rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-02 10:24:11 +01:00
Code Issues Releases Activity
13,640 Commits 5 Branches 8 Tags 266 MiB
466f4bb695
Commit Graph

5627 Commits

Author SHA1 Message Date
samguns
8551048354 REVONANO 1. Sanity check for PWMSync & OneShot while using PWM receiver. 2. Remove CC in hwsettings.xml 2015-05-26 15:01:01 +08:00
abeck70
4a78602da2 REVONANO Guidance alarm clearing on change of mode 2015-05-25 22:26:06 +10:00
abeck70
bddb9377a4 REVONANO Land and Takeoff uav changes removing abort state. 2015-05-25 22:25:07 +10:00
abeck70
cdf1b88cc0 REVONANO VelocityRoam fixes 
1. New VelocityRoamHorizontalVelPID to allow tuning of VR independent of pathfollower nav modes
 2015-05-25 22:24:06 +10:00
abeck70
c5715b26af REVONANO Landing fixes 
1. Forced disarm via guidance alarm critical on disarm state
2. Continue to zero stabi including yaw during disarm state just in case it doesn't actually disarm.
 2015-05-25 22:21:53 +10:00
abeck70
7d66a075de REVONANO Fixes to AutoTakeoff 
1. Fix autoyaw to 0 attitude on takeoff post launch.
2. An error condition abort now properly disarms and continues to contrain thrust and stabi during disarmed state.
3. Increase thrustdown time from 2 to 5 seconds on an error condition (e.g. if 3 m deviation from takeoff position on NE).
 2015-05-25 22:19:01 +10:00
abeck70
50d60649aa REVONANO Fix BrakeController to use vtol VerticalVelPID instead of LandVerticalVelPID 2015-05-25 22:13:13 +10:00
abeck70
89b40f3173 REVONANO: Landing and disarming fixes 
Also prevent stabi control in land's disarm state
 2015-05-25 08:50:33 +10:00
Steve Evans
a0d6de4e1d Merge branch 'rel-nano-15.05' into steve/OP-1904_Display_current_TxPID_settings_on_OSD 2015-05-24 13:00:44 +01:00
abeck70
6d68ed66d9 Merge branch 'steve/OP-1905_Fix_broken_telemetry_if_OPLM_in_PPM_only_mode' into abeck/nano-rc3-fixes 2015-05-24 20:44:31 +10:00
abeck70
d8f6a7827e REVONANO fix velocity mode use of altvario 2015-05-24 20:38:35 +10:00
abeck70
a4cff482b4 REVONANO fix altitudeHoldTask initialisation 2015-05-24 20:38:07 +10:00
abeck70
b89d8813b1 REVONANO Optimise and fix when altvario task is disabled 2015-05-24 20:37:42 +10:00
abeck70
553728ffd8 REVONANO Trial Rate on Yaw during braking instead of AxisLock 2015-05-24 20:36:44 +10:00
abeck70
ba903614c6 REVONANO Improve GPSAssist 
I decided to not check throttle when re-enabling stabii control. It can feel as though the mode is defective.  I would rather someone have immediate always-there ability to overridwe gps hold.
 2015-05-24 20:34:28 +10:00
Steve Evans
7e2c27671d Merge branch 'steve/OP-1905_Fix_broken_telemetry_if_OPLM_in_PPM_only_mode' into steve/OP-1904_Display_current_TxPID_settings_on_OSD 2015-05-24 10:28:47 +01:00
Steve Evans
4f8ffc612f OP-1905 Fix variable initialisation 2015-05-24 10:24:18 +01:00
Steve Evans
31eae08bba OP-1905 Fix OPLM in PPM mode blocks telemetry stream if no USB connected 2015-05-24 10:18:54 +01:00
Steve Evans
5a9ee46742 OP-1904 Initial commit 2015-05-23 21:55:19 +01:00
Steve Evans
b2dd03cf23 OP-1903 Add AccelTau, AccelKp and AccelKi to TxPID 2015-05-23 14:00:50 +01:00
abeck70
064a5e831b OP-1898 VelocityRoam gets its own MaxRollPitch 
This allows smoother velocityroam flight
 2015-05-22 21:23:10 +10:00
abeck70
ee43c53cee Merge branch 'rel-nano-15.05' into abeck/OP-1898-VR 2015-05-22 18:46:09 +10:00
abeck70
c0c5cd3d16 OP-1464 uncrustify 2015-05-22 18:36:38 +10:00
abeck70
22b2317732 Merge branch 'theothercliff/OP-1464_Handle_Autobaud_code_for_GPS' into rel-nano-15.05 2015-05-22 18:34:17 +10:00
abeck70
f4b3c5d67a Merge branch 'thread/rel-15.05_SRXL' into rel-nano-15.05 2015-05-22 17:44:44 +10:00
abeck70
55b3b52c4f OP-1898 VelocityRoam flight mode 
Replace PositionRoam with VelocityRoam

Make VelocityRoam an explicit flight mode to simplify access

Disable PositionRoam as not supported and not suitable to retain.
 2015-05-22 17:34:43 +10:00
abeck70
66643f185e REVONANO uncrustify pios_usart 2015-05-21 22:18:36 +10:00
Cliff Geerdes
ced0d4725b OP-1464 Rename things as requested Implement autodisable as advised by Alessio 2015-05-21 04:37:44 -04:00
m_thread
2ce0d5f378 OP-1837 Added SRXL support to nano. 2015-05-21 09:11:55 +02:00
Cliff Geerdes
55a43d1815 OP-1464 Compile warning discovery Remove AbConfStoreDisable 2015-05-20 01:04:06 -04:00
Cliff Geerdes
244c9e2d5e Merge branch 'rel-15.05' into theothercliff/OP-1464_Handle_Autobaud_code_for_GPS 2015-05-19 21:57:34 -04:00
Cliff Geerdes
3bbe7274ca OP-1464 remove commented out or unused code and pretty it up 2015-05-19 21:34:47 -04:00
Cliff Geerdes
1ade8b7f59 OP-1464 remove debug 2015-05-19 20:45:57 -04:00
Cliff Geerdes
de521c9004 OP-1464 tested version with debug still in place 2015-05-19 19:33:31 -04:00
Steve Evans
c3a55d671f OP-1849 DTR on FlexIO pin 3 
Conflicts:
	flight/targets/boards/revonano/board_hw_defs.c
 2015-05-19 21:35:34 +10:00
Cliff Geerdes
92295559b0 OP-1464 GPS autobaud - stash while debugging newobject issue 2015-05-18 18:37:53 -04:00
Laurent Lalanne
1aceea7532 REVONANO : Enable all Airspeed modules 2015-05-18 23:08:43 +02:00
Alessio Morale
9fa1fe870a OP-1803 - Add support to RevoNano 2015-05-18 21:36:13 +02:00
Alessio Morale
1ce23d722c REVONANO - Raise the number of leds supported to 10, added limits 2015-05-18 21:30:05 +02:00
Alessio Morale
d521ce6023 REVONANO - Add support for WS2811 led on servo output 1. 
To free timer1, a unused timer (9) is assigned on the fly to servo out 1 to leave pin mappings unchanged. A better approach should be implemented Later (jira 1035)
 2015-05-18 21:30:05 +02:00
Alessio Morale
04c067e8cd REVONANO - Workaround an approximation bug in SPL UART code. 
Due to some approximation bug in SPL 100000 gives a prescaler of 29 resulting in (48000000 / 29) / 16 (oversampling)  = 103448
99999 gives a nice 30 resulting in exactly 100000.
 2015-05-18 21:30:04 +02:00
Alessio Morale
295ca38026 REVONANO - Fix Prescaler settings for APB1 and 2 (48MHz and 96MHz) 2015-05-18 21:30:04 +02:00
Werner Backes
25b5278b05 Corrected mpu9250 magnetometer axis orientation. 2015-05-18 21:30:04 +02:00
Alessio Morale
8cb9f8b802 REVONANO - Enable some other modules (battery, airspeed, CameraStab) for testing 2015-05-18 21:30:04 +02:00
Alessio Morale
109c21a8ab REVONANO - Workaround for the SBUS issue (use oversample 8 instead of 16 to reduce the bitrate error) 2015-05-18 21:30:04 +02:00
Alessio Morale
3fd75273f5 Cleanup/uncrustify 2015-05-18 21:30:04 +02:00
Alessio Morale
0d714fb861 REVONANO - Change Power Regulatro Scale mode to Scale1. 
Looks like stm32f4xx_Clock_Configuration_V1.1.0 seems like doesn't play well with 411. Reg Scale mode was wrong
 2015-05-18 21:30:03 +02:00
abeck70
c0618258ad OP-1760 nano statusvtol addition 2015-05-18 21:30:03 +02:00
Alessio Morale
3152ebcaf0 OP-1828 - add support for Revonano 2015-05-18 21:30:03 +02:00
Alessio Morale
15a5022c7e Raise callbackscheduler stack size 2015-05-18 21:30:03 +02:00
Alessio Morale
2c96835555 REVONANO - Fix System stack size 2015-05-18 21:30:03 +02:00
Alessio Morale
40fa643cca REVONANO - Cleanup servo pin definitions, map PPM as last channel 2015-05-18 21:30:02 +02:00
Alessio Morale
855361488a REVONANO - emulate bigger sector size for erase operations 2015-05-18 21:30:02 +02:00
Alessio Morale
5ca6e43070 REVONANO - Fix erase settings 2015-05-18 21:30:02 +02:00
Alessio Morale
2497b3d605 REVONANO - some cleanup 2015-05-18 21:30:02 +02:00
Alessio Morale
60f8a8d9f0 REVONANO - Move PPM to input 2 to support oneshot 2015-05-18 21:30:02 +02:00
Alessio Morale
2dcc9e5deb OP-1659 - Revonano, raise sensor rate to 500Hz 2015-05-18 21:30:01 +02:00
Alessio Morale
54b83085bb OP-1696 - Revonano cpp support 2015-05-18 21:30:01 +02:00
Alessio Morale
895540974a REVONANO - Disable Sensitivity Adjustment values. 2015-05-18 21:30:01 +02:00
Alessio Morale
cf09616ba8 OP-1685 - OneShot support for revonano 2015-05-18 21:30:01 +02:00
Alessio Morale
e4dc6b0b64 OP-1658 - baro support for revonano 2015-05-18 21:30:01 +02:00
Alessio Morale
43f04a340b OP-1658 - MPU9250 support for sensor "reset", fix temperature measurement 2015-05-18 21:30:01 +02:00
Alessio Morale
174340d8bf OP-1658 - Various fixes for MPU9250 2015-05-18 21:30:01 +02:00
Alessio Morale
94d30f7ad2 OP-1658 - Add RevoNano support 2015-05-18 21:30:00 +02:00
Alessio Morale
928f1385ec OP-1658 - MPU9250 sensor device model implementation 2015-05-18 21:30:00 +02:00
Alessio Morale
5a140957f9 REVONANO - Update uavos list 2015-05-18 21:30:00 +02:00
Stefan Karlsson
2630383669 REVONANO - Fix the I2C Error IRQ Handler name for the pressure adapter 2015-05-18 21:29:59 +02:00
Stefan Karlsson
a3fc54ac0b REVONANO - Fix Baro initialization bug 
The I2C SCLK pin (A8) was being changed by code used to support battery voltage sensing on the Revo. This code was run after PIOS_I2C_Init but before PIOS_MS5611_Init, causing a BUSY state on the I2C bus before the Barometer initialization code was run.
 2015-05-18 21:29:59 +02:00
Laurent Lalanne
57845a7cf9 REVONANO - Disable WDG - Add PathPlanner and PathFollower modules - Fix Tx/Rx buffers for GPS 2015-05-18 21:29:59 +02:00
Stefan Karlsson
8f94aa5353 REVONANO - Use Nano as the USB connection name 2015-05-18 21:29:59 +02:00
Stefan Karlsson
7252fb4207 REVONANO - Fix Auto Upload 2015-05-18 21:29:58 +02:00
Laurent Lalanne
aff4951d02 REVONANO Remove hardcoded Flexiport with telemetry 2015-05-18 21:29:58 +02:00
Stefan Karlsson
21b485aa3f REVONANO - Fix timers for PPM 2015-05-18 21:29:58 +02:00
Stefan Karlsson
047ee1fcb0 REVONANO - Remove relaytuning from revonano target 2015-05-18 21:29:58 +02:00
Laurent Lalanne
f82a584eb2 REVONANO mpu9250 driver fix for Mag orientation 2015-05-18 21:29:57 +02:00
Alessio Morale
3651ac61a3 REVONANO - Change sensors rate to 333Hz 2015-05-18 21:29:57 +02:00
Alessio Morale
1d7c1b2fc9 REVONANO - Change target to 411, fix ram and flash extents, raise clock to 96MHz (cannot do 100 because of USB) , cleanup spl 2015-05-18 21:29:57 +02:00
Alessio Morale
674963790e REVONANO - Enable WDG and raise timeout value (due to eeprom reading and initialization being very slow) 2015-05-18 21:29:57 +02:00
Alessio Morale
e5baa8e847 REVONANO - align to 9k setting uniformation 2015-05-18 21:29:57 +02:00
Alessio Morale
15e7286078 MPU9K - merge 9k and 6k settings into a single uavo 2015-05-18 21:29:56 +02:00
Alessio Morale
951c9c2fad REVONANO - Disable WDG for debug pourposes 2015-05-18 21:29:56 +02:00
Alessio Morale
3563b1ff0e REVONANO - Prevent modules to start before init: move most code to pios_initcall.h. System and system-Like modules 2015-05-18 21:29:56 +02:00
Stefan Karlsson
efb6855f6f REVONANO - Various temp fixes debug code to get nano to read from the flash. Code has been added to make the execution of systemTask wait until initTask has completed. 
Conflicts:
	flight/pios/common/pios_flashfs_objlist.c
 2015-05-18 21:29:56 +02:00
Stefan Karlsson
2d3c8b835a REVONANO - Turn on StateEstimate 2015-05-18 21:29:56 +02:00
Stefan Karlsson
8c8abc3cb5 REVONANO - Increase fast_prescaler for the MPU so that it doesn't consume all CPU 2015-05-18 21:29:56 +02:00
Alessio Morale
96659f5757 REVONANO - some unused var cleanup 2015-05-18 21:29:55 +02:00
Alessio Morale
288c9019d1 uncrustify 2015-05-18 21:29:55 +02:00
Alessio Morale
51094ba95d REVONANO - Minor cleanup of MPU9250 driver 2015-05-18 21:29:55 +02:00
Alessio Morale
4ec44cea90 REVONANO - Fix BU target 2015-05-18 21:29:55 +02:00
Alessio Morale
210b75fcb9 REVONANO - Fix MPU Prescalers 2015-05-18 21:29:55 +02:00
Alessio Morale
b6eedaf93d REVONANO - Fix PIOS_SYSCLK Declaration 2015-05-18 21:29:55 +02:00
Alessio Morale
d2dae79c82 REVONANO - update SPL to 1.4.0 that adds support for f411 2015-05-18 21:29:55 +02:00
Alessio Morale
4a7d81ed01 REVONANO - Fix gyro spi config and include MPU9250 support 2015-05-18 21:29:54 +02:00
Mathieu Rondonneau
66b06e4c9a REVONANO - Add MPU9250 support 2015-05-18 21:29:42 +02:00
Alessio Morale
fb11b312c5 REVONANO - Flash fs fixes 2015-05-18 21:26:40 +02:00
Alessio Morale
632a14023c REVONANO - exclude ccram stuffs 2015-05-18 18:55:26 +02:00
Alessio Morale
8a02caa33a REVONANO - Fix eeprom configuration 2015-05-18 18:55:26 +02:00
Alessio Morale
5c13551a1a REVONANO - Add support for eeprom and objlist fs 2015-05-18 18:55:25 +02:00
Alessio Morale
8b11861c63 REVONANO - Readd old objlist FS to be used with EEPROM 2015-05-18 18:55:25 +02:00
Alessio Morale
1e1195ec05 REVONANO - Add Eeprom support 2015-05-18 18:55:25 +02:00