Local Authentication Using Challenge Response
---------------------------------------------

The PAM module can utilize the HMAC-SHA1 Challenge-Response mode found
in YubiKeys starting with version 2.2 for offline authentication.
This mode is useful if you don't have a stable network connection to
the YubiCloud.

The ykpamcfg utility currently outputs the state information to a file
in the current user's home directory (`$HOME/.yubico/challenge-123456`
for a YubiKey with serial number API readout enabled, and
`$HOME/.yubico/challenge` for one without).

The PAM module supports a system wide directory for these state files
(in case the user's home directories are encrypted), but in a system
wide directory, the 'challenge' part should be replaced with the
username.  Example: `/var/yubico/challenges/alice-123456`.

To use the system-wide mode, you currently have to move the generated
state files manually and configure the PAM module accordingly.

The following process is tested on Ubuntu 12.04.

First install the package:

------
$ sudo apt-get install libpam-yubico
------

You will get a question about the PAM configuration line.  Enter this
line:

------
mode=challenge-response
------

The next question will be about which PAM modules to enable.  Don't
enable anything just yet, because you need to program your YubiKey
first.

If you have already installed the package or want to reconfigure it,
you may use this command:

------
$ sudo dpkg-reconfigure libpam-yubico
------

The next step is to add a challenge-response slot to your YubiKey.  If
you have a normal YubiKey with OTP functionality on the first slot,
you could add Challenge-Response on the second slot.  You could have
CR on the first slot, if you want.

First, program a YubiKey for challenge response on Slot 2:

------
$ ykpersonalize -2 -ochal-resp -ochal-hmac -ohmac-lt64 -oserial-api-visible
...
Commit? (y/n) [n]: y
$
------

Now, set the current user to require this YubiKey for logon:

------
$ mkdir $HOME/.yubico
$ ykpamcfg -2 -v
...
Stored initial challenge and expected response in '/home/alice/.yubico/challenge-123456'.
$
------
If your /home/user folder is encrypted you should move the challenge file in a different path (i.e. /etc/yubico) and then set the right permission for the user to create the files. To do this do as follow:

----
$ mkdir /etc/yubico
$ chmod +t /etc/yubico
$ chmod 777 /etc/yubico
$ mv /home/user/.yubico/challenge-####### /etc/yubico/username-#######
...
It is important that you name the file with the username of the user that is going to use the Yubikey
----
Finally we tell the pam module where to look for the challenge file

 $ emacs /etc/pam.d/common-auth

and edit the following line as follow:

 auth	required	pam_yubico.so mode=challenge-response chalresp_path=/etc/yubico

Then back to the PAM configuration step, first make sure you have a
root terminal available to be able to disable YubiKey login in case of
issues.

 $ sudo -s

Then run the "pam-auth-update" command and enable the Yubico PAM
module.

 $ sudo pam-auth-update

You should now be able to authenticate using YubiKey
Challenge-Reseponse together with a password like this:

----
jas@latte:~$ sudo -s
[sudo] password for jas: 
root@latte:~# 
----

Now remove the YubiKey and try again (in a new terminal to avoid sudo
caching), and you should not be able to login.

For debugging, you can make the PAM configuration line:

 mode=challenge-response debug

and then create a log file:

----
# touch /var/run/pam-debug.log
# chmod go+w /var/run/pam-debug.log
----

and then tail the file.  For successful logins it should print
something like this:

----
[pam_yubico.c:parse_cfg(721)] called.
[pam_yubico.c:parse_cfg(722)] flags 32768 argc 2
[pam_yubico.c:parse_cfg(724)] argv[0]=mode=challenge-response
[pam_yubico.c:parse_cfg(724)] argv[1]=debug
[pam_yubico.c:parse_cfg(725)] id=-1
[pam_yubico.c:parse_cfg(726)] key=(null)
[pam_yubico.c:parse_cfg(727)] debug=1
[pam_yubico.c:parse_cfg(728)] alwaysok=0
[pam_yubico.c:parse_cfg(729)] verbose_otp=0
[pam_yubico.c:parse_cfg(730)] try_first_pass=0
[pam_yubico.c:parse_cfg(731)] use_first_pass=0
[pam_yubico.c:parse_cfg(732)] authfile=(null)
[pam_yubico.c:parse_cfg(733)] ldapserver=(null)
[pam_yubico.c:parse_cfg(734)] ldap_uri=(null)
[pam_yubico.c:parse_cfg(735)] ldapdn=(null)
[pam_yubico.c:parse_cfg(736)] user_attr=(null)
[pam_yubico.c:parse_cfg(737)] yubi_attr=(null)
[pam_yubico.c:parse_cfg(738)] yubi_attr_prefix=(null)
[pam_yubico.c:parse_cfg(739)] url=(null)
[pam_yubico.c:parse_cfg(740)] capath=(null)
[pam_yubico.c:parse_cfg(741)] token_id_length=12
[pam_yubico.c:parse_cfg(742)] mode=chresp
[pam_yubico.c:parse_cfg(743)] chalresp_path=(null)
[pam_yubico.c:pam_sm_authenticate(775)] get user returned: jas
[pam_yubico.c:do_challenge_response(493)] Loading challenge from file /home/jas/.yubico/challenge-1077187
[util.c:load_chalresp_state(269)] Challenge: 23001a190724abf46c8022b008ccb65673dd634ecb150613771ec87f37850284d80dd5f8c8e56affb6da2e952b16682160e7f3ac4f816b64126bd9556e5be1, response: 63d4a679ed15335ffd4253e7609963bcdb0834d4, slot: 2
[pam_yubico.c:do_challenge_response(566)] Got the expected response, generating new challenge (63 bytes).
[pam_yubico.c:do_challenge_response(629)] Challenge-response success!
----

and if there is no YubiKey in the machine it will look like this:

----
[pam_yubico.c:parse_cfg(721)] called.
[pam_yubico.c:parse_cfg(722)] flags 32768 argc 2
[pam_yubico.c:parse_cfg(724)] argv[0]=mode=challenge-response
[pam_yubico.c:parse_cfg(724)] argv[1]=debug
[pam_yubico.c:parse_cfg(725)] id=-1
[pam_yubico.c:parse_cfg(726)] key=(null)
[pam_yubico.c:parse_cfg(727)] debug=1
[pam_yubico.c:parse_cfg(728)] alwaysok=0
[pam_yubico.c:parse_cfg(729)] verbose_otp=0
[pam_yubico.c:parse_cfg(730)] try_first_pass=0
[pam_yubico.c:parse_cfg(731)] use_first_pass=0
[pam_yubico.c:parse_cfg(732)] authfile=(null)
[pam_yubico.c:parse_cfg(733)] ldapserver=(null)
[pam_yubico.c:parse_cfg(734)] ldap_uri=(null)
[pam_yubico.c:parse_cfg(735)] ldapdn=(null)
[pam_yubico.c:parse_cfg(736)] user_attr=(null)
[pam_yubico.c:parse_cfg(737)] yubi_attr=(null)
[pam_yubico.c:parse_cfg(738)] yubi_attr_prefix=(null)
[pam_yubico.c:parse_cfg(739)] url=(null)
[pam_yubico.c:parse_cfg(740)] capath=(null)
[pam_yubico.c:parse_cfg(741)] token_id_length=12
[pam_yubico.c:parse_cfg(742)] mode=chresp
[pam_yubico.c:parse_cfg(743)] chalresp_path=(null)
[pam_yubico.c:pam_sm_authenticate(775)] get user returned: jas
[pam_yubico.c:do_challenge_response(478)] Failed initializing YubiKey
[pam_yubico.c:do_challenge_response(640)] Yubikey core error: no yubikey present
----