rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
Code Issues Releases Activity
29ec2f198b
LibrePilot/flight/CopterControl/Makefile
Stacey Sheldon 29ec2f198b build: convert all app loads to require bootloaders 
This change is made up of a number of tightly coupled
changes:
 - Deprecate the use of the USE_BOOTLOADER command-line
   option.  It is now hard-coded in each Makefile.
   Overriding it on the command line is not allowed.
 - Split apart the memory declaration and the section
   declaration in all linker files (*_memory.ld and
   *_sections.ld).
 - Describe the split between bootloader and app sections
   of flash in each board's _memory.ld file.
 - Change program target to selectively erase flash so
   that the installed bootloader is preserved across even
   JTAG programming operations.
 - All elf files are built with debug symbols and are not
   stripped.  This should help debugging with gdb.  The
   images programmed on the boards are all .bin files now
   which do not include symbols.
2011-05-08 12:40:29 -04:00

634 lines
20 KiB
Makefile
Raw Blame History

#####
# Project: OpenPilot
#
#
# Makefile for OpenPilot project build PiOS and the AP.
#
# The OpenPilot Team, http://www.openpilot.org, Copyright (C) 2009.
#
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#####
WHEREAMI := $(dir $(lastword $(MAKEFILE_LIST)))
TOP := $(realpath $(WHEREAMI)/../../)
include $(TOP)/make/firmware-defs.mk
# Set developer code and compile options
# Set to YES to compile for debugging
DEBUG ?= NO
# Set to YES to build a FW version that will erase all flash memory
ERASE_FLASH ?= NO
# Set to YES to use the Servo output pins for debugging via scope or logic analyser
ENABLE_DEBUG_PINS ?= NO
# Set to Yes to enable the AUX UART which is mapped on the S1 (Tx) and S2 (Rx) servo outputs
ENABLE_AUX_UART ?= NO
USE_SPEKTRUM ?= NO
USE_I2C ?= NO
# Set to YES when using Code Sourcery toolchain
CODE_SOURCERY ?= YES
# Remove command is different for Code Sourcery on Windows
ifeq ($(CODE_SOURCERY), YES)
REMOVE_CMD = cs-rm
else
REMOVE_CMD = rm
endif
FLASH_TOOL = OPENOCD
# List of modules to include
MODULES = Telemetry Attitude Stabilization Actuator ManualControl FirmwareIAP
# MCU name, submodel and board
# - MCU used for compiler-option (-mcpu)
# - MODEL used for linker-script name (-T) and passed as define
# - BOARD just passed as define (optional)
MCU = cortex-m3
CHIP = STM32F103CBT
BOARD = STM32103CB_CC_Rev1
MODEL = MD
# Directory for output files (lst, obj, dep, elf, sym, map, hex, bin etc.)
OUTDIR = $(TOP)/build/coptercontrol
# Target file name (without extension).
TARGET = CopterControl
# Paths
OPSYSTEM = ./System
OPSYSTEMINC = $(OPSYSTEM)/inc
OPUAVTALK = ../UAVTalk
OPUAVTALKINC = $(OPUAVTALK)/inc
OPUAVOBJ = ../UAVObjects
OPUAVOBJINC = $(OPUAVOBJ)/inc
OPTESTS = ./Tests
OPMODULEDIR = ../Modules
FLIGHTLIB = ../Libraries
FLIGHTLIBINC = $(FLIGHTLIB)/inc
PIOS = ../PiOS
PIOSINC = $(PIOS)/inc
PIOSSTM32F10X = $(PIOS)/STM32F10x
PIOSCOMMON = $(PIOS)/Common
PIOSBOARDS = $(PIOS)/Boards
APPLIBDIR = $(PIOSSTM32F10X)/Libraries
STMLIBDIR = $(APPLIBDIR)
STMSPDDIR = $(STMLIBDIR)/STM32F10x_StdPeriph_Driver
STMUSBDIR = $(STMLIBDIR)/STM32_USB-FS-Device_Driver
STMSPDSRCDIR = $(STMSPDDIR)/src
STMSPDINCDIR = $(STMSPDDIR)/inc
STMUSBSRCDIR = $(STMUSBDIR)/src
STMUSBINCDIR = $(STMUSBDIR)/inc
CMSISDIR = $(STMLIBDIR)/CMSIS/Core/CM3
DOSFSDIR = $(APPLIBDIR)/dosfs
MSDDIR = $(APPLIBDIR)/msd
RTOSDIR = $(APPLIBDIR)/FreeRTOS
RTOSSRCDIR = $(RTOSDIR)/Source
RTOSINCDIR = $(RTOSSRCDIR)/include
DOXYGENDIR = ../Doc/Doxygen
AHRSBOOTLOADER = ../Bootloaders/AHRS/
AHRSBOOTLOADERINC = $(AHRSBOOTLOADER)/inc
PYMITE = $(FLIGHTLIB)/PyMite
PYMITELIB = $(PYMITE)/lib
PYMITEPLAT = $(PYMITE)/platform/openpilot
PYMITETOOLS = $(PYMITE)/tools
PYMITEVM = $(PYMITE)/vm
PYMITEINC = $(PYMITEVM)
PYMITEINC += $(PYMITEPLAT)
PYMITEINC += $(OUTDIR)
FLIGHTPLANLIB = $(OPMODULEDIR)/FlightPlan/lib
FLIGHTPLANS = $(OPMODULEDIR)/FlightPlan/flightplans
OPUAVSYNTHDIR = $(OUTDIR)/../uavobject-synthetics/flight
# List C source files here. (C dependencies are automatically generated.)
# use file-extension c for "c-only"-files
MODNAMES = $(notdir ${MODULES})
ifndef TESTAPP
## MODULES
SRC += ${foreach MOD, ${MODULES}, ${wildcard ${OPMODULEDIR}/${MOD}/*.c}}
SRC += ${OUTDIR}/InitMods.c
## OPENPILOT CORE:
SRC += ${OPMODULEDIR}/System/systemmod.c
SRC += $(OPSYSTEM)/coptercontrol.c
SRC += $(OPSYSTEM)/pios_board.c
SRC += $(OPSYSTEM)/alarms.c
SRC += $(OPSYSTEM)/taskmonitor.c
SRC += $(OPUAVTALK)/uavtalk.c
SRC += $(OPUAVOBJ)/uavobjectmanager.c
SRC += $(OPUAVOBJ)/eventdispatcher.c
SRC += $(OPUAVOBJ)/uavobjectsinit_linker.c
SRC += $(OPSYSTEM)/pios_usb_hid_desc.c
else
## TESTCODE
SRC += $(OPTESTS)/test_common.c
SRC += $(OPTESTS)/$(TESTAPP).c
endif
## UAVOBJECTS
ifndef TESTAPP
SRC += $(OPUAVSYNTHDIR)/objectpersistence.c
SRC += $(OPUAVSYNTHDIR)/gcstelemetrystats.c
SRC += $(OPUAVSYNTHDIR)/flighttelemetrystats.c
SRC += $(OPUAVSYNTHDIR)/systemstats.c
SRC += $(OPUAVSYNTHDIR)/systemalarms.c
SRC += $(OPUAVSYNTHDIR)/systemsettings.c
SRC += $(OPUAVSYNTHDIR)/stabilizationdesired.c
SRC += $(OPUAVSYNTHDIR)/stabilizationsettings.c
SRC += $(OPUAVSYNTHDIR)/actuatorcommand.c
SRC += $(OPUAVSYNTHDIR)/actuatordesired.c
SRC += $(OPUAVSYNTHDIR)/actuatorsettings.c
SRC += $(OPUAVSYNTHDIR)/attituderaw.c
SRC += $(OPUAVSYNTHDIR)/attitudeactual.c
SRC += $(OPUAVSYNTHDIR)/manualcontrolcommand.c
SRC += $(OPUAVSYNTHDIR)/taskinfo.c
SRC += $(OPUAVSYNTHDIR)/i2cstats.c
SRC += $(OPUAVSYNTHDIR)/watchdogstatus.c
SRC += $(OPUAVSYNTHDIR)/telemetrysettings.c
SRC += $(OPUAVSYNTHDIR)/ratedesired.c
SRC += $(OPUAVSYNTHDIR)/manualcontrolsettings.c
SRC += $(OPUAVSYNTHDIR)/mixersettings.c
SRC += $(OPUAVSYNTHDIR)/mixerstatus.c
SRC += $(OPUAVSYNTHDIR)/firmwareiapobj.c
SRC += $(OPUAVSYNTHDIR)/attitudesettings.c
#${wildcard ${OBJ}/$(shell echo $(VAR) | tr A-Z a-z)/*.c}
#SRC += ${foreach OBJ, ${UAVOBJECTS}, $(UAVOBJECTS)/$(OBJ).c}
# Cant use until i can automatically generate list of UAVObjects
#SRC += ${OUTDIR}/InitObjects.c
endif
## PIOS Hardware (STM32F10x)
SRC += $(PIOSSTM32F10X)/pios_sys.c
SRC += $(PIOSSTM32F10X)/pios_led.c
SRC += $(PIOSSTM32F10X)/pios_delay.c
SRC += $(PIOSSTM32F10X)/pios_usart.c
SRC += $(PIOSSTM32F10X)/pios_irq.c
SRC += $(PIOSSTM32F10X)/pios_adc.c
SRC += $(PIOSSTM32F10X)/pios_servo.c
SRC += $(PIOSSTM32F10X)/pios_i2c.c
SRC += $(PIOSSTM32F10X)/pios_spi.c
SRC += $(PIOSSTM32F10X)/pios_ppm.c
SRC += $(PIOSSTM32F10X)/pios_pwm.c
SRC += $(PIOSSTM32F10X)/pios_spektrum.c
SRC += $(PIOSSTM32F10X)/pios_debug.c
SRC += $(PIOSSTM32F10X)/pios_gpio.c
SRC += $(PIOSSTM32F10X)/pios_exti.c
SRC += $(PIOSSTM32F10X)/pios_wdg.c
# PIOS USB related files (seperated to make code maintenance more easy)
SRC += $(PIOSSTM32F10X)/pios_usb_hid.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_istr.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_prop.c
SRC += $(PIOSSTM32F10X)/pios_usb_hid_pwr.c
## PIOS Hardware (Common)
SRC += $(PIOSCOMMON)/pios_flash_w25x.c
SRC += $(PIOSCOMMON)/pios_adxl345.c
SRC += $(PIOSCOMMON)/pios_com.c
SRC += $(PIOSCOMMON)/pios_i2c_esc.c
SRC += $(PIOSCOMMON)/pios_iap.c
SRC += $(PIOSCOMMON)/pios_bl_helper.c
SRC += $(PIOSCOMMON)/printf-stdarg.c
## Libraries for flight calculations
SRC += $(FLIGHTLIB)/fifo_buffer.c
SRC += $(FLIGHTLIB)/CoordinateConversions.c
## CMSIS for STM32
SRC += $(CMSISDIR)/core_cm3.c
SRC += $(CMSISDIR)/system_stm32f10x.c
## Used parts of the STM-Library
SRC += $(STMSPDSRCDIR)/stm32f10x_adc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_bkp.c
SRC += $(STMSPDSRCDIR)/stm32f10x_crc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dac.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dma.c
SRC += $(STMSPDSRCDIR)/stm32f10x_exti.c
SRC += $(STMSPDSRCDIR)/stm32f10x_flash.c
SRC += $(STMSPDSRCDIR)/stm32f10x_gpio.c
SRC += $(STMSPDSRCDIR)/stm32f10x_i2c.c
SRC += $(STMSPDSRCDIR)/stm32f10x_pwr.c
SRC += $(STMSPDSRCDIR)/stm32f10x_rcc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_rtc.c
SRC += $(STMSPDSRCDIR)/stm32f10x_spi.c
SRC += $(STMSPDSRCDIR)/stm32f10x_tim.c
SRC += $(STMSPDSRCDIR)/stm32f10x_usart.c
SRC += $(STMSPDSRCDIR)/stm32f10x_iwdg.c
SRC += $(STMSPDSRCDIR)/stm32f10x_dbgmcu.c
SRC += $(STMSPDSRCDIR)/misc.c
## STM32 USB Library
SRC += $(STMUSBSRCDIR)/usb_core.c
SRC += $(STMUSBSRCDIR)/usb_init.c
SRC += $(STMUSBSRCDIR)/usb_int.c
SRC += $(STMUSBSRCDIR)/usb_mem.c
SRC += $(STMUSBSRCDIR)/usb_regs.c
SRC += $(STMUSBSRCDIR)/usb_sil.c
## RTOS
SRC += $(RTOSSRCDIR)/list.c
SRC += $(RTOSSRCDIR)/queue.c
SRC += $(RTOSSRCDIR)/tasks.c
## RTOS Portable
SRC += $(RTOSSRCDIR)/portable/GCC/ARM_CM3/port.c
SRC += $(RTOSSRCDIR)/portable/MemMang/heap_1.c
## Dosfs file system
#SRC += $(DOSFSDIR)/dosfs.c
#SRC += $(DOSFSDIR)/dfs_sdcard.c
## PyMite files
#SRC += $(wildcard ${PYMITEVM}/*.c)
#SRC += $(wildcard ${PYMITEPLAT}/*.c)
#SRC += $(OUTDIR)/pmlib_img.c
#SRC += $(OUTDIR)/pmlib_nat.c
#SRC += $(OUTDIR)/pmlibusr_img.c
#SRC += $(OUTDIR)/pmlibusr_nat.c
## Mass Storage Device
#SRC += $(MSDDIR)/msd.c
#SRC += $(MSDDIR)/msd_bot.c
#SRC += $(MSDDIR)/msd_desc.c
#SRC += $(MSDDIR)/msd_memory.c
#SRC += $(MSDDIR)/msd_scsi.c
#SRC += $(MSDDIR)/msd_scsi_data.c
# List C source files here which must be compiled in ARM-Mode (no -mthumb).
# use file-extension c for "c-only"-files
## just for testing, timer.c could be compiled in thumb-mode too
SRCARM =
# List C++ source files here.
# use file-extension .cpp for C++-files (not .C)
CPPSRC =
# List C++ source files here which must be compiled in ARM-Mode.
# use file-extension .cpp for C++-files (not .C)
#CPPSRCARM = $(TARGET).cpp
CPPSRCARM =
# List Assembler source files here.
# Make them always end in a capital .S. Files ending in a lowercase .s
# will not be considered source files but generated files (assembler
# output from the compiler), and will be deleted upon "make clean"!
# Even though the DOS/Win* filesystem matches both .s and .S the same,
# it will preserve the spelling of the filenames, and gcc itself does
# care about how the name is spelled on its command-line.
ASRC = $(PIOSSTM32F10X)/startup_stm32f10x_$(MODEL)_CC.S
# List Assembler source files here which must be assembled in ARM-Mode..
ASRCARM =
# List any extra directories to look for include files here.
# Each directory must be seperated by a space.
EXTRAINCDIRS = $(OPSYSTEM)
EXTRAINCDIRS += $(OPSYSTEMINC)
EXTRAINCDIRS += $(OPUAVTALK)
EXTRAINCDIRS += $(OPUAVTALKINC)
EXTRAINCDIRS += $(OPUAVOBJ)
EXTRAINCDIRS += $(OPUAVOBJINC)
EXTRAINCDIRS += $(OPUAVSYNTHDIR)
EXTRAINCDIRS += $(PIOS)
EXTRAINCDIRS += $(PIOSINC)
EXTRAINCDIRS += $(FLIGHTLIBINC)
EXTRAINCDIRS += $(PIOSSTM32F10X)
EXTRAINCDIRS += $(PIOSCOMMON)
EXTRAINCDIRS += $(PIOSBOARDS)
EXTRAINCDIRS += $(STMSPDINCDIR)
EXTRAINCDIRS += $(STMUSBINCDIR)
EXTRAINCDIRS += $(CMSISDIR)
EXTRAINCDIRS += $(DOSFSDIR)
EXTRAINCDIRS += $(MSDDIR)
EXTRAINCDIRS += $(RTOSINCDIR)
EXTRAINCDIRS += $(APPLIBDIR)
EXTRAINCDIRS += $(RTOSSRCDIR)/portable/GCC/ARM_CM3
EXTRAINCDIRS += $(AHRSBOOTLOADERINC)
EXTRAINCDIRS += $(PYMITEINC)
EXTRAINCDIRS += ${foreach MOD, ${MODULES}, ${OPMODULEDIR}/${MOD}/inc} ${OPMODULEDIR}/System/inc
# List any extra directories to look for library files here.
# Also add directories where the linker should search for
# includes from linker-script to the list
# Each directory must be seperated by a space.
EXTRA_LIBDIRS =
# Extra Libraries
# Each library-name must be seperated by a space.
# i.e. to link with libxyz.a, libabc.a and libefsl.a:
# EXTRA_LIBS = xyz abc efsl
# for newlib-lpc (file: libnewlibc-lpc.a):
# EXTRA_LIBS = newlib-lpc
EXTRA_LIBS =
# Path to Linker-Scripts
LINKERSCRIPTPATH = $(PIOSSTM32F10X)
# Optimization level, can be [0, 1, 2, 3, s].
# 0 = turn off optimization. s = optimize for size.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
ifeq ($(DEBUG),YES)
OPT = 1
else
OPT = s
endif
# Output format. (can be ihex or binary or both)
# binary to create a load-image in raw-binary format i.e. for SAM-BA,
# ihex to create a load-image in Intel hex format
#LOADFORMAT = ihex
#LOADFORMAT = binary
LOADFORMAT = both
# Debugging format.
DEBUGF = dwarf-2
# Place project-specific -D (define) and/or
# -U options for C here.
CDEFS = -DSTM32F10X_$(MODEL)
CDEFS += -DUSE_STDPERIPH_DRIVER
CDEFS += -DUSE_$(BOARD)
ifeq ($(ENABLE_DEBUG_PINS), YES)
CDEFS += -DPIOS_ENABLE_DEBUG_PINS
endif
ifeq ($(ENABLE_AUX_UART), YES)
CDEFS += -DPIOS_ENABLE_AUX_UART
endif
CDEFS += -DUSE_BOOTLOADER
ifeq ($(ERASE_FLASH), YES)
CDEFS += -DERASE_FLASH
endif
ifeq ($(USE_SPEKTRUM), YES)
CDEFS += -DUSE_SPEKTRUM
endif
ifeq ($(USE_I2C), YES)
CDEFS += -DUSE_I2C
endif
# Place project-specific -D and/or -U options for
# Assembler with preprocessor here.
#ADEFS = -DUSE_IRQ_ASM_WRAPPER
ADEFS = -D__ASSEMBLY__
# Compiler flag to set the C Standard level.
# c89 - "ANSI" C
# gnu89 - c89 plus GCC extensions
# c99 - ISO C99 standard (not yet fully implemented)
# gnu99 - c99 plus GCC extensions
CSTANDARD = -std=gnu99
#-----
# Compiler flags.
# -g*: generate debugging information
# -O*: optimization level
# -f...: tuning, see GCC manual and avr-libc documentation
# -Wall...: warning level
# -Wa,...: tell GCC to pass this to the assembler.
# -adhlns...: create assembler listing
#
# Flags for C and C++ (arm-elf-gcc/arm-elf-g++)
ifeq ($(DEBUG),YES)
CFLAGS = -g$(DEBUGF) -DDEBUG
endif
CFLAGS += -O$(OPT)
CFLAGS += -mcpu=$(MCU)
CFLAGS += $(CDEFS)
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -I.
#CFLAGS += -fno-cprop-registers -fno-defer-pop -fno-guess-branch-probability -fno-section-anchors
#CFLAGS += -fno-if-conversion -fno-if-conversion2 -fno-ipa-pure-const -fno-ipa-reference -fno-merge-constants
#CFLAGS += -fno-split-wide-types -fno-tree-ccp -fno-tree-ch -fno-tree-copy-prop -fno-tree-copyrename
#CFLAGS += -fno-tree-dce -fno-tree-dominator-opts -fno-tree-dse -fno-tree-fre -fno-tree-sink -fno-tree-sra
#CFLAGS += -fno-tree-ter
#CFLAGS += -g$(DEBUGF) -DDEBUG
CFLAGS += -mapcs-frame
CFLAGS += -fomit-frame-pointer
CFLAGS += -fpromote-loop-indices
CFLAGS += -Wall
CFLAGS += -Werror
CFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
# Compiler flags to generate dependency files:
CFLAGS += -MD -MP -MF $(OUTDIR)/dep/$(@F).d
# flags only for C
#CONLYFLAGS += -Wnested-externs
CONLYFLAGS += $(CSTANDARD)
# Assembler flags.
# -Wa,...: tell GCC to pass this to the assembler.
# -ahlns: create listing
ASFLAGS = -mcpu=$(MCU) -I. -x assembler-with-cpp
ASFLAGS += $(ADEFS)
ASFLAGS += -Wa,-adhlns=$(addprefix $(OUTDIR)/, $(notdir $(addsuffix .lst, $(basename $<))))
ASFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
MATH_LIB = -lm
# Linker flags.
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
LDFLAGS = -nostartfiles -Wl,-Map=$(OUTDIR)/$(TARGET).map,--cref,--gc-sections
LDFLAGS += $(patsubst %,-L%,$(EXTRA_LIBDIRS))
LDFLAGS += -lc
LDFLAGS += $(patsubst %,-l%,$(EXTRA_LIBS))
LDFLAGS += $(MATH_LIB)
LDFLAGS += -lc -lgcc
# Set linker-script name depending on selected submodel name
LDFLAGS += -T$(LINKERSCRIPTPATH)/link_$(BOARD)_memory.ld
LDFLAGS += -T$(LINKERSCRIPTPATH)/link_$(BOARD)_sections.ld
OOCD_LOADFILE+=$(OUTDIR)/$(TARGET).bin
# Program
OOCD_CL+=-c "flash write_image erase $(OOCD_LOADFILE) 0x08003000 bin"
# Verify
OOCD_CL+=-c "verify_image $(OOCD_LOADFILE) 0x08003000 bin"
# reset target
OOCD_CL+=-c "reset run"
# terminate OOCD after programming
OOCD_CL+=-c shutdown
# Define programs and commands.
REMOVE = $(REMOVE_CMD) -f
PYTHON = python
###SHELL = sh
###COPY = cp
# List of all source files.
ALLSRC = $(ASRCARM) $(ASRC) $(SRCARM) $(SRC) $(CPPSRCARM) $(CPPSRC)
# List of all source files without directory and file-extension.
ALLSRCBASE = $(notdir $(basename $(ALLSRC)))
# Define all object files.
ALLOBJ = $(addprefix $(OUTDIR)/, $(addsuffix .o, $(ALLSRCBASE)))
# Define all listing files (used for make clean).
LSTFILES = $(addprefix $(OUTDIR)/, $(addsuffix .lst, $(ALLSRCBASE)))
# Define all depedency-files (used for make clean).
DEPFILES = $(addprefix $(OUTDIR)/dep/, $(addsuffix .o.d, $(ALLSRCBASE)))
# Default target.
all: gencode build
ifeq ($(LOADFORMAT),ihex)
build: elf hex lss sym
else
ifeq ($(LOADFORMAT),binary)
build: elf bin lss sym
else
ifeq ($(LOADFORMAT),both)
build: elf hex bin lss sym
else
$(error "$(MSG_FORMATERROR) $(FORMAT)")
endif
endif
endif
# Generate intermediate code for objects
gencode: ${OUTDIR}/InitMods.c
# Generate code for module initialization
${OUTDIR}/InitMods.c: Makefile
@echo $(MSG_MODINIT) $(call toprel, $@)
@echo ${quote}// Autogenerated file${quote} > ${OUTDIR}/InitMods.c
@echo ${quote}${foreach MOD, ${MODNAMES}, extern unsigned int ${MOD}Initialize(void);}${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}void InitModules() {${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}${foreach MOD, ${MODNAMES}, ${MOD}Initialize();}${quote} >> ${OUTDIR}/InitMods.c
@echo ${quote}}${quote} >> ${OUTDIR}/InitMods.c
# Generate code for PyMite
#$(OUTDIR)/pmlib_img.c $(OUTDIR)/pmlib_nat.c $(OUTDIR)/pmlibusr_img.c $(OUTDIR)/pmlibusr_nat.c $(OUTDIR)/pmfeatures.h: $(wildcard $(PYMITELIB)/*.py) $(wildcard $(PYMITEPLAT)/*.py) $(wildcard $(FLIGHTPLANLIB)/*.py) $(wildcard $(FLIGHTPLANS)/*.py)
# @echo $(MSG_PYMITEINIT) $(call toprel, $@)
# @$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -s --memspace=flash -o $(OUTDIR)/pmlib_img.c --native-file=$(OUTDIR)/pmlib_nat.c $(PYMITELIB)/list.py $(PYMITELIB)/dict.py $(PYMITELIB)/__bi.py $(PYMITELIB)/sys.py $(PYMITELIB)/string.py $(wildcard $(FLIGHTPLANLIB)/*.py)
# @$(PYTHON) $(PYMITETOOLS)/pmGenPmFeatures.py $(PYMITEPLAT)/pmfeatures.py > $(OUTDIR)/pmfeatures.h
# @$(PYTHON) $(PYMITETOOLS)/pmImgCreator.py -f $(PYMITEPLAT)/pmfeatures.py -c -u -o $(OUTDIR)/pmlibusr_img.c --native-file=$(OUTDIR)/pmlibusr_nat.c $(FLIGHTPLANS)/test.py
ifeq ($(FLASH_TOOL),OPENOCD)
# Program the device with Dominic Rath's OPENOCD in "batch-mode", needs cfg and "reset-script".
program: $(OUTDIR)/$(TARGET).bin
@echo ${quote}Programming with OPENOCD${quote}
$(OOCD_EXE) $(OOCD_CL)
endif
# Link: create ELF output file from object files.
$(eval $(call LINK_TEMPLATE, $(OUTDIR)/$(TARGET).elf, $(ALLOBJ)))
# Assemble: create object files from assembler source files.
$(foreach src, $(ASRC), $(eval $(call ASSEMBLE_TEMPLATE, $(src))))
# Assemble: create object files from assembler source files. ARM-only
$(foreach src, $(ASRCARM), $(eval $(call ASSEMBLE_ARM_TEMPLATE, $(src))))
# Compile: create object files from C source files.
$(foreach src, $(SRC), $(eval $(call COMPILE_C_TEMPLATE, $(src))))
# Compile: create object files from C source files. ARM-only
$(foreach src, $(SRCARM), $(eval $(call COMPILE_C_ARM_TEMPLATE, $(src))))
# Compile: create object files from C++ source files.
$(foreach src, $(CPPSRC), $(eval $(call COMPILE_CPP_TEMPLATE, $(src))))
# Compile: create object files from C++ source files. ARM-only
$(foreach src, $(CPPSRCARM), $(eval $(call COMPILE_CPP_ARM_TEMPLATE, $(src))))
# Compile: create assembler files from C source files. ARM/Thumb
$(eval $(call PARTIAL_COMPILE_TEMPLATE, SRC))
# Compile: create assembler files from C source files. ARM only
$(eval $(call PARTIAL_COMPILE_ARM_TEMPLATE, SRCARM))
$(OUTDIR)/$(TARGET).bin.o: $(OUTDIR)/$(TARGET).bin
.PHONY: elf lss sym hex bin bino
elf: $(OUTDIR)/$(TARGET).elf
lss: $(OUTDIR)/$(TARGET).lss
sym: $(OUTDIR)/$(TARGET).sym
hex: $(OUTDIR)/$(TARGET).hex
bin: $(OUTDIR)/$(TARGET).bin
bino: $(OUTDIR)/$(TARGET).bin.o
# Display sizes of sections.
$(eval $(call SIZE_TEMPLATE, $(OUTDIR)/$(TARGET).elf))
.PHONY: size
size: $(OUTDIR)/$(TARGET).elf_size
# Generate Doxygen documents
docs:
doxygen $(DOXYGENDIR)/doxygen.cfg
# Target: clean project.
clean: clean_list
clean_list :
@echo $(MSG_CLEANING)
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).map
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).elf
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).hex
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).sym
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).lss
$(V1) $(REMOVE) $(OUTDIR)/$(TARGET).bin.o
$(V1) $(REMOVE) $(wildcard $(OUTDIR)/*.c)
$(V1) $(REMOVE) $(wildcard $(OUTDIR)/*.h)
$(V1) $(REMOVE) $(ALLOBJ)
$(V1) $(REMOVE) $(LSTFILES)
$(V1) $(REMOVE) $(DEPFILES)
$(V1) $(REMOVE) $(SRC:.c=.s)
$(V1) $(REMOVE) $(SRCARM:.c=.s)
$(V1) $(REMOVE) $(CPPSRC:.cpp=.s)
$(V1) $(REMOVE) $(CPPSRCARM:.cpp=.s)
# Create output files directory
# all known MS Windows OS define the ComSpec environment variable
ifdef ComSpec
$(shell md $(subst /,\\,$(OUTDIR)) 2>NUL)
else
$(shell mkdir -p $(OUTDIR) 2>/dev/null)
endif
# Include the dependency files.
ifdef ComSpec
-include $(shell md $(subst /,\\,$(OUTDIR))\dep 2>NUL) $(wildcard $(OUTDIR)/dep/*)
else
-include $(shell mkdir -p $(OUTDIR) 2>/dev/null) $(shell mkdir $(OUTDIR)/dep 2>/dev/null) $(wildcard $(OUTDIR)/dep/*)
endif
# Listing of phony targets.
.PHONY : all build clean clean_list program gencode
Reference in New Issue View Git Blame Copy Permalink