James Cotton
2488b48f50
Merge branch 'usb_fixes' into next
2012-09-11 10:18:45 -05:00
James Cotton
d74b9c9b9f
Revert changes from Kenn in pjrc_rawhid which conflict with usb cleanup
2012-09-11 10:18:31 -05:00
James Cotton
509e7a2ec1
Merge remote-tracking branch 'origin/hyper/gcs-levelling-fixes' into next
2012-09-11 03:05:47 -05:00
Richard Flay (Hyper)
5b7fb6bcef
Minor improvement to GCS bias calibration logic, plus minor UI behaviour tweak
2012-09-10 22:22:36 +09:30
James Cotton
59dcbf5cb6
GCS OSX: More refinements to the USB code to make it more robust and work for reset/halt.
2012-09-10 02:04:59 -05:00
James Cotton
e027c25071
OSX USB: Add write and read mutexs to avoid closing mid write.
2012-09-10 00:32:40 -05:00
James Cotton
f8e5654ff4
Remove some comments
2012-09-09 23:45:04 -05:00
James Cotton
26ff40b5f3
GCS OSX: Work on how the receive threads are stopped properly
2012-09-09 23:43:38 -05:00
James Cotton
604e125251
GCS RawHID: Refactor the code to move most of the
...
functionality into one class. Removed support for
multiple open devices since we can just use multiple
classes.
2012-09-09 17:10:50 -05:00
James Cotton
741207ddc0
GCS OSX HID: Tweak the closing so that it doesn't crash. Still fails to unregister
...
the input callback.
2012-09-09 13:03:57 -05:00
James Cotton
8bb6a2600f
GCS Serial: Was double detecting USBCDC devices.
2012-09-09 11:40:14 -05:00
James Cotton
06fc1ed963
GCS USB: More the opening and closing code into the read
...
thread to simplify some threading issues on OSX. Should
not influence other operating systems.
2012-09-09 11:04:52 -05:00
PT_Dreamer
ba575edbbc
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
...
OPReview 248
2012-09-09 12:30:09 +01:00
James Cotton
b84f833287
GCS Uploader: Remove dialog about another board since it's
...
not used for any boards now.
2012-09-08 20:05:07 -05:00
James Cotton
44d271ac79
GCS USB: Get rid of some unnecessary code
2012-09-08 20:04:44 -05:00
James Cotton
cf1c986550
OSX USB: Close more handles properly
2012-09-08 19:48:33 -05:00
James Cotton
3f11c398db
GCS USB: Start with polling enabled so it acts like before and grabs first available USB device
2012-09-08 19:46:45 -05:00
James Cotton
1aadcf4e70
GCS USB: Make sure to fully unregister all the callbacks when disconnect.
2012-09-08 19:31:32 -05:00
James Cotton
9b7060a491
GCS USB: Increase the max timeout before giving up on stopping the USB threads.
2012-09-08 19:07:14 -05:00
James Cotton
82f752685a
GCS ConnectionManager: When polling is disabled don't automatically connect to boards either.
2012-09-08 19:06:03 -05:00
James Cotton
2ec8434941
OSX USB: Make sure to store the run loop handle before connecting the signals that can use it.
2012-09-08 16:06:01 -05:00
James Cotton
6840b8934b
GCS ConnectionManager: More cleaner code structure.
2012-09-08 16:05:51 -05:00
James Cotton
8e8cbd0b75
GCS ConnectionManager: Use some cleaner code coventions
2012-09-08 15:45:08 -05:00
James Cotton
19eaa77a15
Remove some comments and unused variables
2012-09-08 15:32:12 -05:00
James Cotton
65ef8a59b4
GCS ConnectionManager: Get rid of all the copies of various forms of the names and
...
store a handle to the IConnection::device and generate the appropriate names from
consistent functions.
2012-09-08 15:14:06 -05:00
James Cotton
1ca8abb3c8
GCS ConnectionManager: Properly check it is the active connection before closing it when a USB device is disconnected.
2012-09-08 14:31:16 -05:00
James Cotton
3563c7376f
GCS ConnectionManager: When plugging in a new device don't glitch the connectionwq
2012-09-08 14:04:59 -05:00
James Cotton
9912432e84
GCS ConnectionManager: Remove some commented code
2012-09-08 13:33:50 -05:00
James Cotton
44e7c4542f
GCS USB: Implement structure for only adding new devices but need a way of
...
identifying them
2012-09-08 13:23:37 -05:00
James Cotton
e5ab9f0fda
GCS ConnectionManager: Consolidate the unregistering and registering devices
...
into one method
2012-09-08 12:53:00 -05:00
James Cotton
e6bcf96e2a
GCS USB: Remove unused include file
2012-09-08 12:47:15 -05:00
Richard Flay (Hyper)
c5745b0817
Fixes/tweaks to GCS levelling code. Fixed a deadlock and take more samples
2012-09-08 15:58:39 +09:30
Werner Backes
2a4e135c81
Merge branch 'D-Lite/fix_CC3D_yawBias_correction' into next
2012-09-06 13:47:03 +02:00
Werner Backes
4803dfe99c
Fix: yaw bias correction wasn't applied on CC3D.
2012-09-06 13:13:58 +02:00
Stacey Sheldon
97882dbef9
pipx: ensure pipx BL image is padded to fill its bank
...
This padding is required in order to properly align all
of the sections in the EF images.
2012-09-05 22:17:04 -04:00
Stacey Sheldon
803e3c4d1e
ef: Add fwinfo to entireflash (EF) images
...
EF images were missing the firmware info blob that describes
which firmware is installed on the board. The EF image is now
padded out to fill the firmware bank and the info blob is
properly placed at the tail end of the firmware bank.
2012-09-05 21:45:59 -04:00
James Cotton
a3b75a3cc7
Merge remote-tracking branch 'origin/kenz/matlab_parser_vectorizing' into next
2012-09-02 19:23:18 -05:00
James Cotton
db083aa0e9
Merge branch 'android' into next
2012-09-02 19:19:23 -05:00
James Cotton
42a11788f9
AndroidGCS Controller: Make the default value mode 2
...
Previously typed "Mode 2" but it wants the integer value for the
default setting. This stops a crash when no configuration.
2012-08-30 12:14:07 -05:00
James Cotton
6d16f4c0a9
AndroidGCS Map: Make sure to grab the correct uavLocation and homeLocation at startup
2012-08-30 12:14:03 -05:00
James Cotton
60051e88cc
Calibration: Fix both accels and gyros to 30 ms. Should be reasonably sustainable through USB.
2012-08-30 11:38:15 -05:00
James Cotton
0f29f6e403
AndroidGCS Controller: Use the controller mode preference to select mode1 versus mode2
2012-08-30 11:00:50 -05:00
James Cotton
3488f0d2a2
AndroidGCS Controllre: Add an option for mode 1 or mode 2
2012-08-30 10:36:46 -05:00
James Cotton
e85d959bf5
AndroidGCS Bluetooth: Fix crash when no paired devices
...
Previously tried to make it list "No devices" but this triggered other
crashes.
2012-08-30 09:45:12 -05:00
James Cotton
0f28f65be6
AndroidGCS PFD: Update the graphics for the PFD
2012-08-30 01:01:53 -05:00
James Cotton
2ca353992c
AndroidGCS PFD: Properly center image now so it works over multiple sizes.
...
However, it doesn't automatically fill the screen in normal PFD view yet. Specifying the width in pfd.xml directly does fix that but is incorrect.
2012-08-30 00:10:20 -05:00
James Cotton
cffeb6c65a
AndroidGCS Tuning: Improvements to the tablet layout.
2012-08-29 23:34:04 -05:00
James Cotton
e2fdc95540
AndroidGCS: Use a relative layout for the object browser view.
2012-08-29 22:59:10 -05:00
James Cotton
fbefba69e2
AndroidGCS: For now force the min width of the ScrollBarView to 300dp
...
Because I don't know how to make it automatically expand to fill the columns.
This makes it get close until multiple layout sizes.
2012-08-29 22:00:46 -05:00
James Cotton
12f0c18049
AndroidGCS: Check in some layouts for greater than 600px width
2012-08-29 21:59:53 -05:00
