Oleg Semyonov aeda61d252 usart: serial telemetry can be disabled to free USART ... It was tested being merged with OP-472_CorvusCorax_CopterControl-Guidance_v3 branch, Spektrum on USART3 and GPS on USART1 and seems to work. Currently defaults mimic original behavior, that is, if USE_SPEKTRUM is not defined - define USE_PWM and USE_GPS. Thsi should be refactored later to make it configurable from the Makefile. Also it was not ported to the OP MB: it currently does not support the S.Bus hardware and still has original behavior with the patch. But this is one more step to dynamic configuration of ports.		2011-06-16 15:06:01 +03:00
..
pios_adxl345.c	hwinit: Convert SPI drivers to dynamic init	2011-02-12 22:19:50 +00:00
pios_bl_helper.c	build: Make all flight sw use pios_board_info_blob	2011-05-24 00:58:10 -04:00
pios_bma180.c	OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware.	2011-04-14 12:46:39 +00:00
pios_bmp085.c	OP-377 PiOS/BMP085 - Update BMP085 driver to be FreeRTOS agnostic. This is required since new INS does not run FreeRTOS.	2011-04-14 09:46:23 +00:00
pios_board_info.c	build: add support for EE bank on pipx boards	2011-05-24 01:10:40 -04:00
pios_com.c	usart: serial telemetry can be disabled to free USART	2011-06-16 15:06:01 +03:00
pios_crc.c	OP-152: Abstract the CRC code out of uavtalk to allow it to be reused (PT -	2011-06-04 18:36:26 -05:00
pios_flash_w25x.c	OP-216: Improved error handling	2011-05-14 14:28:11 -05:00
pios_flashfs_objlist.c	OP-452: Made the CRC calculation run in chunks to balance efficiency and ram	2011-06-05 09:05:59 -05:00
pios_hcsr04.c	sbus: provide a stub based on Spektrum driver (for CC only)	2011-06-15 22:35:21 +03:00
pios_hmc5843.c	Flight/PiOS: Whitespace changes	2010-09-27 07:28:45 +00:00
pios_hmc5883.c	OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware.	2011-04-14 12:46:39 +00:00
pios_i2c_esc.c	OP-237 I2C ESC support. This _will_ require you to reconfigure your	2011-01-10 01:11:44 +00:00
pios_iap.c	OP-21/Bootloader - Changes to the IAPObject. Implements MB and AHRS user mode IAPObject. Added user mode reset command to the CLI. To many changes to bootloading system to write here, a Wiki page will have to be writen.	2010-12-15 19:06:28 +00:00
pios_imu3000.c	OP-378 - OP/INS - Add initial support for INS. HMC5883, BMP085, BMA180, IMU300 all added. Throrough verification has not been done on any of them. main() simply calls self-test functions on all of the hardware.	2011-04-14 12:46:39 +00:00
pios_opahrs_proto.c	Flight/PiOS: Whitespace changes	2010-09-27 07:28:45 +00:00
pios_opahrs_v0.c	bl_openpilot: bind to new COM, USART and SPI drivers	2011-02-14 01:17:32 +00:00
pios_opahrs.c	Flight/PiOS: Whitespace changes	2010-09-27 07:28:45 +00:00
pios_sdcard.c	hwinit: Convert SPI drivers to dynamic init	2011-02-12 22:19:50 +00:00
printf-stdarg.c	Flight/PiOS: Whitespace changes	2010-09-27 07:28:45 +00:00