Brian Webb 61c453f6ff Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only.		2013-06-26 17:59:33 -07:00
..
libraries	OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.	2013-06-26 17:56:56 -07:00
modules	OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.	2013-06-26 17:58:02 -07:00
pios	Removes several of the air datarate settings, and fine tunes the calculation of the max packet length from the datarate and packet time. 9600, 19200, 36400, and 57600 modes tested. Tested 19200 in one-way mode for PPM only.	2013-06-26 17:59:33 -07:00
Project	Update Windows USB driver file	2013-06-03 16:39:41 +03:00
targets	OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.	2013-06-26 17:57:11 -07:00
templates	OP-770: add/rename some version-info.py template variables	2013-05-25 23:02:29 +02:00
tests/logfs	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
uavobjects	Bugfix in UAVObjectmanager. LoadFromFile() is not allowed to use GetByID since its called from Register, where the uavobject is not registered yet.	2013-06-06 21:22:17 +02:00
uavtalk	OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.	2013-06-26 17:58:02 -07:00
.gitattributes	Update flight/.gitattributes to include *.template files	2013-04-30 22:15:58 +02:00