abeck70
ca03092fb4
OP-1863 ratetrainer update stab handler to support new outerloop directwithlimits mode
2015-05-04 08:40:06 +10:00
Alessio Morale
9dcd6990d3
OP-1874 - Add notification for Critical alarms, add Attitude, modify alarm repetition rates.
...
reduce rate for Magnetometer, Receiver. Include Attitude.
2015-05-03 23:13:53 +02:00
Laurent Lalanne
842330922f
Merge branch 'amorale/OP-1857_ppm_on_flexi_cc' into rel-15.02.02
2015-05-03 13:22:47 +02:00
Alessio Morale
c227686854
uncrustify
2015-05-02 20:27:28 +02:00
RS2K
2fca0b1d9b
OP-1835 - Motor Constraints for 15.02.02 - Quick fix to disable clipping. Bit of code not in the original fix I had to deal with.
2015-05-02 13:11:40 -05:00
RS2K
57d062ff67
OP-1835 - Motor Constraints for 15.02.02
...
OP-1835 - Motor Constraints for 15.02.02
2015-05-02 12:55:43 -05:00
Philippe Renon
9a312ef115
uncrustified
2015-05-02 16:46:35 +02:00
Philippe Renon
b4b93bee93
Merge remote-tracking branch 'origin/rvonlehe/OP-1740_UAV0_GetSetFunctionsTakeEnum' into next
2015-05-02 16:34:15 +02:00
abeck70
b479bd5436
OP-1848 altvario TxPID support
2015-05-02 23:57:18 +10:00
abeck70
21c54c3a37
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1848r-altvario
2015-05-01 22:59:36 +10:00
abeck70
b4d727db98
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1863-rate-maxpitch
2015-05-01 21:53:35 +10:00
Laurent Lalanne
11e83bd0e8
OP-1869 Analog Airspeed sensor : Allow scale (voltage divider), change alpha/LowPassFilter behavior
2015-05-01 13:00:36 +02:00
m_thread
c4c60c897b
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into next
2015-05-01 09:53:35 +02:00
m_thread
b8653d44da
Merge branch 'thread/OP-1837_SRXL_Cleanup' into next
2015-05-01 09:46:32 +02:00
Cliff Geerdes
dad8f40c4d
OP-1840 Remove reference to unreleased hardware
2015-05-01 02:49:15 -04:00
Cliff Geerdes
c365bd3032
OP-1840 Removed unused debug .h and update comments
2015-05-01 02:46:38 -04:00
abeck70
87f521bde3
OP-1867 autoland
...
build fix
2015-04-30 23:11:32 +10:00
abeck70
0eb84cd8f6
OP-1867 pathplanner autoland
...
Setup land with descent rate set from flight mode settings.
2015-04-30 22:54:38 +10:00
abeck70
17b8ccd6bb
Merge branch 'next' of ssh://git.openpilot.org/OpenPilot into abeck/OP-1858-autotakeoff
2015-04-30 17:34:33 +10:00
Cliff Geerdes
f331ca0daf
OP-1840 CC3D wouldn't build and update some comments
2015-04-30 01:27:19 -04:00
Cliff Geerdes
48bea16ab9
OP-1840 GPS serial improvements initial coding
2015-04-29 23:46:47 -04:00
Alessio Morale
82c0cba664
Merge remote-tracking branch 'origin/amorale/OP-1841_serial_telemetry_issue' into next
2015-04-29 19:45:11 +02:00
abeck70
d6de7803e1
OP-1858 autotakeoff pathplanner fixes
2015-04-29 20:27:30 +10:00
abeck70
09e2c6f00e
OP-1863 RateTrainer
...
Initial commit for code review
2015-04-28 21:54:58 +10:00
abeck70
b14a966088
OP-1858 autotakeoff and pathplanner
...
1. Allow arming in pathplanner
2. Typo in comment
2015-04-28 20:54:44 +10:00
abeck70
210b15db4d
OP-1858 autotakeoff in pathplanner
...
1. Allowing arming in pathplanner
2. Takeoff activation requires throttle to be above 30%
3. Takeoff occurs at the current/actual position and rises vertical to the settings altititude.
4. The details of the takeoff waypoint are effectively ignored - this is a simplicifcation to avoid having to have pathplanner inject a flyvector command from the current location to the waypoint
5. We hard code the condition check for autotakeoff as only one mode is supported.
2015-04-27 23:01:47 +10:00
samguns
09a00f8990
Merge branch 'rel-15.02.02' into samguns/zh_CN_GCS
2015-04-27 11:56:25 +08:00
m_thread
1f7a8d7ef1
OP-1837 Fixed a wrongly named config.
2015-04-27 01:05:47 +02:00
Richard von Lehe
d22b96d24b
OP-1740: Force latest Pathfollower changes to use uavobj enums.
2015-04-26 17:46:49 -05:00
Richard von Lehe
f3611591e0
Merge branch 'next' into rvonlehe/OP-1740_UAV0_GetSetFunctionsTakeEnum
...
Conflicts:
flight/modules/PathFollower/inc/vtollandcontroller.h
flight/modules/PathFollower/vtollandcontroller.cpp
flight/modules/PathFollower/vtollandfsm.cpp
2015-04-26 17:45:36 -05:00
Steve Evans
5c5c8b5947
OP-1849 Uncrustify
2015-04-26 21:45:43 +01:00
m_thread
8d4fe80388
OP-1837 Uncrustify
2015-04-26 21:08:54 +02:00
Steve Evans
e89356deb2
OP-1849 Invert DTR and initialise
2015-04-26 14:18:40 +01:00
m_thread
b0b1a42aec
OP-1837 This change adds support for the Multiplex SRXL v1 and v2 protocols.
...
Protocol version is autodetected and 12 or 16 channels are supported.
SRXL is available on Flexiport of Revolution board.
2015-04-26 15:04:52 +02:00
m_thread
f11285ea16
Added new helper macros to performance counters.
2015-04-26 14:33:25 +02:00
Steve Evans
25b0b3df0f
OP-1849 For Revo put DTR on pin 9 of FlexIO port
2015-04-26 11:26:04 +01:00
Steve Evans
7445add280
OP-1849 Hooks all in place for CDC line state changes to drive port GPIO for DTR
2015-04-26 03:05:47 +01:00
Alessio Morale
6d9bb8a287
OP-1857 - Enable PPM On Flexi Port
2015-04-25 20:21:56 +02:00
Steve Evans
0aede91547
Merge branch 'next' into steve/OP-1849_update_minimosd_via_usb
2015-04-24 22:49:02 +01:00
Steve Evans
7f93340f7f
OP-1849 Initial commit
2015-04-24 22:46:07 +01:00
abeck70
e36ab50040
OP-1838 altvario
...
Fixes and tidyup.
TODO:
1. Fix UI for sliders
2. Disable vtol tuning on stabi input
3. Altitude loss feedback
2015-04-23 22:49:12 +10:00
abeck70
443b3742cc
OP-1848 altvario
...
1. Build fixes
2. Additional UI components.
2015-04-23 21:54:20 +10:00
abeck70
0d77cd95d9
OP-1848 altvari0
...
1. build fixes
2. Updated ui to use updated uavo names in altitude settings that align to the naming in vtol settings
3. Moved call the thrust altvario to pre application of PIDs for 3d axes to allow for later coupling.
2015-04-23 21:13:00 +10:00
abeck70
d469a754bf
OP-1848 ready for review
...
AltVario:
1. Uses new PID scheme
2. Runs at the outer loop rate to save CPU cycles
2015-04-23 15:51:09 +10:00
abeck70
955f314541
OP-1848 altvario rewrite - initial checkin
...
TODO: 1) update uavos 2) check dT
2015-04-23 15:46:47 +10:00
James Duley
00818f3161
OP-1851 Missing static keyword:
...
Added static to header functions that were missing it
2015-04-22 11:27:47 +12:00
Steve Evans
79339d677f
Merge branch 'steve/OP-1803_s.bus_dropped_frames' into steve/OP-1849_update_minimosd_via_usb
2015-04-21 07:44:50 +01:00
Steve Evans
d28831008f
OP-1803 Return link quality of zero rather than throw an exception if no receiver if the receiver port is undefined
2015-04-20 21:40:42 +01:00
Alessio Morale
ab36dcbdee
Merge remote-tracking branch 'origin/rel-15.02.02' into next
2015-04-20 14:54:07 +02:00
Alessio Morale
1162c0afb2
Merge remote-tracking branch 'origin/master' into next
2015-04-20 14:53:13 +02:00
