James Cotton
3eac69e953
Create stub for waypoint navigation
2012-04-03 03:42:32 -05:00
James Cotton
337d5b7079
Enable guidance in revo. Update manual control to set the position desired
...
when the switch is flipped.
2012-04-03 03:42:25 -05:00
James Cotton
6b88a278b3
Disable overosync by default. It was triggering event system warnings due to
...
the extra updates from altholdsmoothed. Increase queue size when reenabled.
Also AltHold is is trigger warnings because other tasks starve it during
startup.
2012-03-21 00:29:09 -05:00
James Cotton
690f1b5f29
Enable camera stabilization
2012-03-08 01:37:34 -06:00
Stacey Sheldon
e2ab662b5d
sysclk: pass in correct definition for HSE_VALUE
...
The code in RCC_GetClocksFreq() uses HSE_VALUE to determine
the tick rate of the SYSCLK. This in turn is used by the
code in PIOS_DELAY_* to compute delays.
ST Library defaults this to 25MHz for the F4. Our board
actually has an 8MHz oscillator so delays were way off.
Mostly affects the bootloaders since most FW code uses RTOS
delays rather than busy-waiting using PIOS_DELAY_*.
2012-03-07 19:52:54 -05:00
Stacey Sheldon
0684a42fac
build: use board-specific JTAG interface for openocd
...
Removes hard-coding of JTAG interface config in the
<board>_program make macros.
This allows the use of STLINKv2 for F4 boards while
continuing to use the FOSS JTAG revB on F1 boards.
2012-03-03 08:43:01 -05:00
James Cotton
e3df261213
Merge branch 'stac/revo-usb' into revolution
...
Conflicts:
flight/Revolution/System/pios_board.c
2012-03-02 13:00:13 -06:00
James Cotton
49a03a868b
Merge branch 'altitudehold' into revolution_overo
...
Conflicts:
flight/OpenPilot/UAVObjects.inc
flight/Project/OpenPilotOSX/OpenPilotOSX.xcodeproj/project.pbxproj
flight/Revolution/Makefile
flight/Revolution/ins.c
2012-02-07 23:00:29 -06:00
Stacey Sheldon
e2939dae2a
revo usb: Add support for USB to Revo
2012-02-07 02:25:31 -05:00
Stacey Sheldon
8b73ae7d16
remove trailing whitespace
2012-02-07 02:25:31 -05:00
James Cotton
5b2376dbee
Remove the semaphore for buffer swapping and make this occur during the receive
...
ISR. This leads to a possible condition where a copy is taking place in
userspace and then a buffer swap interrupts it. However, the copy should
always finish before the SPI DMA slave catches up to that place in memory at 10
MHz.
This fixes a common condition where the userspace task (low priority) was not
swapping buffers in time from user space and logs were corrupted.
2012-02-06 08:21:24 -06:00
James Cotton
95abb56d5e
Added module to send updates out the SPI port
2012-02-02 09:19:25 -06:00
James Cotton
7eab883d5c
Fix some small revolution typos
2012-01-25 22:50:19 -06:00
James Cotton
0da20bb846
Flash: Because most of the commands are a JEDEC standard rename this file
...
pios_flash_jedec and abstract out the methods that can vary between chips.
2012-01-25 00:23:24 -06:00
James Cotton
c242ab8b86
Merge branch 'next' into revolution3
...
Conflicts:
flight/AHRS/ahrs.c
flight/AHRS/pios_board.c
flight/Bootloaders/Revolution/Makefile
flight/CopterControl/System/pios_board.c
flight/INS/pios_board.c
flight/OpenPilot/Makefile
flight/OpenPilot/System/openpilot.c
flight/OpenPilot/System/pios_board.c
flight/PiOS/Boards/STM32103CB_CC_Rev1.h
flight/PiOS/Boards/STM32F4xx_Revolution.h
flight/Revolution/Makefile
flight/Revolution/System/inc/pios_config.h
flight/Revolution/test.c
2012-01-24 10:46:35 -06:00
James Cotton
b01d5c6b87
Include the drivers from the common directory
2012-01-23 16:58:07 -06:00
James Cotton
fe44a3d37a
Reference correct taskmonitor file compiled in to revolution
2012-01-21 13:22:17 -06:00
James Cotton
ef05cafaca
Merge branch 'revolution' into altitudehold
...
Conflicts:
flight/Libraries/insgps13state.c
flight/OpenPilot/Makefile
ground/openpilotgcs/src/plugins/uavobjects/uavobjects.pro
2012-01-01 10:50:35 -06:00
James Cotton
05da41a79b
Get FirmwareIAP object working on revo
2011-12-24 13:15:56 -06:00
James Cotton
569b201b58
Move the bl_helper out of the common directory as it isn't
2011-12-24 13:10:23 -06:00
James Cotton
fd8899018f
Get EKF running
2011-12-14 01:54:06 -06:00
James Cotton
ed7cbd5a6c
Have to initialize the BaroAltitude object ini the init section for it to show
...
up on telemetry
2011-12-13 23:27:26 -06:00
James Cotton
a37a17a4fb
Created a separate Sensor module and Attitude module for revolution
2011-12-12 21:40:39 -06:00
James Cotton
43fa9e702e
Move DSM to Flexiport and enable GPS on GPS port. Currently GPS module locks
...
up though.
2011-11-28 09:11:13 -06:00
James Cotton
8bbc767a4e
Get the pressure sensor working and reading into Revolution
2011-11-27 00:52:09 -06:00
James Cotton
b11a4f7405
Clean up the actuator module for floating point usage. Also there was a bug I
...
don't understand where the channels should be scaled AFTER all of them are
computed. It feels like a memory overwriting bug and needs followup.
2011-11-26 16:12:32 -06:00
James Cotton
7637e9f669
Get flash chip working and saving to memory. Also get the I2C working with
...
BMA180 driver.
2011-11-19 00:13:02 -06:00
James Cotton
0efffef1fa
Work on bringing the Revolution board up
2011-11-17 10:13:34 -06:00
James Cotton
8477c2229b
Using real prototype board now. Move telemetry to GPS port for easy-ness right
...
now.
2011-11-17 01:58:51 -06:00
James Cotton
1e2fe77e3f
Start migrating the attitude solution to FreeRTOS
2011-11-13 18:51:35 -06:00
James Cotton
c0f16d2f44
Revolution: Configure clocks correctly
2011-11-03 20:12:34 -05:00
James Cotton
a2015a4f8d
Compiled and flashing
2011-11-02 13:20:39 -05:00
James Cotton
0ce80e02f5
Compiles now
2011-11-02 02:51:20 -05:00
James Cotton
48d2e038bb
More work to the revolution build
2011-11-01 04:39:20 -05:00
James Cotton
7ee4a0412c
Work on the build process and include FreeRTOS
2011-11-01 03:20:25 -05:00
James Cotton
cdb6059752
Coyp over some of how the PH build system works
2011-11-01 01:36:52 -05:00
James Cotton
9bdd021b2e
Make new Revolution target
2011-11-01 01:17:59 -05:00
