rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2025-03-01 18:29:16 +01:00
Code Issues Releases Activity

RM: Swap to using the CC_ flags for the flexi port too.

Browse Source
This commit is contained in:
James Cotton 2012-08-31 10:30:00 -05:00
parent 73c7190077
commit d333e24a43
2 changed files with 75 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
flight/RevoMini/System/pios_board.c
View File

@ -460,7 +460,7 @@ void PIOS_Board_Init(void) {
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_CC_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, 0, &pios_usart_com_driver, &pios_com_gps_id);
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_CC_MAINPORT_COMAUX:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
@ -472,13 +472,14 @@ void PIOS_Board_Init(void) {
} /* hwsettings_rv_telemetryport */
/* Configure FlexiPort */
uint8_t hwsettings_rv_flexiport;
HwSettingsRV_FlexiPortGet(&hwsettings_rv_flexiport);
switch (hwsettings_rv_flexiport) {
case HWSETTINGS_RV_FLEXIPORT_DISABLED:
uint8_t hwsettings_flexiport;
HwSettingsCC_FlexiPortGet(&hwsettings_flexiport);
// Disable, Telemetry, GPS, S.Bus, DSM (2,X10,X11), ComAux, ComBridge
switch (hwsettings_flexiport) {
case HWSETTINGS_CC_FLEXIPORT_DISABLED:
break;
case HWSETTINGS_RV_FLEXIPORT_I2C:
case HWSETTINGS_CC_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
@ -487,13 +488,15 @@ void PIOS_Board_Init(void) {
}
#endif /* PIOS_INCLUDE_I2C */
break;
case HWSETTINGS_RV_FLEXIPORT_DSM2:
case HWSETTINGS_RV_FLEXIPORT_DSMX10BIT:
case HWSETTINGS_RV_FLEXIPORT_DSMX11BIT:
case HWSETTINGS_CC_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, -1, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_CC_FLEXIPORT_DSM2:
case HWSETTINGS_CC_FLEXIPORT_DSMX10BIT:
case HWSETTINGS_CC_FLEXIPORT_DSMX11BIT:
{
enum pios_dsm_proto proto;
switch (hwsettings_rv_flexiport) {
switch (hwsettings_flexiport) {
case HWSETTINGS_RV_FLEXIPORT_DSM2:
proto = PIOS_DSM_PROTO_DSM2;
break;
@ -512,10 +515,10 @@ void PIOS_Board_Init(void) {
&pios_usart_com_driver, &proto, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT,&hwsettings_DSMxBind);
}
break;
case HWSETTINGS_RV_FLEXIPORT_COMAUX:
case HWSETTINGS_CC_FLEXIPORT_COMAUX:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_AUX_RX_BUF_LEN, PIOS_COM_AUX_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_aux_id);
break;
case HWSETTINGS_RV_FLEXIPORT_COMBRIDGE:
case HWSETTINGS_CC_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
} /* hwsettings_rv_flexiport */

58
flight/board_hw_defs/revomini/board_hw_defs.c
View File

@ -414,6 +414,64 @@ static const struct pios_usart_cfg pios_usart_main_cfg = {
};
#endif /* PIOS_INCLUDE_COM_TELEM */
#if defined(PIOS_INCLUDE_SBUS)
/*
* S.Bus USART
*/
#include <pios_sbus_priv.h>
static const struct pios_usart_cfg pios_usart_sbus_main_cfg = {
.regs = USART1,
.init = {
.USART_BaudRate = 100000,
.USART_WordLength = USART_WordLength_8b,
.USART_Parity = USART_Parity_Even,
.USART_StopBits = USART_StopBits_2,
.USART_HardwareFlowControl = USART_HardwareFlowControl_None,
.USART_Mode = USART_Mode_Rx,
},
.irq = {
.init = {
.NVIC_IRQChannel = USART1_IRQn,
.NVIC_IRQChannelPreemptionPriority = PIOS_IRQ_PRIO_HIGH,
.NVIC_IRQChannelSubPriority = 0,
.NVIC_IRQChannelCmd = ENABLE,
},
},
.rx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_10,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IPU,
},
},
.tx = {
.gpio = GPIOA,
.init = {
.GPIO_Pin = GPIO_Pin_9,
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN_FLOATING,
},
},
};
static const struct pios_sbus_cfg pios_sbus_cfg = {
/* Inverter configuration */
.inv = {
.gpio = GPIOC,
.init = {
.GPIO_Pin = GPIO_Pin_0,
.GPIO_Mode = GPIO_Mode_Out_PP,
.GPIO_Speed = GPIO_Speed_2MHz,
},
},
.gpio_clk_func = RCC_APB2PeriphClockCmd,
.gpio_clk_periph = RCC_APB2Periph_GPIOC,
.gpio_inv_enable = Bit_SET,
};
#endif /* PIOS_INCLUDE_SBUS */
#ifdef PIOS_INCLUDE_COM_FLEXI
/*