1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-05 13:24:11 +01:00
Commit Graph

7 Commits

Author SHA1 Message Date
Stacey Sheldon
5f8760a55c com: Move buffering out of USART/HID layer and into COM layer
This allows the spektrum and sbus receiver drivers to bind
directly to the usart layer using a properly exported API
rather than overriding the interrupt handler.

Bytes are now pushed directly from the usart layer into the
com layer without any buffering.  The com layer performs all
of the buffering.

A further benefit from this approach is that we can put all
blocking/non-blocking behaviour into the COM layer and not
in the underlying drivers.

Misc related changes:
 - Remove obsolete .handler field from irq configs
 - Adapt all users of PIOS_COM_* functions to new API
 - Fixup callers of PIOS_USB_HID_Init()
2011-07-27 19:45:38 -04:00
Stacey Sheldon
dbf7574946 bootcfg: use UAVobj to control boot-time HW config
This should mark an end to the compile-time selection of HW
configurations.

Minor changes in board initialization for all platforms:
 - Most config structs are marked static to prevent badly written
   drivers from directly referring to config data.
 - Adapt to changes in .irq fields in config data.
 - Adapt to changes in USART IRQ handling.

Major changes in board initialization for CC:
 - Use HwSettings UAVObj to decide which drivers to attach to
   the "main" port and the flexi port, and select the appropriate
   device configuration data.
 - HwSettings allows choosing between Disabled, Telemetry, SBUS,
   Spektrum,GPS, and I2C for each of the two ports.
 - Use ManualControlSettings.InputMode to init/configure the
   appropriate receiver module, and register its available rx channels
   with the PIOS_RCVR layer.  Can choose between PWM, Spektrum and PPM
   at board init time.  PPM driver is broken, and SBUS will work once
   it is added to this UAVObj as an option.
 - CC build now includes code for SBUS, Spektrum and PWM receivers in
   every firmware image.

PIOS_USART driver:
 - Now handles its own low-level IRQs internally
 - If NULL upper-level IRQ handler is bound in at board init time
   then rx/tx is satisfied by internal PIOS_USART buffered IO routines
   which are (typically) attached to the COM layer.
 - If an alternate upper-level IRQ handler is bound in at board init
   then that handler is called and expected to clear down the USART
   IRQ sources.  This is used by Spektrum and SBUS drivers.

PIOS_SBUS and PIOS_SPEKTRUM drivers:
 - Improved data/API hiding
 - No longer assume they know where their config data is stored which
   allows for boot-time alternate configurations for the driver.
 - Now registers an upper-level IRQ handlerwith the USART layer to
   decouple the driver from which USART it is actually attached to.
2011-07-05 22:03:25 -04:00
zedamota
1cc152b4dd More cleaning, moved stopwatch files to library folder, code formatting. 2011-04-29 20:48:13 +01:00
stac
000234f036 bl_ahrs: bind to new COM, USART and SPI drivers
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2787 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-02-14 01:17:35 +00:00
zedamota
97b44ffb04 OP-21/Flight Bootloader - Various fixes.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1678 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-18 00:46:34 +00:00
pip
d2bc126e68 Added PIOS_COM_AUX_BAUDRATE to pios_board.h & '#if defined' to pios_board.c for easier baudrate setting.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1645 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:33:00 +00:00
zedamota
50b7931a1c OP-21/Flight Bootloader - new bootloaders
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1639 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-09-15 17:06:51 +00:00