Laurent Lalanne
ea377973fc
LP-346 RFM22 tuning: Add XtalCap value for fine tuning
2016-12-23 14:39:08 +01:00
Laurent Lalanne
f332d48e9b
LP-345 RFM22: Add frequency band selection. 433, 868 and 915Mhz band
2016-12-23 14:38:50 +01:00
Vladimir Zidar
64bf884f96
LP-391 Changed PIOS_COM_Init buffer len parameters to uint16_t type. Fixed simposix pios_board.c GPSPORT_GPS init incorrectly passing -1 to PIOS_Board_configure_com() which was on some platforms converted to large unsigned value.
2016-11-26 21:51:29 +01:00
Vladimir Zidar
a5a45576a1
LP-322 Added USB ComBridge functionality to OPLink. Updated GCS code.
2016-08-30 01:52:59 +02:00
Brian Webb
9fdde98ff9
LP-190: Adds OPLink configuration GUI cleanup from filnet.
2016-07-12 18:01:03 -07:00
Brian Webb
02b5a9bd78
LP-190: ppm_mode must be true if either 'control' or 'data and control' are set even if no PPM ports are configured, otherwise the data link doesn't work.
2016-07-12 17:49:26 -07:00
Brian Webb
0738c8a78a
LP-190: Final testing and bug fixes.
2016-07-12 17:47:16 -07:00
Brian Webb
91ea8966da
LP-190: Addes support for OpenLRS receiver protocol to the OPLinkMini. Also updates the OPLink configuration to better support OpenLRS.
2016-07-12 17:47:16 -07:00
Brian Webb
aa21761f4c
LP-190: Adds support for OpenLRS protocol to OPLinkMini
2016-07-12 17:47:16 -07:00
Brian Webb
a0279b272f
LP-190: Initial checkin that adds OpenLRS receiver support to Revolution and OPLinkMini.
2016-07-12 17:45:33 -07:00
Laurent Lalanne
c9fff7e16e
LP-151 OPLink: Allow custom Device ID or auto generated.
2016-05-01 21:56:50 +02:00
Alessio Morale
089c224514
Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37 )
...
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
2016-02-19 20:19:05 +01:00
Laurent Lalanne
f8f6e454f6
LP-219 Allow up to 12 channel as PPM input, only first 8 channels still used with Oplink.
2016-01-23 16:09:08 +01:00
Alessio Morale
70faa04b0a
LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers
2015-11-08 18:47:31 +01:00
James Duley
e308039206
LP-99 Decouple flight build
...
Moved flight make code into flight/Makefile. This should speed up
rebuilds for GCS and keeps the top level Makefile tidier.
Change-Id: I9d33cb5c223b6a8ed2821435a5d63ecf4b97c6b8
2015-09-02 19:34:58 +12:00
Roy Bekken
ad84547637
Update all changed files against GIT log with copyright headers consistency.
2015-08-19 16:15:58 +02:00
paul Jewell
6b6461c8b4
Replaced OPENPILOT_IS_COOL by TOP_LEVEL_MAKEFILE
2015-07-15 08:06:21 +01:00
Alessio Morale
764a15999f
REVONANO - Make FlashFS_Logfs optional, remove old onchip eeprom files
...
Conflicts:
flight/targets/boards/coptercontrol/firmware/Makefile
2015-05-18 18:55:21 +02:00
Alessio Morale
46521f1c2d
Merge remote-tracking branch 'origin/amorale/OP-1683_syncupdate_oneshot' into next
2015-02-08 17:59:59 +01:00
Alessio Morale
aa55b1523d
uncrustify
2015-02-05 01:42:32 +01:00
Laurent Lalanne
b9bfcd18d2
OP-1686 Slave Oplink may want to receive PPM data in PPM_Only mode
2015-02-02 21:25:38 +01:00
Karl Knutsson
137c183ec2
OP-1522 Remove unused channel set cfg
...
Remove unused channel set configuration option.
With the new channel allocation the old channel set
configuration isn't needed.
2015-02-02 21:25:38 +01:00
Karl Knutsson
a3715598c7
OP-1522 New channel allocation
...
Generate a pseudo random list of channels from hmac_sha1 with the
coordid as key.
Enforce channel spacing based on the frequency deviation derived
from the configured data rate.
2015-02-02 21:25:38 +01:00
Alessio Morale
ec69941c30
OP-1683 - Fix compilation for other targets
2015-01-24 13:08:56 +01:00
Alessio Morale
7a9a0868c9
OP-1275 - split persistence handling out of UavobjectManager. stubs are used if target deos not support persistency
2014-09-20 21:02:51 +02:00
Alessio Morale
531d80a69c
OP-1476 - Fix other targets for OP_DFU changes
2014-09-16 22:40:54 +02:00
Stefan Karlsson
070c2569ff
OP-922 Add pios_user_fs_id to oplinkmini to fix DEBUG=YES link error
2014-08-21 22:37:38 +02:00
Alessio Morale
57a43a5587
OP-1403 - Migrate to new HMC5x83 driver and remove old HMC5883 one
2014-08-02 20:48:34 +02:00
Alessio Morale
6226aec2a7
OP-943 uses pios_mem API for heap allocation
2014-06-11 22:15:40 +02:00
Corvus Corax
e9d1a2af4b
OP-1309 get rid of this horrible bound() function code duplication throughout entire flight code and put it into libraries/math
2014-04-26 17:48:54 +02:00
Philippe Renon
3b7b06aad0
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2014-04-09 09:11:54 +02:00
Philippe Renon
ef137a27b3
OP-1033 Added note where appropriate that changing USB buffer length will require changes to the USB buffer setup
2014-03-03 22:01:13 +01:00
Alessio Morale
2bcbf7dc86
OP-1026 remove legacy idle time calculation in OPLink code
2014-02-22 00:31:06 +01:00
Corvus Corax
49a1c4c28f
OP-942 refactored callback scheduler to fit into PiOS naming scheme
2014-02-02 22:08:16 +01:00
Corvus Corax
5b9a17f630
OP-942 moved DelayedCallbackScheduler into pios/common
2014-02-02 20:31:37 +01:00
Philippe Renon
772c395e67
OP-1122 OP-1145 fixed handling of ground messages done by OPLM
...
- OPLM used to receive and relay all messages
- OPLM will now reveice only specific messages and relay others as required (needs to be reviewed...)
- add RadioComBridgeStats uavobject to collect and report tx/rx statistics
- made error handling more robust
- added a few FIXMEs
2014-01-06 21:35:00 +01:00
Corvus Corax
be9faabe92
Merge branch 'next' into corvuscorax/onboardlogging
2013-11-26 00:34:01 +01:00
Alessio Morale
bacc4d3d79
Merge branch 'master' into next
...
Conflicts:
flight/targets/boards/oplinkmini/firmware/pios_board.c
ground/openpilotgcs/copydata.pro
2013-11-25 01:12:10 +01:00
Corvus Corax
d235a24e23
Merge branch 'next' into corvuscorax/onboardlogging
2013-11-19 18:49:58 +01:00
Corvus Corax
7a6c0b61e8
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-11-19 18:36:20 +01:00
Corvus Corax
9414f3513f
adapted telemetry stack sizes for flight firmware to include more space needed for logging feature
2013-11-17 22:39:39 +01:00
Brian Webb
2340f4f0d9
OP-1050: Moves LED configuration above settings erase in OPLink pios_board.c to prevent crashing when settings are erased.
2013-07-29 20:37:00 -07:00
Corvus Corax
9537cac701
Merge branch 'next' into corvuscorax/callbackeventdispatcher2
2013-07-28 17:10:20 +02:00
Brian Webb
e246ecf536
Moves pios_led functionality to pios_gpio and makes pios_led a thin layer over pios_gpio. Supports configuring multiple sets of GPIOs.
2013-07-28 07:01:08 -07:00
Alessio Morale
11bc7804d0
Merge branch 'amorale/OP-994_adc_cleanup' into next
2013-07-16 12:23:25 +00:00
Brian Webb
0d02df4d02
Uncrustified OPLink code.
2013-07-05 18:49:26 -07:00
Brian Webb
6dbecca7a5
OP-932 Fixes erasing settings on OPLink and blocks OPLinkSettings objects from being transmitted over the radio.
2013-07-05 18:25:52 -07:00
Brian Webb
d0d8a0aadd
OP-932 Adds PWM outputs to OPLinkMini. Both gpio pins on the main and/or flexi port can be configured to output PWM for a total of up to 4 PWM outputs.
2013-07-03 18:58:34 -07:00
Alessio Morale
89cb294218
OP-994 Move pios_architecture,h include in pios,h
...
+review OPReview-506
2013-07-02 19:26:39 +02:00
Brian Webb
491e5fe685
Adds a failsafe on PPM output on OPLink that kicks in when the link goes down. Also updates all air datarate settings and adds new 64 and 100 kbps modes.
2013-06-29 15:00:38 -07:00
