Karl Knutsson
|
137c183ec2
|
OP-1522 Remove unused channel set cfg
Remove unused channel set configuration option.
With the new channel allocation the old channel set
configuration isn't needed.
|
2015-02-02 21:25:38 +01:00 |
|
Karl Knutsson
|
b0491da115
|
OP-1576: Remove unused tx_resent counter
Remove unused tx_resent counter and replace it with
rx_failure in link quality calculations.
|
2015-02-02 21:25:38 +01:00 |
|
Brian Webb
|
491e5fe685
|
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
|
2013-06-29 15:00:38 -07:00 |
|
Brian Webb
|
2aea2342ab
|
OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.
|
2013-06-26 18:01:54 -07:00 |
|
Brian Webb
|
61c453f6ff
|
Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only.
|
2013-06-26 17:59:33 -07:00 |
|
Brian Webb
|
774a74884a
|
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
|
2013-06-26 17:57:11 -07:00 |
|
Brian Webb
|
8c370df319
|
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
|
2013-06-26 17:56:56 -07:00 |
|
Brian Webb
|
ac4847c8ac
|
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
|
2013-05-21 19:48:21 -07:00 |
|
Sexy Pony
|
900f643bbd
|
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
|
2013-05-19 17:37:30 +03:00 |
|
Brian Webb
|
ef18319306
|
OP-932: Continued cleanup and modularization of the RFM22B radio code. Low-level radio driver has mostly been split out of the higher-level state machine.
|
2013-05-01 03:14:23 +01:00 |
|
Brian Webb
|
94cb92f410
|
OP-932: Additional restructuring of radio code.
|
2013-05-01 03:14:11 +01:00 |
|
Brian Webb
|
a9079bfb7e
|
OP-914: Additional cleanup of the RFM22B driver code. Updated to code to the current coding standard. Added Doxygen documentation. Rearranged functions into functional groups to simplify reading the code.
|
2013-04-27 01:44:55 +01:00 |
|
Oleg Semyonov
|
b6e1331e5d
|
Rename flight/PiOS->flight/pios
|
2013-04-25 13:13:41 +03:00 |
|