Brian Webb
dc5eef0cb5
LP-499 Adds support for bridging either radio primary, radio auxilary, and/or VCP to any of the output ports (main, flexi, VCP, HID). Also adds the ability to configure the com speed of the UARTs independent of the air data rate.
2017-04-22 09:36:04 -07:00
Brian Webb
aa21761f4c
LP-190: Adds support for OpenLRS protocol to OPLinkMini
2016-07-12 17:47:16 -07:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Corvus Corax
e9d1a2af4b
OP-1309 get rid of this horrible bound() function code duplication throughout entire flight code and put it into libraries/math
2014-04-26 17:48:54 +02:00
Philippe Renon
3b7b06aad0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-04-09 09:11:54 +02:00
Philippe Renon
ef137a27b3
OP-1033 Added note where appropriate that changing USB buffer length will require changes to the USB buffer setup
2014-03-03 22:01:13 +01:00
Alessio Morale
2bcbf7dc86
OP-1026 remove legacy idle time calculation in OPLink code
2014-02-22 00:31:06 +01:00
Corvus Corax
5b9a17f630
OP-942 moved DelayedCallbackScheduler into pios/common
2014-02-02 20:31:37 +01:00
Corvus Corax
9414f3513f
adapted telemetry stack sizes for flight firmware to include more space needed for logging feature
2013-11-17 22:39:39 +01:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Brian Webb
774a74884a
OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.
2013-06-26 17:57:11 -07:00
Brian Webb
8c370df319
OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.
2013-06-26 17:56:56 -07:00
Brian Webb
08efc8d152
OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.
2013-06-26 17:56:20 -07:00
Sexy Pony
900f643bbd
Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES
2013-05-19 17:37:30 +03:00
Alessio Morale
c1f767b12d
Merge remote-tracking branch 'origin/amorale/OP-954_logfs_settings_in_internal_flash' into next
...
Conflicts:
flight/pios/common/pios_flashfs_logfs.c
2013-05-18 15:53:25 +02:00
Alessio Morale
c80f01dff9
OP-954 Rename the legacy PIOS_INCLUDE_FLASH_SECTOR_SETTINGS to PIOS_INCLUDE_FLASH_LOGFS_SETTINGS
...
+review OPReview-470
2013-05-15 23:16:34 +02:00
Alessio Morale
07af6b5c80
Added LogFS support for OPLinkMini with internal flash
2013-05-14 23:00:45 +02:00
Alessio Morale
8d57d8ff76
Internal flash settings for F1
...
Conflicts:
flight/pios/stm32f10x/pios_flash_internal.c
2013-05-14 22:58:05 +02:00
Richard Flay (Hyper)
fbc8bc698f
OP-936: Merges branch 'next' into hyper/OP-936_task-monitor-rework, fixes damage/conflicts,
...
and brings the callback scheduler into the fold.
+review OPReview-461
2013-05-06 19:11:14 +09:30
Richard Flay (Hyper)
84e1a81f8b
OP-936: Moves the task monitor code out of the flight library and into PiOS.
...
This move and rework also breaks the dependency of the task monitor on the UAVO subsystem,
and pushes the responsibility for updating the TaskInfo UAVO into the System module.
+review OPReview
2013-05-03 07:01:14 +09:30
Corvus Corax
a0ca66b0cd
Merge branch 'corvuscorax/delayed_callbacks_with_delay' into next
2013-05-01 15:34:16 +02:00
Oleg Semyonov
7032d2a9d6
Merge remote-tracking branch 'origin/next' into os/uncrustify-config
2013-05-01 13:31:38 +02:00
Oleg Semyonov
7c6da1df65
OPLinkMini: remove duplicated pvPortMalloc defines, fix #ifdef macro name
...
When the #define is reformatted by uncrustify, it differs from the same
in FreeRTOS default config and gives error. So the removal of it serves
to 2 purposes: removes the duplication and fixes uncrustified builds.
2013-04-30 16:54:30 +02:00
Corvus Corax
e1233c7780
Merge branch 'next' into corvuscorax/delayed_callbacks_with_delay
...
Conflicts:
flight/targets/Revolution/System/inc/openpilot.h
flight/targets/SimPosix/System/inc/openpilot.h
flight/targets/boards/coptercontrol/firmware/inc/openpilot.h
flight/targets/boards/oplinkmini/firmware/inc/openpilot.h
flight/targets/boards/revolution/firmware/inc/openpilot.h
flight/targets/boards/revoproto/firmware/inc/openpilot.h
2013-04-27 13:26:03 +02:00
Oleg Semyonov
45f456580f
Fix pios debug pin functions and defines (thanks to Mathieu for the patch)
2013-04-26 18:18:31 +03:00
Oleg Semyonov
1dd20eca33
OP-899: move board_hw_defs.c under board directories and fix some includes
2013-04-24 00:07:06 +03:00
Oleg Semyonov
f7f842687a
OP-899: rename System to firmware and move Makefile into it
2013-04-24 00:07:06 +03:00