LibrePilot/flight/PiOS/STM32F10x/link_STM32103CB_PIPXTREME_memory.ld

MEMORY
{
    BL_FLASH (rx) : ORIGIN = 0x08000000,        LENGTH = 0x03000 - 0x00080
    BD_INFO (r)   : ORIGIN = 0x08003000 - 0x80, LENGTH =           0x00080
    FLASH (rx)    : ORIGIN = 0x08003000,        LENGTH = 0x20000 - 0x03000 - 0x00400
    EE_FLASH (rw) : ORIGIN = 0x0801FC00,        LENGTH = 0x00400
    SRAM (rwx)    : ORIGIN = 0x20000000,        LENGTH = 0x05000
}
build: convert all app loads to require bootloaders This change is made up of a number of tightly coupled changes: - Deprecate the use of the USE_BOOTLOADER command-line option. It is now hard-coded in each Makefile. Overriding it on the command line is not allowed. - Split apart the memory declaration and the section declaration in all linker files (_memory.ld and _sections.ld). - Describe the split between bootloader and app sections of flash in each board's _memory.ld file. - Change program target to selectively erase flash so that the installed bootloader is preserved across even JTAG programming operations. - All elf files are built with debug symbols and are not stripped. This should help debugging with gdb. The images programmed on the boards are all .bin files now which do not include symbols. 2011-04-25 00:37:45 +02:00			`MEMORY`
			`{`
build: add pios_board_info_blob struct to bootloader flash image The board info blob is stored in the last 128 bytes of the bootloader's flash bank. You can access this data from the application firmware like this: #include <pios_board_info.h> if (pios_board_info_blob.magic == PIOS_BOARD_INFO_BLOB_MAGIC) { /* Check some other fields */ } DO NOT link pios_board_info.c into your application firmware. Only bootloaders should provide the content for the board info structure. The application firmware is only a user of the data. 2011-05-15 02:32:17 +02:00			`BL_FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 0x03000 - 0x00080`
			`BD_INFO (r) : ORIGIN = 0x08003000 - 0x80, LENGTH = 0x00080`
build: add support for EE bank on pipx boards The pipxtreme boards use a sector of the on-board flash for configuration storage. Adjust the memory maps to reflect this. The board_info_blob is also extended to include the EE bank definitions. This should be used by the pipxtreme firmware rather than determining it based on chip size. 2011-05-24 06:25:34 +02:00			`FLASH (rx) : ORIGIN = 0x08003000, LENGTH = 0x20000 - 0x03000 - 0x00400`
			`EE_FLASH (rw) : ORIGIN = 0x0801FC00, LENGTH = 0x00400`
build: add pios_board_info_blob struct to bootloader flash image The board info blob is stored in the last 128 bytes of the bootloader's flash bank. You can access this data from the application firmware like this: #include <pios_board_info.h> if (pios_board_info_blob.magic == PIOS_BOARD_INFO_BLOB_MAGIC) { /* Check some other fields */ } DO NOT link pios_board_info.c into your application firmware. Only bootloaders should provide the content for the board info structure. The application firmware is only a user of the data. 2011-05-15 02:32:17 +02:00			`SRAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x05000`
build: convert all app loads to require bootloaders This change is made up of a number of tightly coupled changes: - Deprecate the use of the USE_BOOTLOADER command-line option. It is now hard-coded in each Makefile. Overriding it on the command line is not allowed. - Split apart the memory declaration and the section declaration in all linker files (_memory.ld and _sections.ld). - Describe the split between bootloader and app sections of flash in each board's _memory.ld file. - Change program target to selectively erase flash so that the installed bootloader is preserved across even JTAG programming operations. - All elf files are built with debug symbols and are not stripped. This should help debugging with gdb. The images programmed on the boards are all .bin files now which do not include symbols. 2011-04-25 00:37:45 +02:00			`}`