LibrePilot

images

Add help icon to config gadget, had this hanging around for a while, just getting ready for move to Git.

2011-04-17 09:04:09 +00:00

ahrs.ui

OP-371 Update all config dialog buttons to Apply/Save instead of Save to RAM/SD.

2011-04-08 20:17:41 +00:00

airframe.ui

OP-371 Update all config dialog buttons to Apply/Save instead of Save to RAM/SD.

2011-04-08 20:17:41 +00:00

alignment-calibration.cpp

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

assertions.h

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

calibration.h

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

ccattitude.ui

CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS

2011-04-15 06:37:16 +00:00

ccpm.ui

OP-299 Swashplate Levelling UI

2011-02-14 05:46:45 +00:00

Config.pluginspec

CC-39 Have GCS detect whether the board is a CC or an OP, and update the INS calibration widget accordingly.

2011-03-28 21:15:44 +00:00

config.pro

CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS

2011-04-15 06:37:16 +00:00

configahrswidget.cpp

OP-191: Refactor some routines that will be common to both coarse and fine calibraiton;

2011-04-10 18:29:53 +00:00

configahrswidget.h

Fixed problems that blocked compiling on Windows

2011-04-11 10:07:06 +00:00

configairframewidget.cpp

Fix tricopter configuration. 2946 for a second rudder had a bug.

2011-04-11 18:47:50 +00:00

configairframewidget.h

Added 2nd rudder to fixed wing config. This is necessary for flying wings, in particular, that have rudders on the wingtips.

2011-03-03 05:33:51 +00:00

configccattitudewidget.cpp

OP-444 : changed the error message to a QMessageBox as requested.

2011-04-26 18:02:32 +02:00

configccattitudewidget.h

CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS

2011-04-15 06:37:16 +00:00

configccpmwidget.cpp

OP-299 Swashplate Levelling UI

2011-02-14 05:46:45 +00:00

configccpmwidget.h

OP-299 Swashplate Levelling UI

2011-02-14 05:46:45 +00:00

configfactory.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadget.cpp

OP-306 Update all Gadgets so that they destroy their widgets properly when they die.

2011-02-01 23:01:52 +00:00

configgadget.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadget.qrc

Add help icon to config gadget, had this hanging around for a while, just getting ready for move to Git.

2011-04-17 09:04:09 +00:00

configgadgetconfiguration.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetconfiguration.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetfactory.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetfactory.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetoptionspage.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetoptionspage.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configgadgetwidget.cpp

OP-357 Config gadget now checks whether the autopilot is connected already when it is instanciated.

2011-03-31 20:48:43 +00:00

configgadgetwidget.h

CC-39 Have GCS detect whether the board is a CC or an OP, and update the INS calibration widget accordingly.

2011-03-28 21:15:44 +00:00

configinputwidget.cpp

OP-449: Changed message in input configuration to correctly describe situation

2011-04-29 18:00:20 -05:00

configinputwidget.h

OP-347 Implement the option to reverse the input controls on the config gadget: this is mostly useful for people with TX which do not offer this option. Tested on my small hex.

2011-04-03 06:47:07 +00:00

configoutputwidget.cpp

Fixed min/max code error.

2011-04-02 12:49:58 +00:00

configoutputwidget.h

Added the option to link output channels when in "Test Output" mode - useful for testing quads, hexes etc.

2011-04-02 11:58:19 +00:00

configplugin.cpp

Update dialog on configplugin

2011-04-26 19:27:29 +02:00

configplugin.h

Forgot a small change to make sure that in case the request times out, we get an error.

2011-04-26 00:53:37 +02:00

configstabilizationwidget.cpp

OP-146 Max angles can now be adjusted from the stabilization config dialog.

2011-02-25 23:05:23 +00:00

configstabilizationwidget.h

OP-146 Stabilization configuration: can now update stab settings in real time on the airframe, and link roll/pitch for easier adjustment...

2011-02-25 21:17:07 +00:00

configtaskwidget.cpp

OP-349 CC-32: Improved the object save confirmation logic. It's got a lot of

2011-03-29 01:29:56 +00:00

configtaskwidget.h

OP-349 CC-32: Improved the object save confirmation logic. It's got a lot of

2011-03-29 01:29:56 +00:00

configtelemetrywidget.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

configtelemetrywidget.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

defaultattitude.ui

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

defaultattitudewidget.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

defaultattitudewidget.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

fancytabwidget.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

fancytabwidget.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

gyro-calibration.cpp

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

input.ui

CC-24: Rotate the CC board at any angle relative to "flat and level" with GCS

2011-04-15 06:37:16 +00:00

legacy-calibration.cpp

OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.

2011-03-21 00:45:40 +00:00

mixercurveline.cpp

build: Move openpilotgcs into its own subdirectory

2011-01-22 17:40:26 +00:00

mixercurveline.h

build: Move openpilotgcs into its own subdirectory

2011-01-22 17:40:26 +00:00

mixercurvepoint.cpp

build: Move openpilotgcs into its own subdirectory

2011-01-22 17:40:26 +00:00

mixercurvepoint.h

build: Move openpilotgcs into its own subdirectory

2011-01-22 17:40:26 +00:00

mixercurvewidget.cpp

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

mixercurvewidget.h

CC-33 Now the config panel only shows the relevant panel once the board is connected.

2011-03-29 20:32:09 +00:00

output.ui

OP-371 Update all config dialog buttons to Apply/Save instead of Save to RAM/SD.

2011-04-08 20:17:41 +00:00

stabilization.ui

OP-371 Update all config dialog buttons to Apply/Save instead of Save to RAM/SD.

2011-04-08 20:17:41 +00:00

telemetry.ui

OP-371 Update all config dialog buttons to Apply/Save instead of Save to RAM/SD.

2011-04-08 20:17:41 +00:00

twostep.cpp

Fixed problems that blocked compiling on Windows

2011-04-11 10:07:06 +00:00

vernier.ui

OP-146 Stabilization config interface: this is a work in progress, and a pure mock-up of the UI, I would like feedback.

2011-02-22 22:03:32 +00:00