1
0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
LibrePilot/flight/PiOS/STM32F10x/pios_i2c.c

792 lines
26 KiB
C
Raw Normal View History

/**
******************************************************************************
* @addtogroup PIOS PIOS Core hardware abstraction layer
* @{
* @addtogroup PIOS_I2C I2C Functions
* @brief STM32 Hardware dependent I2C functionality
* @{
*
* @file pios_i2c.c
* @author The OpenPilot Team, http://www.openpilot.org Copyright (C) 2010.
* Parts by Thorsten Klose (tk@midibox.org) (tk@midibox.org)
* @brief I2C Enable/Disable routines
* @see The GNU Public License (GPL) Version 3
*
*****************************************************************************/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Project Includes */
#include "pios.h"
#if defined(PIOS_INCLUDE_I2C)
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
#if defined(PIOS_INCLUDE_FREERTOS)
#define USE_FREERTOS
#endif
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
#include <pios_i2c_priv.h>
enum i2c_adapter_event {
I2C_EVENT_START,
I2C_EVENT_STARTED_MORE_TXN_READ,
I2C_EVENT_STARTED_MORE_TXN_WRITE,
I2C_EVENT_STARTED_LAST_TXN_READ,
I2C_EVENT_STARTED_LAST_TXN_WRITE,
I2C_EVENT_ADDR_SENT_LEN_EQ_0,
I2C_EVENT_ADDR_SENT_LEN_EQ_1,
I2C_EVENT_ADDR_SENT_LEN_EQ_2,
I2C_EVENT_ADDR_SENT_LEN_GT_2,
I2C_EVENT_TRANSFER_DONE_LEN_EQ_0,
I2C_EVENT_TRANSFER_DONE_LEN_EQ_1,
I2C_EVENT_TRANSFER_DONE_LEN_EQ_2,
I2C_EVENT_TRANSFER_DONE_LEN_GT_2,
I2C_EVENT_AUTO, /* FIXME: remove this */
I2C_EVENT_NUM_EVENTS /* Must be last */
};
static void go_faulted (struct pios_i2c_adapter * i2c_adapter);
static void go_stopping (struct pios_i2c_adapter * i2c_adapter);
static void go_stopped (struct pios_i2c_adapter * i2c_adapter);
static void go_starting (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_addr (struct pios_i2c_adapter * i2c_adapter);
static void go_r_more_txn_pre_one (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_pre_first (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_pre_middle (struct pios_i2c_adapter * i2c_adapter);
static void go_r_more_txn_pre_last (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_post_last (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_addr (struct pios_i2c_adapter * i2c_adapter);
static void go_r_last_txn_pre_one (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_pre_first (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_pre_middle (struct pios_i2c_adapter * i2c_adapter);
static void go_r_last_txn_pre_last (struct pios_i2c_adapter * i2c_adapter);
static void go_r_any_txn_post_last (struct pios_i2c_adapter * i2c_adapter);
static void go_w_any_txn_addr (struct pios_i2c_adapter * i2c_adapter);
static void go_w_any_txn_middle (struct pios_i2c_adapter * i2c_adapter);
static void go_w_more_txn_last (struct pios_i2c_adapter * i2c_adapter);
static void go_w_any_txn_addr (struct pios_i2c_adapter * i2c_adapter);
static void go_w_any_txn_middle (struct pios_i2c_adapter * i2c_adapter);
static void go_w_last_txn_last (struct pios_i2c_adapter * i2c_adapter);
struct i2c_adapter_transition {
void (*entry_fn)(struct pios_i2c_adapter * i2c_adapter);
enum i2c_adapter_state next_state[I2C_EVENT_NUM_EVENTS];
};
static void i2c_adapter_inject_event(struct pios_i2c_adapter * i2c_adapter, enum i2c_adapter_event event);
static void i2c_adapter_fsm_init(struct pios_i2c_adapter * i2c_adapter);
const static struct i2c_adapter_transition i2c_adapter_transitions[I2C_STATE_NUM_STATES] = {
[I2C_STATE_FAULTED] = {
.entry_fn = go_faulted,
},
[I2C_STATE_STOPPED] = {
.entry_fn = go_stopped,
.next_state = {
[I2C_EVENT_START] = I2C_STATE_STARTING,
},
},
[I2C_STATE_STOPPING] = {
.entry_fn = go_stopping,
.next_state = {
[I2C_EVENT_AUTO] = I2C_STATE_STOPPED,
},
},
[I2C_STATE_STARTING] = {
.entry_fn = go_starting,
.next_state = {
[I2C_EVENT_STARTED_MORE_TXN_READ] = I2C_STATE_R_MORE_TXN_ADDR,
[I2C_EVENT_STARTED_MORE_TXN_WRITE] = I2C_STATE_W_MORE_TXN_ADDR,
[I2C_EVENT_STARTED_LAST_TXN_READ] = I2C_STATE_R_LAST_TXN_ADDR,
[I2C_EVENT_STARTED_LAST_TXN_WRITE] = I2C_STATE_W_LAST_TXN_ADDR,
},
},
/*
* Read with restart
*/
[I2C_STATE_R_MORE_TXN_ADDR] = {
.entry_fn = go_r_any_txn_addr,
.next_state = {
[I2C_EVENT_ADDR_SENT_LEN_EQ_1] = I2C_STATE_R_MORE_TXN_PRE_ONE,
[I2C_EVENT_ADDR_SENT_LEN_EQ_2] = I2C_STATE_R_MORE_TXN_PRE_LAST,
[I2C_EVENT_ADDR_SENT_LEN_GT_2] = I2C_STATE_R_MORE_TXN_PRE_FIRST,
},
},
[I2C_STATE_R_MORE_TXN_PRE_ONE] = {
.entry_fn = go_r_more_txn_pre_one,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_1] = I2C_STATE_R_MORE_TXN_POST_LAST,
},
},
[I2C_STATE_R_MORE_TXN_PRE_FIRST] = {
.entry_fn = go_r_any_txn_pre_first,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_2] = I2C_STATE_R_MORE_TXN_PRE_LAST,
[I2C_EVENT_TRANSFER_DONE_LEN_GT_2] = I2C_STATE_R_MORE_TXN_PRE_MIDDLE,
},
},
[I2C_STATE_R_MORE_TXN_PRE_MIDDLE] = {
.entry_fn = go_r_any_txn_pre_middle,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_2] = I2C_STATE_R_MORE_TXN_PRE_LAST,
[I2C_EVENT_TRANSFER_DONE_LEN_GT_2] = I2C_STATE_R_MORE_TXN_PRE_MIDDLE,
},
},
[I2C_STATE_R_MORE_TXN_PRE_LAST] = {
.entry_fn = go_r_more_txn_pre_last,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_1] = I2C_STATE_R_MORE_TXN_POST_LAST,
},
},
[I2C_STATE_R_MORE_TXN_POST_LAST] = {
.entry_fn = go_r_any_txn_post_last,
.next_state = {
[I2C_EVENT_AUTO] = I2C_STATE_STARTING,
},
},
/*
* Read
*/
[I2C_STATE_R_LAST_TXN_ADDR] = {
.entry_fn = go_r_any_txn_addr,
.next_state = {
[I2C_EVENT_ADDR_SENT_LEN_EQ_1] = I2C_STATE_R_LAST_TXN_PRE_ONE,
[I2C_EVENT_ADDR_SENT_LEN_EQ_2] = I2C_STATE_R_LAST_TXN_PRE_FIRST,
[I2C_EVENT_ADDR_SENT_LEN_GT_2] = I2C_STATE_R_LAST_TXN_PRE_FIRST,
},
},
[I2C_STATE_R_LAST_TXN_PRE_ONE] = {
.entry_fn = go_r_last_txn_pre_one,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_1] = I2C_STATE_R_LAST_TXN_POST_LAST,
},
},
[I2C_STATE_R_LAST_TXN_PRE_FIRST] = {
.entry_fn = go_r_any_txn_pre_first,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_2] = I2C_STATE_R_LAST_TXN_PRE_LAST,
[I2C_EVENT_TRANSFER_DONE_LEN_GT_2] = I2C_STATE_R_LAST_TXN_PRE_MIDDLE,
},
},
[I2C_STATE_R_LAST_TXN_PRE_MIDDLE] = {
.entry_fn = go_r_any_txn_pre_middle,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_2] = I2C_STATE_R_LAST_TXN_PRE_LAST,
[I2C_EVENT_TRANSFER_DONE_LEN_GT_2] = I2C_STATE_R_LAST_TXN_PRE_MIDDLE,
},
},
[I2C_STATE_R_LAST_TXN_PRE_LAST] = {
.entry_fn = go_r_last_txn_pre_last,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_1] = I2C_STATE_R_LAST_TXN_POST_LAST,
},
},
[I2C_STATE_R_LAST_TXN_POST_LAST] = {
.entry_fn = go_r_any_txn_post_last,
.next_state = {
[I2C_EVENT_AUTO] = I2C_STATE_STOPPING,
},
},
/*
* Write with restart
*/
[I2C_STATE_W_MORE_TXN_ADDR] = {
.entry_fn = go_w_any_txn_addr,
.next_state = {
[I2C_EVENT_ADDR_SENT_LEN_EQ_1] = I2C_STATE_W_MORE_TXN_LAST,
[I2C_EVENT_ADDR_SENT_LEN_EQ_2] = I2C_STATE_W_MORE_TXN_MIDDLE,
[I2C_EVENT_ADDR_SENT_LEN_GT_2] = I2C_STATE_W_MORE_TXN_MIDDLE,
},
},
[I2C_STATE_W_MORE_TXN_MIDDLE] = {
.entry_fn = go_w_any_txn_middle,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_1] = I2C_STATE_W_MORE_TXN_LAST,
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_2] = I2C_STATE_W_MORE_TXN_MIDDLE,
[I2C_EVENT_TRANSFER_DONE_LEN_GT_2] = I2C_STATE_W_MORE_TXN_MIDDLE,
},
},
[I2C_STATE_W_MORE_TXN_LAST] = {
.entry_fn = go_w_more_txn_last,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_0] = I2C_STATE_STARTING,
},
},
/*
* Write
*/
[I2C_STATE_W_LAST_TXN_ADDR] = {
.entry_fn = go_w_any_txn_addr,
.next_state = {
[I2C_EVENT_ADDR_SENT_LEN_EQ_1] = I2C_STATE_W_LAST_TXN_LAST,
[I2C_EVENT_ADDR_SENT_LEN_EQ_2] = I2C_STATE_W_LAST_TXN_MIDDLE,
[I2C_EVENT_ADDR_SENT_LEN_GT_2] = I2C_STATE_W_LAST_TXN_MIDDLE,
},
},
[I2C_STATE_W_LAST_TXN_MIDDLE] = {
.entry_fn = go_w_any_txn_middle,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_1] = I2C_STATE_W_LAST_TXN_LAST,
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_2] = I2C_STATE_W_LAST_TXN_MIDDLE,
[I2C_EVENT_TRANSFER_DONE_LEN_GT_2] = I2C_STATE_W_LAST_TXN_MIDDLE,
},
},
[I2C_STATE_W_LAST_TXN_LAST] = {
.entry_fn = go_w_last_txn_last,
.next_state = {
[I2C_EVENT_TRANSFER_DONE_LEN_EQ_0] = I2C_STATE_STOPPING,
},
},
};
static void go_faulted (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(0);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_stopping (struct pios_i2c_adapter * i2c_adapter)
{
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR, DISABLE);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Spin waiting for the stop bit to be cleared before continuing */
#define I2C_CR1_STOP_REQUESTED 0x0200
while (i2c_adapter->cfg->regs->CR1 & I2C_CR1_STOP_REQUESTED);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_stopped (struct pios_i2c_adapter * i2c_adapter)
{
#ifdef USE_FREERTOS
signed portBASE_TYPE pxHigherPriorityTaskWoken = pdFALSE;
#endif
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR, DISABLE);
I2C_AcknowledgeConfig(i2c_adapter->cfg->regs, ENABLE);
#ifdef USE_FREERTOS
if (xSemaphoreGiveFromISR(i2c_adapter->sem_ready, &pxHigherPriorityTaskWoken) != pdTRUE) {
PIOS_DEBUG_Assert(0);
}
portEND_SWITCHING_ISR(pxHigherPriorityTaskWoken); /* FIXME: is this the right place for this? */
#endif /* USE_FREERTOS */
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_starting (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(i2c_adapter->active_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn >= i2c_adapter->first_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
i2c_adapter->active_byte = &(i2c_adapter->active_txn->buf[0]);
i2c_adapter->last_byte = &(i2c_adapter->active_txn->buf[i2c_adapter->active_txn->len - 1]);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
I2C_GenerateSTART(i2c_adapter->cfg->regs, ENABLE);
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR, ENABLE);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Common to 'more' and 'last' transaction */
static void go_r_any_txn_addr (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(i2c_adapter->active_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn >= i2c_adapter->first_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_DEBUG_Assert(i2c_adapter->active_txn->rw == PIOS_I2C_TXN_READ);
I2C_Send7bitAddress(i2c_adapter->cfg->regs, (i2c_adapter->active_txn->addr)<<1, I2C_Direction_Receiver);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_r_more_txn_pre_one (struct pios_i2c_adapter * i2c_adapter)
{
I2C_AcknowledgeConfig(i2c_adapter->cfg->regs, DISABLE);
I2C_GenerateSTART(i2c_adapter->cfg->regs, ENABLE);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_r_last_txn_pre_one (struct pios_i2c_adapter * i2c_adapter)
{
I2C_AcknowledgeConfig(i2c_adapter->cfg->regs, DISABLE);
I2C_GenerateSTOP(i2c_adapter->cfg->regs, ENABLE);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Common to 'more' and 'last' transaction */
static void go_r_any_txn_pre_first (struct pios_i2c_adapter * i2c_adapter)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
I2C_AcknowledgeConfig(i2c_adapter->cfg->regs, ENABLE);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Common to 'more' and 'last' transaction */
static void go_r_any_txn_pre_middle (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(i2c_adapter->active_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_byte <= i2c_adapter->last_byte);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
*(i2c_adapter->active_byte) = I2C_ReceiveData(i2c_adapter->cfg->regs);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Move to the next byte */
i2c_adapter->active_byte++;
PIOS_DEBUG_Assert(i2c_adapter->active_byte <= i2c_adapter->last_byte);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_r_more_txn_pre_last (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(i2c_adapter->active_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_byte <= i2c_adapter->last_byte);
I2C_AcknowledgeConfig(i2c_adapter->cfg->regs, DISABLE);
PIOS_IRQ_Disable();
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR, DISABLE);
I2C_GenerateSTART(i2c_adapter->cfg->regs, ENABLE);
*(i2c_adapter->active_byte) = I2C_ReceiveData(i2c_adapter->cfg->regs);
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR, ENABLE);
PIOS_IRQ_Enable();
/* Move to the next byte */
i2c_adapter->active_byte++;
PIOS_DEBUG_Assert(i2c_adapter->active_byte <= i2c_adapter->last_byte);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_r_last_txn_pre_last (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(i2c_adapter->active_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_byte <= i2c_adapter->last_byte);
I2C_AcknowledgeConfig(i2c_adapter->cfg->regs, DISABLE);
PIOS_IRQ_Disable();
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR, DISABLE);
I2C_GenerateSTOP(i2c_adapter->cfg->regs, ENABLE);
*(i2c_adapter->active_byte) = I2C_ReceiveData(i2c_adapter->cfg->regs);
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR, ENABLE);
PIOS_IRQ_Enable();
/* Move to the next byte */
i2c_adapter->active_byte++;
PIOS_DEBUG_Assert(i2c_adapter->active_byte <= i2c_adapter->last_byte);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Common to 'more' and 'last' transaction */
static void go_r_any_txn_post_last (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(i2c_adapter->active_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_byte == i2c_adapter->last_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn >= i2c_adapter->first_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
*(i2c_adapter->active_byte) = I2C_ReceiveData(i2c_adapter->cfg->regs);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Move to the next byte */
i2c_adapter->active_byte++;
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Move to the next transaction */
i2c_adapter->active_txn++;
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Common to 'more' and 'last' transaction */
static void go_w_any_txn_addr (struct pios_i2c_adapter * i2c_adapter)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_DEBUG_Assert(i2c_adapter->active_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn >= i2c_adapter->first_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_DEBUG_Assert(i2c_adapter->active_txn->rw == PIOS_I2C_TXN_WRITE);
I2C_Send7bitAddress(i2c_adapter->cfg->regs, (i2c_adapter->active_txn->addr)<<1, I2C_Direction_Transmitter);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_w_any_txn_middle (struct pios_i2c_adapter * i2c_adapter)
{
PIOS_DEBUG_Assert(i2c_adapter->active_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_byte < i2c_adapter->last_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn >= i2c_adapter->first_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
I2C_SendData(i2c_adapter->cfg->regs, *(i2c_adapter->active_byte));
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Move to the next byte */
i2c_adapter->active_byte++;
PIOS_DEBUG_Assert(i2c_adapter->active_byte <= i2c_adapter->last_byte);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_w_more_txn_last (struct pios_i2c_adapter * i2c_adapter)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_DEBUG_Assert(i2c_adapter->active_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_byte == i2c_adapter->last_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn >= i2c_adapter->first_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
I2C_SendData(i2c_adapter->cfg->regs, *(i2c_adapter->active_byte));
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Move to the next byte */
i2c_adapter->active_byte++;
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Move to the next transaction */
i2c_adapter->active_txn++;
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void go_w_last_txn_last (struct pios_i2c_adapter * i2c_adapter)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_DEBUG_Assert(i2c_adapter->active_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_byte == i2c_adapter->last_byte);
PIOS_DEBUG_Assert(i2c_adapter->active_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn >= i2c_adapter->first_txn);
PIOS_DEBUG_Assert(i2c_adapter->active_txn <= i2c_adapter->last_txn);
I2C_ITConfig(i2c_adapter->cfg->regs, I2C_IT_BUF, DISABLE);
I2C_SendData(i2c_adapter->cfg->regs, *(i2c_adapter->active_byte));
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
// SHOULD MOVE THIS INTO A STOPPING STATE AND SET IT ONLY AFTER THE BYTE WAS SENT
I2C_GenerateSTOP(i2c_adapter->cfg->regs, ENABLE);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Move to the next byte */
i2c_adapter->active_byte++;
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void i2c_adapter_inject_event(struct pios_i2c_adapter * i2c_adapter, enum i2c_adapter_event event)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_IRQ_Disable();
/*
* Move to the next state
*
* This is done prior to calling the new state's entry function to
* guarantee that the entry function never depends on the previous
* state. This way, it cannot ever know what the previous state was.
*/
enum i2c_adapter_state prev_state = i2c_adapter->curr_state;
if (prev_state);
i2c_adapter->curr_state = i2c_adapter_transitions[i2c_adapter->curr_state].next_state[event];
/* Call the entry function (if any) for the next state. */
if (i2c_adapter_transitions[i2c_adapter->curr_state].entry_fn) {
i2c_adapter_transitions[i2c_adapter->curr_state].entry_fn(i2c_adapter);
}
PIOS_IRQ_Enable();
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void i2c_adapter_process_auto(struct pios_i2c_adapter * i2c_adapter)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_IRQ_Disable();
enum i2c_adapter_state prev_state = i2c_adapter->curr_state;
if (prev_state);
while (i2c_adapter_transitions[i2c_adapter->curr_state].next_state[I2C_EVENT_AUTO]) {
i2c_adapter->curr_state = i2c_adapter_transitions[i2c_adapter->curr_state].next_state[I2C_EVENT_AUTO];
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Call the entry function (if any) for the next state. */
if (i2c_adapter_transitions[i2c_adapter->curr_state].entry_fn) {
i2c_adapter_transitions[i2c_adapter->curr_state].entry_fn(i2c_adapter);
}
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_IRQ_Enable();
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static void i2c_adapter_fsm_init(struct pios_i2c_adapter * i2c_adapter)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
i2c_adapter->curr_state = I2C_STATE_STOPPED;
//go_stopped(i2c_adapter);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
#include <pios_i2c_priv.h>
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
static struct pios_i2c_adapter * find_i2c_adapter_by_id (uint8_t adapter)
{
if (adapter >= pios_i2c_num_adapters) {
/* Undefined I2C adapter for this board (see pios_board.c) */
return NULL;
}
/* Get a handle for the device configuration */
return &(pios_i2c_adapters[adapter]);
}
/**
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
* Initializes IIC driver
* \param[in] mode currently only mode 0 supported
* \return < 0 if initialisation failed
*/
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
int32_t PIOS_I2C_Init(void)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
struct pios_i2c_adapter * i2c_adapter;
for (uint8_t i = 0; i < pios_i2c_num_adapters; i++) {
/* Get a handle for the device configuration */
i2c_adapter = find_i2c_adapter_by_id(i);
PIOS_DEBUG_Assert(i2c_adapter);
#ifdef USE_FREERTOS
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/*
* Must be done prior to calling i2c_adapter_fsm_init()
* since the sem_ready mutex is used in the initial state.
*/
vSemaphoreCreateBinary(i2c_adapter->sem_ready);
i2c_adapter->sem_busy = xSemaphoreCreateMutex();
#endif // USE_FREERTOS
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Initialize the state machine */
i2c_adapter_fsm_init(i2c_adapter);
/* Initialize the GPIO pins */
GPIO_Init(i2c_adapter->cfg->scl.gpio, &(i2c_adapter->cfg->scl.init));
GPIO_Init(i2c_adapter->cfg->sda.gpio, &(i2c_adapter->cfg->sda.init));
/* Enable the associated peripheral clock */
switch ((uint32_t)i2c_adapter->cfg->regs) {
case (uint32_t)I2C1:
/* Enable I2C peripheral clock (APB1 == slow speed) */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1, ENABLE);
break;
case (uint32_t)I2C2:
/* Enable I2C peripheral clock (APB1 == slow speed) */
RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C2, ENABLE);
break;
}
#if 0 /* FIXME: is this reset necessary? Should it be done in the stopped state? */
/* Reset the I2C block */
I2C_SoftwareResetCmd(i2c_adapter->cfg->regs, ENABLE);
I2C_SoftwareResetCmd(i2c_adapter->cfg->regs, DISABLE);
#endif
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Reset the I2C block */
I2C_DeInit(i2c_adapter->cfg->regs);
/* Initialize the I2C block */
I2C_Init(i2c_adapter->cfg->regs, &(i2c_adapter->cfg->init));
#if 1 /* FIXME: is this reset necessary? Should it be done in the stopped state? */
#define I2C_BUSY 0x20
if (i2c_adapter->cfg->regs->SR2 & I2C_BUSY) {
/* Reset the I2C block */
I2C_SoftwareResetCmd(i2c_adapter->cfg->regs, ENABLE);
I2C_SoftwareResetCmd(i2c_adapter->cfg->regs, DISABLE);
}
#endif
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Configure and enable I2C interrupts */
NVIC_Init(&(i2c_adapter->cfg->event.init));
NVIC_Init(&(i2c_adapter->cfg->error.init));
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* No error */
return 0;
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
bool PIOS_I2C_Transfer(uint8_t i2c, const struct pios_i2c_txn txn_list[], uint32_t num_txns)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_DEBUG_Assert(txn_list);
PIOS_DEBUG_Assert(num_txns);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
struct pios_i2c_adapter * i2c_adapter;
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
i2c_adapter = find_i2c_adapter_by_id(i2c);
PIOS_DEBUG_Assert(i2c_adapter);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
#ifdef USE_FREERTOS
/* Lock the bus */
xSemaphoreTake(i2c_adapter->sem_busy, portMAX_DELAY);
#endif /* USE_FREERTOS */
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
PIOS_DEBUG_Assert(i2c_adapter->curr_state == I2C_STATE_STOPPED);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
i2c_adapter->first_txn = &txn_list[0];
i2c_adapter->last_txn = &txn_list[num_txns - 1];
i2c_adapter->active_txn = i2c_adapter->first_txn;
#ifdef USE_FREERTOS
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Make sure the done/ready semaphore is consumed before we start */
xSemaphoreTake(i2c_adapter->sem_ready, portMAX_DELAY);
#endif
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_START);
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
/* Wait for the transfer to complete */
#ifdef USE_FREERTOS
xSemaphoreTake(i2c_adapter->sem_ready, portMAX_DELAY);
xSemaphoreGive(i2c_adapter->sem_ready);
#else
/* Spin waiting for the transfer to finish */
while (i2c_adapter->curr_state != I2C_STATE_STOPPED);
#endif /* USE_FREERTOS */
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
#ifdef USE_FREERTOS
/* Unlock the bus */
xSemaphoreGive(i2c_adapter->sem_busy);
#endif /* USE_FREERTOS */
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
return TRUE;
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
#endif
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
void PIOS_I2C_EV_IRQ_Handler(uint8_t i2c)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
struct pios_i2c_adapter * i2c_adapter;
i2c_adapter = find_i2c_adapter_by_id(i2c);
PIOS_DEBUG_Assert(i2c_adapter);
uint32_t event = I2C_GetLastEvent(i2c_adapter->cfg->regs);
switch (event) {
case (I2C_EVENT_MASTER_MODE_SELECT | 0x40):
/* Unexplained event: EV5 + RxNE : Extraneous Rx. Probably a late NACK from previous read. */
/* Clean up the extra Rx until the root cause is identified and just keep going */
(void) I2C_ReceiveData(i2c_adapter->cfg->regs);
/* Fall through */
case I2C_EVENT_MASTER_MODE_SELECT: /* EV5 */
switch (i2c_adapter->active_txn->rw) {
case PIOS_I2C_TXN_READ:
if (i2c_adapter->active_txn == i2c_adapter->last_txn) {
/* Final transaction */
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_STARTED_LAST_TXN_READ);
} else if (i2c_adapter->active_txn < i2c_adapter->last_txn) {
/* More transactions follow */
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_STARTED_MORE_TXN_READ);
} else {
PIOS_DEBUG_Assert(0);
}
break;
case PIOS_I2C_TXN_WRITE:
if (i2c_adapter->active_txn == i2c_adapter->last_txn) {
/* Final transaction */
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_STARTED_LAST_TXN_WRITE);
} else if (i2c_adapter->active_txn < i2c_adapter->last_txn) {
/* More transactions follow */
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_STARTED_MORE_TXN_WRITE);
} else {
PIOS_DEBUG_Assert(0);
}
break;
default:
PIOS_DEBUG_Assert(0);
break;
}
break;
case I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED: /* EV6 */
case I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED: /* EV6 */
switch (i2c_adapter->last_byte - i2c_adapter->active_byte + 1) {
case 0:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_ADDR_SENT_LEN_EQ_0);
break;
case 1:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_ADDR_SENT_LEN_EQ_1);
break;
case 2:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_ADDR_SENT_LEN_EQ_2);
break;
default:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_ADDR_SENT_LEN_GT_2);
break;
}
break;
case 0x80: /* TxE only. TRA + MSL + BUSY have been cleared before we got here. */
/* Ignore */
{
static volatile bool halt = FALSE;
while (halt);
}
break;
case 0: /* Unexplained spurious event. Not sure what to do here. */
case 0x40: /* RxNE only. MSL + BUSY have already been cleared by HW. */
case 0x44: /* RxNE + BTF. MSL + BUSY have already been cleared by HW. */
case I2C_EVENT_MASTER_BYTE_RECEIVED: /* EV7 */
case (I2C_EVENT_MASTER_BYTE_RECEIVED | 0x4): /* EV7 + BTF */
case I2C_EVENT_MASTER_BYTE_TRANSMITTED: /* EV8_2 */
case 0x84: /* TxE + BTF. EV8_2 but TRA + MSL + BUSY have already been cleared by HW. */
switch (i2c_adapter->last_byte - i2c_adapter->active_byte + 1) {
case 0:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_TRANSFER_DONE_LEN_EQ_0);
break;
case 1:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_TRANSFER_DONE_LEN_EQ_1);
break;
case 2:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_TRANSFER_DONE_LEN_EQ_2);
break;
default:
i2c_adapter_inject_event(i2c_adapter, I2C_EVENT_TRANSFER_DONE_LEN_GT_2);
break;
}
break;
case I2C_EVENT_MASTER_BYTE_TRANSMITTING: /* EV8 */
/* Ignore this event and wait for TRANSMITTED in case we can't keep up */
break;
default:
PIOS_DEBUG_Assert(0);
break;
}
i2c_adapter_process_auto(i2c_adapter);
}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
void PIOS_I2C_ER_IRQ_Handler(uint8_t i2c)
{
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
struct pios_i2c_adapter * i2c_adapter;
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
i2c_adapter = find_i2c_adapter_by_id(i2c);
PIOS_DEBUG_Assert(i2c_adapter);
/* Fail hard on any errors for now */
PIOS_DEBUG_Assert(0);
}
/**
* @}
* @}
i2c: rewrite i2c layer The STM32 I2C block has a number of errata associated with it. These errata are primarily related to timing sensitivities between the peripheral and the interrupt handler. In particular, the correct generation of the stop bit relies on the I2C IRQ running immediately and not being held off for any reason. NOTE: The I2C interrupts must be the highest priority IRQs in the system to ensure correct operation. I2C protocol is now implemented as a formal state machine. See: stm32_i2c_fsm.{dot,jpg} for FSM description. I2C init is now expressed by const initializers in pios_board.c for both OP and AHRS boards. I2C device drivers (ie. bmp085/hmc5843) now pass in const arrays of an unlimited number of bus transfers to be done atomically. The I2C adapter driver now handles all bus-level locking across the list of transactions. Generation of start/restart/stop conditions are handled automatically over the list of transactions. Timeouts have been removed from the API for now. May be added back later. This driver has run error free on both the OP and AHRS boards for up to 48hrs but it still sometimes fails earlier than that on the OP board. There is another possible set of improvements to the driver that could employ the DMA engine for transfers of >= 2bytes. This change would reduce the timing sensitivities between the peripheral and the driver but unfortunately, both the SPI and I2C interfaces share the DMA1 engine. That means only one of these two peripherals can use the DMA engine and right now, SPI between OP and AHRS is already using it. Failures are currently fatal and will lock up the CPU. This allows useful information to be obtained in the failure cases. git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1241 ebee16cc-31ac-478f-84a7-5cbb03baadba
2010-08-08 06:15:08 +02:00
*/