Alessio Morale a0d68c6afb OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed ...

Note: Counter 0xA3450001 is the time it takes to transfer the requested number of samples

2014-06-08 21:33:18 +02:00

..

libraries

OP-1079 - Update to FreeRTOS v7.5.2

2013-09-04 20:26:23 -07:00

pios_adxl345.c

OP-1227 Fix high CPU usage: Reduce Accel rate to 1600Hz, optimize sample reading, explicitly set bus speed

2014-06-08 21:33:18 +02:00

pios_bma180.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_bmp085.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_board_info.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_callbackscheduler.c

OP-1294 Resize stack for CallbackScheduler.

2014-04-07 00:31:48 +02:00

pios_com_msg.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_com.c

OP-1218 Raise time PIOS_COM_SendBuffer waits to acquire sendbuffer semaphore

2014-02-15 22:05:56 +01:00

pios_crc.c

OP-1122 OP-1158 added facility to update a CRC with uavobject data (flight side)

2014-01-12 15:12:41 +01:00

pios_debuglog.c

Just uncrustification

2013-11-26 00:43:02 +01:00

pios_deltatime.c

OP-1211 removed unneeded define

2014-02-06 19:34:34 +01:00

pios_dosfs_logfs.c

Make use of (now supported) standard snprintf in stdarg-printf when used in logfs

2013-11-17 02:49:53 +01:00

pios_etasv3.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_flash_jedec.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_flashfs_logfs.c

Uncrustify

2013-06-18 20:23:46 +02:00

pios_gcsrcvr.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_hcsr04.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_hmc5843.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_hmc5883.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_i2c_esc.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_iap.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_instrumentation.c

OP-1365 Flight code instrumentation API: Add CopterControl support

2014-06-07 00:47:06 +02:00

pios_l3gd20.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_led.c

Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.

2013-07-28 07:01:08 -07:00

pios_mpu6000.c

OP-1049: Hotfix to 13.06.02 for MPU6000 FIFO overflow on CC3D when board initialisation takes

2013-07-28 01:16:22 +09:30

pios_mpxv.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_ms4525do.c

OP-1273 OP-1282 OP-1283 uncrustify

2014-03-31 22:17:58 +02:00

pios_ms5611.c

OP-1149 change POW2 as POW2(0) led to undefined results

2014-02-09 12:05:40 +01:00

pios_notify.c

OP-1302 Add a stub pios_notify API for user interaction/notifications

2014-04-13 17:42:57 +02:00

pios_oplinkrcvr.c

OP-932: Adds an oplink receiver device, which is based on the gcs receiver device, but uses the OPLinkReceiver UAVObject. The OPLinkReceiver packets are generated on the OPLink modem.

2013-06-26 17:56:20 -07:00

pios_rcvr.c

OP-932 Adds a semaphore to PPM input to signal when a new frame has been received. This can be used to process a new frame with as low a latency as possible.

2013-06-26 17:56:10 -07:00

pios_rfm22b_com.c

OP-932 Adds a direct PPM channel on each Tx packet when in PPM mode, and adds a PPM only mode that uses a 9600 bps air datarate. Also updates the OPLink configuration tab and moves all OPLink configuration to the OPLink configuration tab on the Revo, and customizes the OPLink configuration tab for the Revo.

2013-06-26 18:01:54 -07:00

pios_rfm22b.c

OP-1033 pios_rfm22b.c will not be messed up by uncrustify anymore :)

2014-04-09 09:06:18 +02:00

pios_sbus.c

Adding R7008SB end byte as a possible end of frame check for S.Bus

2014-01-03 18:25:44 +01:00

pios_sdcard.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_task_monitor.c

OP-1026 fix review issues

2014-03-09 16:08:27 +01:00

pios_usb_desc_hid_cdc.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_desc_hid_only.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_usb_util.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_video.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00

pios_wavplay.c

Reformat source code with 'make uncrustify_all' run twice. NO CODE CHANGES

2013-05-19 17:37:30 +03:00