1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-04 12:24:11 +01:00
Commit Graph

66 Commits

Author SHA1 Message Date
peabody124
cc2441d41b Adding ADC downsampling code
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1296 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 04:08:57 +00:00
stac
3125ecfc4e AHRSComms: altitude sensor data is now sent to AHRS
Altitude/pressure sensor data is sent to the AHRS whenever
the AltitudeActual object is updated.

Altitude, Pressure and Temperature are sent as floats.
Same as in the UAVObject that goes to the GCS.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1291 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 01:02:13 +00:00
peabody124
d4c5dba234 [PIOS] The ADC mappings are strange because of the way the DMA engine works. Basically data is packed 16 bits ADC2 then 16 bits ADC1 channels, so the accels are pins [4 2 0] currently. Also there is inconsistency between the names of the pins in the config file which uses 1 based indexing and the index for PIOS_ADC_PinGet which is zero based and has to account for this interleaving. Probably should adjust config file to be zero based and then to make those pin numbers map to the function call. The actual order they appear is arbitrary as the ADC engine can scan in whatever order.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1290 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-15 00:53:30 +00:00
stac
c3e509c2cb attituderaw: Replace HeadingActual with AttitudeRaw
AttitudeRaw now includes:
 - magnetometers XYZ (in mG)
 - gyros XYZ (raw ADC samples)
 - accelerometers XYZ (raw ADC samples)
 - placeholder for gyro temp sensors (read as zero for now)

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1289 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-14 23:42:14 +00:00
stac
05485e5b63 ahrs: tie main loop into SPI link FSM
- AHRS mainloop now runs flat out updating sensor data and
processing any messages sent from the OP board.
- Raw data is provided from the magnetometers
- Fake data is provided for attitude solution
- Correct data is provided for serial number queries

Note: There is a bug in the i2c code that very quickly leaves the
      magnetometer in a broken state and returning incorrect values.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1013 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:47 +00:00
stac
29a8f05ac9 mag sensor: put some bounds on the parameters
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-07-04 02:21:45 +00:00
stac
771a56ca9d com/usart: generalize com driver API
- Created a pluggable COM layer
- Converted COM + USART init into static initializers
  rather than typedefs
- Generalized the USB HID COM API to match the USART
  API.
- Changed USART and COM layers to be data driven rather
  than #ifdef'ing/switching on the specifics of each port

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@760 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:24:26 +00:00
stac
8d015a57d0 pios spi: support both master and slave configs
Added support for SPI slave configurations to the pios SPI layer.

Converted the board specific configuration for the PIOS SPI layer to
use const static initializers rather than #defines (see pios_board.c).

SPI interface between the OP board and the AHRS is now operational at
a basic level, capable of moving simple single byte messages between
boards.  Multi-byte, CRC protected messages will be added on top of this.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@759 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-06-13 04:23:44 +00:00
gussy
5991a93739 Added GPIO functions for accelerometer full-scale selection.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@625 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-15 15:27:52 +00:00
gussy
73b5e29e02 Finalised and verified PIOS_HMC5843 library.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@624 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-15 12:50:05 +00:00
gussy
f9256b22d0 AHRS basic sensor test code revision.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@619 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-13 09:40:00 +00:00
gussy
22fbd8e4bd ADC Updates.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@618 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-12 12:09:35 +00:00
gussy
ff73ab5a80 More updates to cross-target compatibility.
Added PIOS_I2C into AHRS code.
Added PIOS_HMC5843 Module.




git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@617 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-12 08:18:49 +00:00
gussy
8f3c2dbafb Changes to PiOS to be compatible with the AHRS.
Updates to AHRS code.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@615 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-05-11 13:36:13 +00:00
dankers
c8c0e8be9e Comment changes
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@220 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-03-02 00:57:09 +00:00
gussy
fbb175e01c Initial commit of AHRS project code base.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@212 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-02-28 12:10:48 +00:00