Alessio Morale
59eaf01089
OP-990 Change initial delay before calibration to 4 seconds to allow to put the craft on the ground after battery connection
...
+review OPReview-505
2013-06-09 08:59:35 +02:00
Alessio Morale
7a6b5c5681
OP-990 Fixed the main cause of wrong bias calculation:
...
The initial bias calculation done between 1 and 7 seconds
since power on was completely skipped due to a wrong condition.
2013-06-08 13:10:23 +02:00
Alessio Morale
3ad123718e
Revert "OP-990 zeroed the rollpitch bias rate at startup and incremented at arming."
...
This reverts commit c0b926a2d5
2013-06-08 13:10:23 +02:00
Alessio Morale
c0b926a2d5
OP-990 zeroed the rollpitch bias rate at startup and incremented at arming.
2013-06-05 22:19:20 +02:00
Oleg Semyonov
65c463bf03
Update Windows USB driver file
2013-06-03 16:39:41 +03:00
Richard Flay (Hyper)
8c494dce00
OP-982: Further updates to Strings in response to review feedback.
...
+review OPReview-493
2013-06-02 18:43:37 +09:30
Richard Flay (Hyper)
3e6389d9b6
OP-982: Updates to spacing and Strings in response to review feedback.
...
+review OPReview-493
2013-06-02 18:11:04 +09:30
Richard Flay (Hyper)
35b580a34e
OP-982: Adds Revolution related entries to OpenPilot-CDC.inf for Windows.
...
+review OPReview
2013-06-02 08:44:54 +09:30
Alessio Morale
6b2218d1df
Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next
2013-05-28 18:39:42 +02:00
Alessio Morale
a286a20cb0
OP-925 Changed dT to comply with revo sensor rate
...
+review OPReview-484
2013-05-27 21:05:39 +02:00
Fredrik Arvidsson
d9d2b7d167
Merge remote-tracking branch 'origin/os/OP-770_version_info_stuff' into thread/OP-770_UAV_Export_Version_Info_Fix
2013-05-27 19:30:18 +02:00
Brian Webb
50162333d8
Merge remote-tracking branch 'origin/dankers/minor-modem-renames' into next
2013-05-27 09:44:17 -07:00
Brian Webb
16b787179c
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2013-05-26 08:37:05 -07:00
Brian Webb
e9f83bcc80
Fixes a bug in the rfm22b driver that was reading past the end of the bindings list when receiving a status message. Also adds some formatting changes that came about after doing a make uncrustify_all.
2013-05-26 08:36:38 -07:00
Alessio Morale
9bfce1bcd6
Merge remote-tracking branch 'origin/amorale/OP-925_Cyr_patches_for_revo_cf' into next
2013-05-26 16:18:05 +02:00
David Ankers
69ede538c9
Update date bu just an easy ay to start review +review OPReview-485
2013-05-26 17:50:44 +10:00
David Ankers
2f9c9df736
Increase the size of the USB Descriptor array to take extra char
2013-05-26 17:03:48 +10:00
David Ankers
7a9466bbf9
State in the header which board this is for
2013-05-26 16:12:35 +10:00
David Ankers
f7a9f94a36
Missing file header
2013-05-26 16:09:55 +10:00
David Ankers
a5b856d1bc
Change board description name to OPLink Mini
2013-05-26 16:04:55 +10:00
David Ankers
d5eccea78f
Comment and header renames, change PipX to OPLink Mini
2013-05-26 15:48:02 +10:00
Oleg Semyonov
444431579e
OP-770: add/rename some version-info.py template variables
2013-05-25 23:02:29 +02:00
Brian Webb
4036e95bd5
Merge remote-tracking branch 'origin/next' into OP-932-Modularize_Radio_Driver
2013-05-25 06:56:13 -07:00
Richard Flay (Hyper)
bd538703ea
OP-962: Tweaked C2U_STACK_SIZE_BYTES to be a multiple of 4.
...
+review OPReview-480
2013-05-25 17:10:41 +09:30
Alessio Morale
711f1ad35b
Fix indentation
2013-05-23 00:47:38 +02:00
Alessio Morale
697874b315
Port of OP-754 On Revo. Fixed signs on bias calculation. Added rate zeroing at startup to yaw
2013-05-22 23:17:09 +02:00
Brian Webb
ac4847c8ac
OP-932 Moves the configuration of the com ports on the coordinator OPLink to startup.
2013-05-21 19:48:21 -07:00
Brian Webb
dbce08a151
OP-932 Changes the radio task loop to loop every 1ms, and reduces the tx transmit period back down to 8ms. Also reduces the Tx windows to 1ms for each modem, and reserves the latter half of the Tx window for channel changing.
2013-05-21 17:40:05 -07:00
Alessio Morale
294a295510
Port CF patch from Cyr that filters accel to reduce attitude drift due to vibrations
2013-05-22 00:55:10 +02:00
Alessio Morale
0b5a28f19e
Port OP-754 to Revolution attitude estimation module: subtract GyroBIAS to work on raw value
...
Added MagKp and MagKi to AttitudeSetting UAVO
2013-05-21 23:44:12 +02:00
a*morale
464d2be9f7
Port OP-754 to Revolution attitude estimation module
2013-05-21 22:40:35 +02:00
Brian Webb
d4a4588011
OP-932 Changes the RFM22 frequency hopping to change channels every Tx period. Also increases the Tx clock period from 8ms to 16ms, and adds a check on calculation the the time delta that it doesn't change the previous estimated time delta by too much. If the delta between the current time delta and the previously estimated time delta is too large it could indicate that there was a delay somewhere that makes the calculated time delta inaccurate.
...
Rearanges the packet send priority in the rfm22b driver so that PPM packets are top priority.
2013-05-20 20:49:24 -07:00
Alessio Morale
8e7e7e052a
OP-962 Fix Stack size for ComUSBBridge
...
+review OPReview
2013-05-21 00:45:45 +02:00
Oleg Semyonov
0798d8e330
OP-891: move firmware_info template under flight directory
2013-05-20 01:12:45 +03:00
Brian Webb
649667d338
Addes ifdef PIOS_INCLUDE_WDG around several calls to the wathdog functions for the Revolution firmware (allows you to turn off the watchdog).
2013-05-19 12:56:23 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
ab7af16be3
Merge branch 'amorale/OP-901_lib_udates-usb_fixes' into HEAD
...
Conflicts:
flight/pios/stm32f10x/library.mk
flight/targets/boards/revoproto/firmware/pios_board.c
2013-05-19 15:01:08 +02:00
Alessio Morale
37eabb0931
Pointed type is explicitly used with sizeof when dealing with struct pointers.
...
+review OPReview-474
2013-05-19 12:00:16 +02:00
Alessio Morale
88a39a81d8
Enable ComUsbBridge Optional Module and fix CDC support for RevoProto
2013-05-19 10:07:01 +02:00
Alessio Morale
2e458b5652
OP-901 USB OTG/Device Drivers are not targeted for f103 (they are targeted at f105) so move again to F4 library folder instead of common
2013-05-18 20:53:28 +02:00
Alessio Morale
3ec9447fdc
OP-901 Update CMSIS to r3p2-00rel1
2013-05-18 20:29:06 +02:00
Alessio Morale
e8dc7509f9
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2013-05-18 17:18:48 +02:00
Oleg Semyonov
80ce4fc995
Fix weird error of running python script with extra --verbose option as a part of script name
...
This error of building any EF targets was found on Windows if used with
make V=1 verbose output option. The '--verbose' python script option was
used by the Windows make as a part of python script file name with
'file not found' error. Now it works. Still can't get the cause of that
error, though...
2013-05-18 17:25:26 +03:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
66da2796e0
Merge remote-tracking branch 'origin/amorale/OP-905_revolution_watchdog_next' into next
2013-05-18 15:00:50 +02:00
Alessio Morale
aba64689a6
OP-901 removed stale core_cm3.c file
2013-05-18 14:25:37 +02:00
Alessio Morale
976ad90211
OP-901 Updated F4 CMSIS startup files, Moved USB OTG and USB Device library to common
2013-05-18 14:03:03 +02:00
Alessio Morale
f0c01d0eff
OP-901 Updated F4 StdPeriph Driver Library to V1.1.0
2013-05-18 13:57:45 +02:00
Alessio Morale
448e98b336
OP-901 Updated F1 StdPeriph Driver Library to v3.5.0
2013-05-18 13:55:43 +02:00
Brian Webb
bc4f615c25
Adds setting HSE_VALUE on all F1 targets (should only be necessary if the HSE clock is not 8MHz).
...
Moves the CMSIS system_stm3210x.c from library.mk to the individual Makefiles for the F1 targets. This allows for custom SystemInit functions where necessary.
2013-05-17 22:01:48 -07:00
