pip
88b2d360a3
Various minor changes to do with switch modem mode on the fly but mainly PPM Input decoder (with error/noise detection) is now working
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2992 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-06 18:52:18 +00:00
pip
7317891d39
Slight reorganisation to allow easier continuous data transmission (DATA streaming and PPM streaming) and allow easier total configuration changes on the fly.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2961 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 08:34:44 +00:00
pip
eaea8f28cf
Starting to add continuous streaming modes (DATA and PPM).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2951 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-03 16:32:43 +00:00
pip
d3ea16de99
Updated spectrum scanning code.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2859 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-23 09:30:06 +00:00
pip
60e7665aec
A bug fixed that caused carrier frequency to go way off when setting the modem to one of the Tx-carrier/Tx-spectrum test modes (and back).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2799 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-16 12:32:44 +00:00
pip
ac7cfcc358
Added "Ready-To-Send-Time" parameter adjustment
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2795 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-15 12:57:46 +00:00
stac
967bb9bb9c
pipx: COM device ids are now 32bit not 8bit
...
The COM layer now uses 32bit device ids rather than
8bit. All code that stores these ids must now use
uint32_t to hold them.
Since these 32bit numbers are really just opaque
pointers, it is (reasonably) safe to assume that
they won't be 0. The logic around tracking the
*_previous_com_port could probably be cleaned up
to remove that assumption.
Missed this fixup in the recent hwinit changes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2776 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-13 15:54:26 +00:00
pip
b2eb141c10
100mW appears to be working again. A few bug fixes.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2745 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 21:21:50 +00:00
pip
6559615ef8
Made quite a few constants/#defines capitals (previously lower case)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2743 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-06 10:55:08 +00:00
pip
41768be215
Allows modem mode to be set - BUT NOT YET IMPLIMENTED, use NORMAL mode for now.
...
Fixed bug in pipx plugin import function - wasn't restoring the AES key.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2726 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-04 23:00:48 +00:00
pip
3bad7982dd
Fixed RSSI when no signal received.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2714 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 13:12:30 +00:00
pip
ac5155f3d9
Increased RF packet ping speed if the GCS is monitoring the RSSI.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2712 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 11:31:34 +00:00
pip
0e3ae58c96
New PipX config protocol packets. YOU NEED TO RECOMPILE THE GCS PLUGIN to use this.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2711 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-03 07:05:32 +00:00
pip
7f8b0d5788
Fixed carrier frequency problems.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2700 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 17:53:46 +00:00
pip
40e9a592c8
PipX modem can now be configured from GCS in realtime.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2695 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-02 11:44:23 +00:00
pip
2c3e540637
Code added to allow GCS to configure modem. Not yet finished - modem needs rebooting after uploading new config - for the time being.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2687 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-01 23:40:40 +00:00
