1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-11-30 08:24:11 +01:00
LibrePilot/flight/Revolution/System/inc/pios_config.h
James Cotton 836e34a483 Change revo sensors to update at 500 Hz and make sure in all cases it waits for
the relevant queue to provide data.  Also disable the quaternion stabilization
flag.
2012-05-12 13:12:56 -05:00

118 lines
3.6 KiB
C

/**
******************************************************************************
* @addtogroup OpenPilotSystem OpenPilot System
* @{
* @addtogroup OpenPilotCore OpenPilot Core
* @{
*
* @file pios_config.h
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* @brief PiOS configuration header.
* Central compile time config for the project.
* In particular, pios_config.h is where you define which PiOS libraries
* and features are included in the firmware.
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PIOS_CONFIG_H
#define PIOS_CONFIG_H
/* Major features */
#define PIOS_INCLUDE_FREERTOS
#define PIOS_INCLUDE_BL_HELPER
/* Enable/Disable PiOS Modules */
//#define PIOS_INCLUDE_ADC
#define PIOS_INCLUDE_DELAY
#define PIOS_INCLUDE_I2C
#define PIOS_INCLUDE_IRQ
#define PIOS_INCLUDE_LED
#define PIOS_INCLUDE_IAP
#define PIOS_INCLUDE_SERVO
#define PIOS_INCLUDE_SPI
#define PIOS_INCLUDE_SYS
#define PIOS_INCLUDE_USART
#define PIOS_INCLUDE_USB
#define PIOS_INCLUDE_USB_HID
//#define PIOS_INCLUDE_GPIO
#define PIOS_INCLUDE_EXTI
#define PIOS_INCLUDE_RTC
#define PIOS_INCLUDE_WDG
/* Select the sensors to include */
#define PIOS_INCLUDE_BMA180
#define PIOS_INCLUDE_HMC5883
#define PIOS_INCLUDE_MPU6000
#define PIOS_MPU6000_ACCEL
#define PIOS_INCLUDE_L3GD20
#define PIOS_INCLUDE_MS5611
//#define PIOS_INCLUDE_HCSR04
#define PIOS_FLASH_ON_ACCEL /* true for second revo */
#define FLASH_FREERTOS
/* Com systems to include */
#define PIOS_INCLUDE_COM
#define PIOS_INCLUDE_COM_TELEM
#define PIOS_INCLUDE_COM_AUX
#define PIOS_INCLUDE_COM_AUXSBUS
#define PIOS_INCLUDE_COM_FLEXI
#define PIOS_INCLUDE_GPS
#define PIOS_OVERO_SPI
/* Supported receiver interfaces */
#define PIOS_INCLUDE_RCVR
#define PIOS_INCLUDE_DSM
//#define PIOS_INCLUDE_SBUS
#define PIOS_INCLUDE_PPM
#define PIOS_INCLUDE_PWM
//#define PIOS_INCLUDE_GCSRCVR
#define PIOS_INCLUDE_SETTINGS
#define PIOS_INCLUDE_FLASH
/* A really shitty setting saving implementation */
#define PIOS_INCLUDE_FLASH_SECTOR_SETTINGS
/* Other Interfaces */
//#define PIOS_INCLUDE_I2C_ESC
/* Flags that alter behaviors - mostly to lower resources for CC */
#define PIOS_INCLUDE_INITCALL /* Include init call structures */
#define PIOS_TELEM_PRIORITY_QUEUE /* Enable a priority queue in telemetry */
//#define PIOS_QUATERNION_STABILIZATION /* Stabilization options */
#define PIOS_GPS_SETS_HOMELOCATION /* GPS options */
/* Alarm Thresholds */
#define HEAP_LIMIT_WARNING 1000
#define HEAP_LIMIT_CRITICAL 500
#define IRQSTACK_LIMIT_WARNING 150
#define IRQSTACK_LIMIT_CRITICAL 80
#define CPULOAD_LIMIT_WARNING 80
#define CPULOAD_LIMIT_CRITICAL 95
// This actually needs calibrating
#define IDLE_COUNTS_PER_SEC_AT_NO_LOAD (8379692)
#define REVOLUTION
#endif /* PIOS_CONFIG_H */
/**
* @}
* @}
*/