Brian Webb f8d60e6dee OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.		2013-06-26 17:58:02 -07:00
..
Actuator	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
Airspeed/revolution	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
Altitude	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
AltitudeHold	OP-1019 add a simple altitude hold	2013-06-20 11:27:45 +02:00
Attitude	Keep TODO comment.	2013-06-20 14:35:40 +02:00
Autotune	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
Battery	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
CallbackTest	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
CameraStab	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
ComUsbBridge	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
Example	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
Extensions/MagBaro	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
Fault	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
FirmwareIAP	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
FixedWingPathFollower	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
FlightPlan	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
GPS	GPS module is builtin so there is no way to shut the gps alarm when gps is not used.	2013-06-15 16:39:29 +02:00
ManualControl	OP-1019 fix sanitychecks and other uavo definition sanity checks for the newly defined altitudevario mode	2013-06-20 19:39:19 +02:00
MK/MKSerial	Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES	2013-05-19 17:37:30 +03:00
OPLink	OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.	2013-06-26 17:56:56 -07:00
Osd	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
OveroSync	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
PathPlanner	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
RadioComBridge	OP-932 Replaces the RFM22B PPM/receiver code with an OPLinkReceiver UAVObject. This object is generated on a coordinator OPLink, and is used by both the OPLink to generate PPM output, and the OPLinkReceiver on the Revo.	2013-06-26 17:57:11 -07:00
Sensors	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
Stabilization	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
System	OP-932 A significant re-work of the OPLink and configuration of the OPLink. Auto-configuration is removed, and remote modems are bound the coordinator, rather than the other way around. Timing of the radio link is also significantly changed. The rfm22b code is also simplified so that it only sends packet, and has no notion about what those packets are, so the rfm22b is converteded to simply a com type device.	2013-06-26 17:56:56 -07:00
Telemetry	OP-932 Adds additional thread and UAVTalk connection to the telemetry module that reads from the uart/radio link on the Revo. This allows the Revo to read OAVObjects over both the uart/radio link and the USB link at the same time. Unfortunately, there's no way to know which link to send UAVObjects out on, so all UAVObjects go to the USB port if USB is connected. This allows UAVObjects to be received from the OPLink radio, even when USB is connected.	2013-06-26 17:58:02 -07:00
TxPID	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00
VtolPathFollower	OP-976: Add the ';' back	2013-06-03 20:37:40 -07:00