rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-02-24 13:54:16 +01:00
Code Issues Releases Activity

Merge branch 'master' into OP-320_Erase_all_settings

Browse Source
This commit is contained in:
elafargue 2011-04-28 16:25:36 +02:00
commit 2a2fc1d2a4
23 changed files with 54 additions and 352 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
flight/AHRS/Makefile
View File

@ -305,39 +305,16 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OPENOCDEXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.ahrs.osx.cfg -f ../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.ahrs.cfg -f ../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
# reset target # reset target
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

27
flight/Bootloaders/AHRS/Makefile
View File

@ -291,31 +291,8 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OPENOCDEXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.ahrs.osx.cfg -f ../../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.ahrs.cfg -f ../../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -323,8 +300,6 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

28
flight/Bootloaders/BootloaderUpdater/Makefile
View File

@ -330,32 +330,8 @@ else
quote = quote =
endif endif
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OOCD_EXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.osx.cfg -f ../../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.cfg -f ../../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -363,8 +339,6 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
CC = $(TCHAIN_PREFIX)gcc CC = $(TCHAIN_PREFIX)gcc

27
flight/Bootloaders/CopterControl/Makefile
View File

@ -370,31 +370,8 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OOCD_EXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.osx.cfg -f ../../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.cfg -f ../../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -402,8 +379,6 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

27
flight/Bootloaders/OpenPilot/Makefile
View File

@ -371,31 +371,8 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OOCD_EXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.osx.cfg -f ../../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.cfg -f ../../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -403,8 +380,6 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

27
flight/Bootloaders/PipXtreme/Makefile
View File

@ -370,31 +370,8 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_stm32f10x_$(MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OOCD_EXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.osx.cfg -f ../../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../../Project/OpenOCD/floss-jtag.openpilot.cfg -f ../../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -402,8 +379,6 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

26
flight/CopterControl/Makefile
View File

@ -478,31 +478,8 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OOCD_EXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.openpilot.osx.cfg -f ../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.openpilot.cfg -f ../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -510,7 +487,6 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

28
flight/INS/Makefile
View File

@ -313,39 +313,15 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OPENOCDEXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.openpilot.osx.cfg -f ../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.openpilot.cfg -f ../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
# reset target # reset target
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

27
flight/OpenPilot/Makefile
View File

@ -460,31 +460,8 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OOCD_EXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.openpilot.osx.cfg -f ../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.openpilot.cfg -f ../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -492,7 +469,7 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

27
flight/PipXtreme/Makefile
View File

@ -349,31 +349,8 @@ LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name # Set linker-script name depending on selected submodel name
LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld LDFLAGS +=-T$(LINKERSCRIPTPATH)/link_$(BOARD)_$(BOOT_MODEL).ld
# ---------------------------------------------------------------------------
# Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
#
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OPENOCDEXE=openocd # Program
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
UNAME := $(shell uname)
ifeq ($(UNAME), Darwin)
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.pipxtreme.osx.cfg -f ../Project/OpenOCD/stm32.cfg
else
OOCD_CL+=-f ../Project/OpenOCD/floss-jtag.pipxtreme.cfg -f ../Project/OpenOCD/stm32.cfg
endif
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write
OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)" OOCD_CL+=-c "flash write_image $(OOCD_LOADFILE)"
# Verify # Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)" OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
@ -381,8 +358,6 @@ OOCD_CL+=-c "verify_image $(OOCD_LOADFILE)"
OOCD_CL+=-c "reset run" OOCD_CL+=-c "reset run"
# terminate OOCD after programming # terminate OOCD after programming
OOCD_CL+=-c shutdown OOCD_CL+=-c shutdown
# ---------------------------------------------------------------------------
# Define programs and commands. # Define programs and commands.
REMOVE = $(REMOVE_CMD) -f REMOVE = $(REMOVE_CMD) -f

15
flight/Project/OpenOCD/floss-jtag.ahrs.cfg
View File

@ -1,15 +0,0 @@
#
# Floss JTAG for AHRS
#
interface ft2232
ft2232_vid_pid 0x0403 0x6010
ft2232_device_desc "Dual RS232-HS"
#ft2232_bus_addr "002:103"
#ft2232_serial "1234567890"
ft2232_layout "usbjtag"
ft2232_latency 2
gdb_port 3334
tcl_port 6667
telnet_port 4445

15
flight/Project/OpenOCD/floss-jtag.openpilot.cfg
View File

@ -1,15 +0,0 @@
#
# Floss JTAG OpenPilot
#
interface ft2232
ft2232_vid_pid 0x0403 0x6010
ft2232_device_desc "Dual RS232-HS"
#ft2232_bus_addr "002:088"
#ft2232_serial "1234567890"
ft2232_layout "usbjtag"
ft2232_latency 2
gdb_port 3333
tcl_port 6666
telnet_port 4444

15
flight/Project/OpenOCD/floss-jtag.openpilot.osx.cfg
View File

@ -1,15 +0,0 @@
#
# Floss JTAG OpenPilot
#
interface ft2232
ft2232_vid_pid 0x0403 0x6010
#ft2232_device_desc "Dual RS232-HS"
#ft2232_bus_addr "002:088"
#ft2232_serial "1234567890"
ft2232_layout "usbjtag"
ft2232_latency 2
gdb_port 3333
tcl_port 6666
telnet_port 4444

15
flight/Project/OpenOCD/floss-jtag.pipxtreme.cfg
View File

@ -1,15 +0,0 @@
#
# Floss JTAG for AHRS
#
interface ft2232
ft2232_vid_pid 0x0403 0x6010
ft2232_device_desc "Dual RS232-HS"
#ft2232_bus_addr "002:103"
#ft2232_serial "1234567890"
ft2232_layout "usbjtag"
ft2232_latency 2
gdb_port 3334
tcl_port 6667
telnet_port 4445

15
flight/Project/OpenOCD/floss-jtag.pipxtreme.osx.cfg
View File

@ -1,15 +0,0 @@
#
# Floss JTAG OpenPilot
#
interface ft2232
ft2232_vid_pid 0x0403 0x6010
#ft2232_device_desc "Dual RS232-HS"
#ft2232_bus_addr "002:088"
#ft2232_serial "1234567890"
ft2232_layout "usbjtag"
ft2232_latency 2
gdb_port 3334
tcl_port 6666
telnet_port 4444

0
flight/Project/OpenOCD/floss-jtag.cfg → flight/Project/OpenOCD/floss-jtag.reva.cfg
View File

0
flight/Project/OpenOCD/floss-jtag.ahrs.osx.cfg → flight/Project/OpenOCD/foss-jtag.revb.ahrs.cfg
View File

0
flight/Project/OpenOCD/floss-jtag-revb.cfg → flight/Project/OpenOCD/foss-jtag.revb.cfg
View File

2
flight/Project/gdb/pipx
View File

@ -1,5 +1,5 @@
define connect define connect
target remote localhost:3334 target remote localhost:3333
monitor cortex_m3 vector_catch all monitor cortex_m3 vector_catch all
file ./Build/PipXtreme.elf file ./Build/PipXtreme.elf
end end

BIN
hardware/Production/FOSS JTAG/BOM/FOSS JTAG BOM.xls
View File

Binary file not shown.

BIN
hardware/Production/FOSS JTAG/FOSS JTAG Schematic.pdf
View File

Binary file not shown.

BIN
hardware/Production/FOSS JTAG/FOSS JTAG.SchDoc
View File

Binary file not shown.

22
make/firmware-defs.mk
View File

@ -143,3 +143,25 @@ $($(1):.c=.s) : %.s : %.c
$(V1) $(CC) -S $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@ $(V1) $(CC) -S $$(CFLAGS) $$(CONLYFLAGS) $$< -o $$@
endef endef
# ---------------------------------------------------------------------------
# # Options for OpenOCD flash-programming
# see openocd.pdf/openocd.texi for further information
# #
# OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).elf
# if OpenOCD is in the $PATH just set OPENOCDEXE=openocd
OOCD_EXE=openocd
# debug level
OOCD_CL=-d0
# interface and board/target settings (using the OOCD target-library here)
OOCD_CL+=-s $(TOP)/flight/Project/OpenOCD
OOCD_CL+=-f foss-jtag.revb.cfg -f stm32.cfg
# initialize
OOCD_CL+=-c init
# show the targets
OOCD_CL+=-c targets
# commands to prepare flash-write
OOCD_CL+= -c "reset halt"
# flash erase
OOCD_CL+=-c "stm32x mass_erase 0"
# flash-write