mirror of
https://github.com/arduino/Arduino.git
synced 2024-11-30 11:24:12 +01:00
e81c1123b6
Optiboot does not support ArduinoasISP programmer. When avrdude runs and talks to an arduino running ArduinoISP, it needs the optiboot (entered due to auto-reset) to abort and start the ArduinoISP "application" when it sees communications at the wrong serial speed. Unfortunately, optiboot treats all unrecognized command characters as "no-ops" and responds/loops for more commands, leading to a nice loop that never gets to the sketch. This patch causes characters received with Framing errors (the most likely error for speed mis-matches) to NOT reset the watchdog timer (normally done in getch()), which will cause the application to start if it continues for "a while." (tested. Works! Running ArduinoISP at speeds as high as 57600 still causes the bootloader to start the sketch (although it fails later on for other reasons.)) |
||
|---|---|---|
| .settings | ||
| app | ||
| build | ||
| core | ||
| hardware/arduino | ||
| libraries | ||
| .classpath | ||
| .project | ||
| license.txt | ||
| readme.txt | ||
| todo.txt | ||
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The boards can be assembled by hand or purchased preassembled; the open-source IDE can be downloaded for free. For more information, see the website at: http://www.arduino.cc/ or the forums at: http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl To report a bug or a make a suggestions, go to: [hardware] http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?board=hwbugs [software] http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?board=swbugs INSTALLATION Detailed instructions are in reference/Guide_Windows.html and reference/Guide_MacOSX.html. For Linux, see the Arduino playground: http://www.arduino.cc/playground/Learning/Linux If you are using a USB Arduino, you will need to install the drivers for the FTDI chip on the board. These can be found in the drivers/ directory. * On Windows, plug in the Arduino board and point the Windows Add Hardware wizard to the drivers/FTDI USB Drivers sub-directory of the Arduino application directory. * On the Mac, install the FTDIUSBSerialDriver_10_4_10_5_10_6.mpkg package. * On Linux, drivers are included in kernel versions 2.4.20 or greater. CREDITS Arduino is an open source project, supported by many. The Arduino team is composed of Massimo Banzi, David Cuartielles, Tom Igoe, Gianluca Martino, and David A. Mellis. Arduino uses the GNU avr-gcc toolchain, avrdude, avr-libc, and code from Processing and Wiring. Icon designed by ToDo: http://www.todo.to.it/ "About" image created by Thomas Glaser (envis precisely).