edouard
1ef9eceac5
Lower amount of debug output in Linux USB Monitor.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3079 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 11:57:16 +00:00
edouard
332cafa8b8
Improve behaviour of Uploader gadget whenever the board does not manage to get into bootloader mode.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3075 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 11:22:31 +00:00
edouard
34fffd0e50
CC-39 New helper function to get the Board model (synchronously). Will be used by config gadget to dynamically load the right interfaces for the board type.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3073 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-26 01:25:26 +00:00
edouard
81269f786e
USB Stability fixes.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3071 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 14:50:23 +00:00
erhard
79c4b2fe76
OP-358 GCS: Just keep the default dials in the dials showcase
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3069 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 13:05:29 +00:00
edouard
8a6f83e232
OP-352 Reorder config gadget widget to have a more logical order.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3068 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 12:16:49 +00:00
edouard
417e637904
Sorry...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3067 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 11:24:27 +00:00
edouard
9d0ce95b37
Attempt to fix GCS crashes on USB disconnect: please confirm on other operating systems it is still working fine in all situations.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3066 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-25 10:59:24 +00:00
chebuzz
c00090391b
OP-342 GCS/ModelView - Update glc_lib to newest 2.1 release (fixes known issues) and update modelview to use this new lib.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3063 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-22 21:15:46 +00:00
peabody124
593ccfad7b
OP-334 USB HID now working again on mac
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3060 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-22 11:50:26 +00:00
jonathan
32430a3b15
OP-191: Merge from full-calibration branch. Replace 6-point calibration with multi-point TWOSTEP-based calibration. Currently uses 22 points, but can scale up or down as needed. Simultaneously computes gyro bias, accelerometer bias, accelerometer scale factor, accelerometer orthogonality, magnetometer scale factor, and magnetometer bias calculations.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3058 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:54:09 +00:00
jonathan
baf848d4f0
Attempt to get a useful error string when we cannot connect to a USB device;
...
Fix typo.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3056 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:50:15 +00:00
jonathan
44e3466e0a
OP-191: Merge from full-calibration branch. Add an implementation of TWOSTEP, including bias-only, bias + scale factor, and bias + scale factor + orthogonality calibration methods.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3053 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:45:40 +00:00
jonathan
e40f6752bd
OP-191: Merge from full-calibration branch. Import Eigen 2.0.15 to the GCS. Add the bits that eclipse missed the first time around.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3052 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:44:22 +00:00
jonathan
bf191fed27
OP-191: Merge from full-calibration branch. Import Eigen 2.0.15 to the GCS.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3051 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-21 00:43:09 +00:00
edouard
f2a7f8e187
Add Powerlog plugin to plugins.pro (disabled)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3050 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-20 15:55:43 +00:00
edouard
11f7766ab4
Raw HID plugin: improve initialization in case another plugin wants to use the USBMonitor.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3049 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-20 15:55:02 +00:00
edouard
d10dd33016
This is a GCS plugin which adds an entry in the 'Tools' menu to get the output of the Junsi PowerLog6S. This plugin is not enabled by default.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3048 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-20 15:54:23 +00:00
fredericg
ef1dcf6939
rename batterysettings.xml => flightbatterysettings.xml
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3046 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-19 18:31:58 +00:00
edouard
03a5e78897
Junsi Powerlog utility: output data in CSV format, so that it is actually useful. Works great to make graphs.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3044 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-17 18:12:08 +00:00
chebuzz
1e59cc79ec
GCS/MagicWaypoint - Missing dependency for magic waypoint in .pro file that caused build to fail when using multiple jobs (-j2, -j12, -jX...)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3043 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-16 08:04:44 +00:00
edouard
7100c2e9cd
Better phrasing for telemetry configuration interface.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3041 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-15 14:24:40 +00:00
edouard
823f814d85
OP-330 Log replay does not crash at the end anymore.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3039 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 22:27:26 +00:00
edouard
c355dfff44
OP-250 Update menu entry for logging so that it reads "Stop logging" when logging is going on.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3038 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 21:23:26 +00:00
edouard
2d847fe4d7
Update OpenPilotGCS.ini (default config) to use the latest artwork and dials configuration.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3034 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 16:15:30 +00:00
edouard
89fc8141fc
OP-228 Make System Heal gadget aware of link status (autopilot connected/disconnected). A new version of the diagram is bundled which displays the status, you will have to update your configuration to use it.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3033 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 15:08:02 +00:00
edouard
581d2497c8
OP-247 Scope gadget: restore checked/unchecked state of curve legends when unhiding.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3032 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 14:14:52 +00:00
edouard
afb7aaf374
OP-334 : reverted opening method in RawHID plugin, as the new pjrc_rawhid class does not play nice with the USBMonitor system in case several devices with the same PID/VID are present on the system (such as two PipX for example)
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3031 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-13 13:03:11 +00:00
corvus
9859829fcc
HITL/IL2: Fixed calculation of AttitudeRaw.accel[XYZ]
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3025 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-11 20:16:31 +00:00
zedamota
e1eaf4d132
OP GCS/HID - Now found the true problem, I just need to find an hungry French monkey now.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3024 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-11 18:52:44 +00:00
zedamota
162deda2ba
OP GCS/HID - Fixes a problem created with the conversion of the monitor class to singleton. I don't quite understand the problem so this is just a quick fix. Also changed PipXtreme gadget to use new PID.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3023 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-11 18:42:32 +00:00
edouard
cb95edaedc
Upate RawHID plugin to cope with the new PID/VIDs
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3021 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 18:55:06 +00:00
edouard
bfed85a9b0
Update uploader gadget to use the USB monitor to get the list of available devices.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3013 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-09 00:07:07 +00:00
edouard
51a8a2d525
OP-334: Make the USBMonitor a singleton and export its symbols in the RawHID plugin, so that other plugins can use its instance(). Also implement a way
...
to ask for devices in bootloader or running mode.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3012 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-08 23:59:29 +00:00
edouard
6dcb9b2dcc
use constants in the rawhid plugin instead of hardcoded VID
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3004 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:16:50 +00:00
pip
5c7e74e169
Removed commented out un-used signal/slot
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3003 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:07:41 +00:00
pip
69b930899c
Removed un-needed signals.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3002 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:06:57 +00:00
edouard
191df1a118
Small utility to parse the output of a Junsi PowerLog6S, should work on Linux, Windows & Mac. Testbed for the HID library and USB device detection we're working on, not directly related to the GCS...
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3001 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 22:00:26 +00:00
edouard
18a39c964e
Corrected several typos in the device detection code, improved Linux detection (more efficient).
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@3000 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 21:50:13 +00:00
edouard
c1546d818f
OP-328 Stub for MacOS support of USB Monitor.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2999 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-07 20:38:34 +00:00
edouard
61c8ea9185
OP-334 Now fill the bcdDevice and other fields (except HID page info) on Linux too.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2994 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-06 22:57:34 +00:00
edouard
cc1a53417d
Barometer in High-contrast theme was missing from the share directory. Added.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2991 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-06 17:34:28 +00:00
osnwt
6a0a8f00c9
OP-305: fixed syntax error when building on Windows under sh
...
Line:
$(CHK_DIR_EXISTS) dir $(MKDIR) dir
under cmd translates into
if not exist dir mkdir dir
but under sh it becomes
test -d dir mkdir dir
which is syntax error.
So CHK_DIR_EXISTS removed, MKDIR made unconditional.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2989 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-06 13:38:30 +00:00
zedamota
0eb0f4365a
OP GCS/HID - just added the Usage field to the USBPortInfo struct.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2977 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 15:58:17 +00:00
sambas
8fb82584b1
removed some redefined warnings in windows
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2976 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 13:51:29 +00:00
pip
5c01155c4f
oh ***! .. to early on a Saturday morning to be doing this .. sorry.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2974 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 10:55:38 +00:00
pip
1db840ed8a
Correct mistake just made in "ConnectionManager::connectDevice()"
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2973 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 10:19:37 +00:00
pip
7fe74cda15
We weren't closing the device (after opening it) if "io_dev->isOpen()" returned false in the "ConnectionManager::connectDevice()" function.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2972 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-05 10:17:18 +00:00
edouard
e290d37df5
Fix logging gadget for replay speed setting.
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2969 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 23:22:49 +00:00
pip
63d919dbbe
Removed monitor (SIGNAL/SLOT) for deviceClosed event. will remove the device closed stuff in rawhid if alls well later
...
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2968 ebee16cc-31ac-478f-84a7-5cbb03baadba
2011-03-04 23:16:51 +00:00