Brian Webb f8d60e6dee OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.

2013-06-26 17:58:02 -07:00

..

libraries

OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.

2013-06-26 17:56:56 -07:00

modules

OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.

2013-06-26 17:58:02 -07:00

pios

Fixes the 9600 bps air datarate for the RFM33B modem.

2013-06-26 17:57:46 -07:00

Project

Update Windows USB driver file

2013-06-03 16:39:41 +03:00

targets

OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.

2013-06-26 17:57:11 -07:00

templates

OP-770: add/rename some version-info.py template variables

2013-05-25 23:02:29 +02:00

tests/logfs

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

uavobjects

Bugfix in UAVObjectmanager. LoadFromFile() is not allowed to use GetByID since its called from Register, where the uavobject is not registered yet.

2013-06-06 21:22:17 +02:00

uavtalk

OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.

2013-06-26 17:58:02 -07:00

.gitattributes

Update flight/.gitattributes to include *.template files

2013-04-30 22:15:58 +02:00