James Cotton
878def305f
RM: Make radio an optional module
2012-09-01 11:11:52 -05:00
James Cotton
0d3b0d4e5b
Fixup: Disable binding on mainport for DSM
2012-09-01 11:11:28 -05:00
James Cotton
f3327e3993
RM: Enabled optional modules and got the battery module working again.
...
Changed the hardcoded (ick) battery lines for RM. Also removed the reference
to PIOS_ADC_GetPin(4) as that pin is no longer available. Finally
changed the default FlightBatterySettings to work out of the box
for the standard recommended sensors.
2012-09-01 11:03:32 -05:00
James Cotton
a33f415866
RM DSM: Get DSM working on the mainport
...
Because of the inverter this does not support binding on this port.
2012-08-31 11:08:43 -05:00
James Cotton
300cee44b4
RM SBUS: There is no pull down on the inverter direction so when not SBUS must explicitly set to off.
2012-08-31 11:01:34 -05:00
James Cotton
d333e24a43
RM: Swap to using the CC_ flags for the flexi port too.
2012-08-31 10:30:00 -05:00
James Cotton
73c7190077
RM GPS: Use the CC_MainPort instead of a RV flag and enable GPS support
2012-08-31 10:17:10 -05:00
James Cotton
bdd50ce66b
Reenable the flash system
2012-08-26 05:03:05 -05:00
James Cotton
2bb4f860e1
Shuffle around the PACKET_HANDLER definition so we can more easily disable the Radio module.
2012-08-25 22:58:11 -05:00
James Cotton
06154836c6
Define the RADIO_BUILTIN in config file
2012-08-25 19:31:48 -05:00
James Cotton
9e25e887c2
Temporarily disable flash chip and configure SPI for modem.
2012-08-25 18:43:13 -05:00
James Cotton
ad7a9b9cc3
Switch the order of the SET_RC pins for flash and rfm22b
2012-08-25 17:49:15 -05:00
James Cotton
76bdb190d8
Link in the rfm module to the target
2012-08-25 17:27:17 -05:00
James Cotton
0decce582b
Got all the sensors reading
2012-08-25 14:19:15 -05:00
James Cotton
31ebb7bbd8
Remove the old BMA180 and L3GD20 code and fix the irq lines for the sensors.
2012-08-25 13:51:52 -05:00
James Cotton
ce5ef7edf3
Update the serial ports and receiver and servo ports
2012-08-25 13:19:23 -05:00
James Cotton
05e2e24bcb
Reconfigure the SPI ports.
2012-08-25 12:38:44 -05:00
James Cotton
60160001c6
Copy the revo project to revo mini
2012-08-25 12:23:54 -05:00
