mirror of
https://bitbucket.org/librepilot/librepilot.git
synced 2024-12-02 10:24:11 +01:00
f886af186d
After 3 failed warm start attempts, the init sequence
will force the RAM version of the HWSettings object
to its defaults. This should allow a user to regain
connectivity to a board that is continually faulting
during init.
This is accomplished by:
- Incrementing a boot counter that is stored in the
STM32 BKP registers. These registers survive a
warm start but are cleared on a cold start (ie. powerup).
- On multiple failures, force hwsettings to defaults
and raise the (new) BootFault alarm to prevent arming.
- Resetting the boot counter whenever the system manages
to successfully run the System Module task.
NOTE: This does not actually change the hwsettings object in
flash. That's up to the user.
This is intended to catch ONLY faults during early initialization.
It should not be used to recover from faults after the application
is up and running.
|
||
|---|---|---|
| .. | ||
| Actuator | ||
| AHRSComms | ||
| Altitude | ||
| Attitude | ||
| Battery | ||
| CameraStab | ||
| ComUsbBridge | ||
| Example | ||
| FirmwareIAP | ||
| FlightPlan | ||
| GPS | ||
| Guidance | ||
| ManualControl | ||
| MK/MKSerial | ||
| Osd/OsdEtStd | ||
| Stabilization | ||
| System | ||
| Telemetry | ||