf)) < 0)
|
|
return -1;
|
|
data[0] = buf[0] << 8 | buf[1];
|
|
data[1] = buf[2] << 8 | buf[3];
|
|
data[2] = buf[4] << 8 | buf[5];
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Read the identification bytes from the IMU3000 sensor
|
|
* \return ID read from IMU3000 or -1 if failure
|
|
*/
|
|
int32_t PIOS_IMU3000_ReadID()
|
|
{
|
|
uint8_t id;
|
|
if(PIOS_IMU3000_Read(0x00, (uint8_t *) &imu3000_id, 1) != 0)
|
|
return -1;
|
|
id = imu3000_id;
|
|
return id;
|
|
}
|
|
|
|
/**
|
|
* @brief Reads the data from the IMU3000 FIFO
|
|
* \param[out] buffer destination buffer
|
|
* \param[in] len maximum number of bytes which should be read
|
|
* \return number of bytes transferred if operation was successful
|
|
* \return -1 if error during I2C transfer
|
|
*/
|
|
int32_t PIOS_IMU3000_ReadFifo(uint8_t * buffer, uint16_t len)
|
|
{
|
|
uint16_t fifo_level;
|
|
|
|
uint8_t addr_buffer[] = {
|
|
0x3A,
|
|
};
|
|
|
|
|
|
const struct pios_i2c_txn txn_list[] = {
|
|
{
|
|
.info = __func__,
|
|
.addr = PIOS_IMU3000_I2C_ADDR,
|
|
.rw = PIOS_I2C_TXN_WRITE,
|
|
.len = sizeof(addr_buffer),
|
|
.buf = addr_buffer,
|
|
}
|
|
,
|
|
{
|
|
.info = __func__,
|
|
.addr = PIOS_IMU3000_I2C_ADDR,
|
|
.rw = PIOS_I2C_TXN_READ,
|
|
.len = 2,
|
|
.buf = (uint8_t *) &fifo_level,
|
|
}
|
|
};
|
|
|
|
// Get the number of bytes in the fifo
|
|
PIOS_I2C_Transfer(PIOS_I2C_GYRO_ADAPTER, txn_list, NELEMENTS(txn_list));
|
|
addr_buffer[0] = 0x3C;
|
|
|
|
|
|
if(len > fifo_level)
|
|
len = fifo_level;
|
|
len &= 0x01f8; // only read chunks of 8 bytes (includes footer)
|
|
|
|
const struct pios_i2c_txn txn_list2[] = {
|
|
{
|
|
.info = __func__,
|
|
.addr = PIOS_IMU3000_I2C_ADDR,
|
|
.rw = PIOS_I2C_TXN_WRITE,
|
|
.len = sizeof(addr_buffer),
|
|
.buf = addr_buffer,
|
|
}
|
|
,
|
|
{
|
|
.info = __func__,
|
|
.addr = PIOS_IMU3000_I2C_ADDR,
|
|
.rw = PIOS_I2C_TXN_READ,
|
|
.len = len,
|
|
.buf = buffer,
|
|
}
|
|
};
|
|
return PIOS_I2C_Transfer(PIOS_I2C_GYRO_ADAPTER, txn_list2, NELEMENTS(txn_list)) ? len : -1;
|
|
}
|
|
|
|
/**
|
|
* @brief Reads one or more bytes from IMU3000 into a buffer
|
|
* \param[in] address IMU3000 register address (depends on size)
|
|
* \param[out] buffer destination buffer
|
|
* \param[in] len number of bytes which should be read
|
|
* \return 0 if operation was successful
|
|
* \return -1 if error during I2C transfer
|
|
* \return -4 if invalid length
|
|
*/
|
|
static int32_t PIOS_IMU3000_Read(uint8_t address, uint8_t * buffer, uint8_t len)
|
|
{
|
|
uint8_t addr_buffer[] = {
|
|
address,
|
|
};
|
|
|
|
const struct pios_i2c_txn txn_list[] = {
|
|
{
|
|
.info = __func__,
|
|
.addr = PIOS_IMU3000_I2C_ADDR,
|
|
.rw = PIOS_I2C_TXN_WRITE,
|
|
.len = sizeof(addr_buffer),
|
|
.buf = addr_buffer,
|
|
}
|
|
,
|
|
{
|
|
.info = __func__,
|
|
.addr = PIOS_IMU3000_I2C_ADDR,
|
|
.rw = PIOS_I2C_TXN_READ,
|
|
.len = len,
|
|
.buf = buffer,
|
|
}
|
|
};
|
|
|
|
return PIOS_I2C_Transfer(PIOS_I2C_GYRO_ADAPTER, txn_list, NELEMENTS(txn_list)) ? 0 : -1;
|
|
}
|
|
|
|
/**
|
|
* @brief Writes one or more bytes to the IMU3000
|
|
* \param[in] address Register address
|
|
* \param[in] buffer source buffer
|
|
* \return 0 if operation was successful
|
|
* \return -1 if error during I2C transfer
|
|
*/
|
|
static int32_t PIOS_IMU3000_Write(uint8_t address, uint8_t buffer)
|
|
{
|
|
uint8_t data[] = {
|
|
address,
|
|
buffer,
|
|
};
|
|
|
|
const struct pios_i2c_txn txn_list[] = {
|
|
{
|
|
.info = __func__,
|
|
.addr = PIOS_IMU3000_I2C_ADDR,
|
|
.rw = PIOS_I2C_TXN_WRITE,
|
|
.len = sizeof(data),
|
|
.buf = data,
|
|
}
|
|
,
|
|
};
|
|
|
|
return PIOS_I2C_Transfer(PIOS_I2C_GYRO_ADAPTER, txn_list, NELEMENTS(txn_list)) ? 0 : -1;
|
|
}
|
|
|
|
/**
|
|
* @brief Run self-test operation.
|
|
* \return 0 if test succeeded
|
|
* \return non-zero value if test succeeded
|
|
*/
|
|
uint8_t PIOS_IMU3000_Test(void)
|
|
{
|
|
/* Verify that ID matches (IMU3000 ID is 0x69) */
|
|
int32_t id = 0;
|
|
id = PIOS_IMU3000_ReadID();
|
|
if(id < 0)
|
|
return -1;
|
|
|
|
if(id != PIOS_IMU3000_I2C_ADDR)
|
|
return -2;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @brief IRQ Handler
|
|
*/
|
|
void PIOS_IMU3000_IRQHandler(void)
|
|
{
|
|
}
|
|
|
|
/**
|
|
* The physical IRQ handler
|
|
* Soon this will be generic in pios_exti and the BMA180 will register
|
|
* against it. Right now this is crap!
|
|
*/
|
|
void EXTI1_IRQHandler(void)
|
|
{
|
|
if (EXTI_GetITStatus(EXTI_Line1) != RESET)
|
|
{
|
|
PIOS_IMU3000_IRQHandler();
|
|
EXTI_ClearITPendingBit(EXTI_Line1);
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @}
|
|
*/
|