Laurent Lalanne
8d2acc6de2
LP-600 Increase SYSTEM and DIAG_TASKS stack size
2018-08-07 13:23:34 +02:00
Vladimir Zidar
b2f548b2ed
LP-173 Add settings initcall type. Add SETTINGS_INITIALISE_ALL to board files. Remove all manual settings objects initializations.
2017-10-17 13:25:25 +02:00
Brian Webb
4e6077ca2a
LP-548 Removes OPLinkReceiver from coptercontrol and fixes setting of OPLinkReceiver RSSI and quality on revolution and sparky2.
2017-09-04 12:16:48 -07:00
Brian Webb
59d20ee752
LP-548 Moves PIOS_OPLINK_RCVR_TIMEOUT_MS to pios_oplinkrcvr.c and adds oplinkreceiver and gcsreceiver modules to coptercontrol.
2017-09-04 11:25:06 -07:00
Brian Webb
1627eb3882
LP-548 Adds OPLInkRcvr to several more FCs, uncrustify, and fixes a few comments.
2017-09-04 09:44:36 -07:00
Brian Webb
9356ac91da
LP-548 OPLink will output OPLink receiver objects if mode is set to control or data and control and PPM output is not configured. Also adds support for OPLInkReceiver to all FCs.
2017-09-03 18:11:46 -07:00
Brian Webb
4ee7249b4a
LP-540 Adds support for ms5607 and ms5637 to the ms5611 driver and renames it ms56xx.
2017-07-08 09:14:58 -07:00
Vladimir Zidar
fb696dc893
LP-512 Remove unused files used for obsolete win32 and osx simulator targets.
2017-05-30 06:21:29 -07:00
Vladimir Zidar
01f5baaed2
LP-480 Removed PIOS_BOARD_USART_Ioctl() and moved inverter handling to pios_usart directly. Handling is now conditionally built in based on PIOS_USART_INVERTER_PORT define.
2017-04-25 13:11:37 +02:00
Vladimir Zidar
3d876d7035
LP-480 Removed RadioAuxStream function from PIOS_BOARD_IO_Configure_RFM22B(), added another function to configure radioaux from hwsettings (revo & sparky2 only).
2017-04-24 16:10:18 +02:00
Vladimir Zidar
9eb1f3b5e5
LP-480 Moved sensors initialization to pios_board_sensors.c
2017-04-24 13:03:07 +02:00
Vladimir Zidar
ddc4f3d855
LP-480 coptercontrol build ok
2017-04-24 12:55:10 +02:00
Vladimir Zidar
64bf884f96
LP-391 Changed PIOS_COM_Init buffer len parameters to uint16_t type. Fixed simposix pios_board.c GPSPORT_GPS init incorrectly passing -1 to PIOS_Board_configure_com() which was on some platforms converted to large unsigned value.
2016-11-26 21:51:29 +01:00
Vladimir Zidar
107aa2170e
LP-391 This fixes issue with negative size (-1) passing from PIOS_Board_configure_com() to PIOS_COM_Init().
2016-08-30 02:03:10 +02:00
Laurent Lalanne
34f55ffbe2
LP-298 Use PIOS_Board_configure_ibus() for all boards - Missing define for RevoNano
2016-08-05 20:49:34 +02:00
Laurent Lalanne
5895468f08
LP-298 Port Ibus Input driver from dRonin - Not tested
2016-08-03 19:09:05 +02:00
Vladimir Zidar
873950b071
LP-364 Added MAVLink support to remaining target boards: sparky2, revonano and coptercontrol.
2016-07-24 22:26:29 +02:00
Vladimir Zidar
a0e7859dd1
LP-365 replace com port boilerplate code with calls to PIOS_Board_configure_com()
2016-07-21 23:52:23 +02:00
Laurent Lalanne
b6ed0d9c9c
LP-326 Increase CC3D Receiver stask size
2016-05-31 08:05:12 +02:00
Vladimir Zidar
e12967e45a
Merge remote-tracking branch 'upstream/next' into LP-291_port_UAVOMSPBridge_from_dRonin
2016-05-15 22:16:47 +02:00
Lalanne Laurent
c3f0d693b5
Merged in alessiomorale/librepilot/amorale/LP-150_slower_attittude_est_cc (pull request #239 )
...
LP-150 slower attittude estimation for CC/CC3D
2016-05-09 12:21:56 +02:00
Alessio Morale
e14e5febe2
LP-150 - prevent stab error conditions
2016-05-03 01:00:28 +02:00
Alessio Morale
6bd6ef5be1
LP-150 - Run attitude estimation at a configurable fraction of gyro sample rate for CC/CC3D
2016-05-03 01:00:06 +02:00
Laurent Lalanne
214ae849a2
LP-233 Add MultiShot 5 - 25µs pulses
2016-05-02 20:24:03 +02:00
Laurent Lalanne
32a6de6b79
LP-233 Support OneShot42
2016-05-02 20:24:03 +02:00
Vladimir Zidar
f04d44de30
LP-291 Added MSP support to all boards (revolution, revonano, revoproto, discoveryf4bare and coptercontrol)
2016-04-22 03:30:38 +02:00
Alessio Morale
089c224514
Merged in alessiomorale/librepilot/amorale/LP-96_cpu_idle_counter (pull request #37 )
...
LP-96 Updated CPU idle counter / LP-97 unify CopterControl and Revolution init process
2016-02-19 20:19:05 +01:00
Cliff Geerdes
2ae1f9c63d
LP-212 DJI GPSMag support
2016-02-16 15:23:36 -05:00
Fredrik Arvidsson
c06fb0249f
LP-104 LP-196 Uncrustify and some other formatting issues fixed.
2016-01-10 10:12:54 +01:00
Fredrik Arvidsson
02c981388a
Merge branch 'thread/LP-196_Jeti_Ex_Bus_15.09' into thread/LP-104_LP-196_HoTT_and_Ex.Bus_Support_15.09
...
# Conflicts:
# flight/targets/boards/coptercontrol/board_hw_defs.c
# flight/targets/boards/coptercontrol/firmware/pios_board.c
# flight/targets/boards/revolution/board_hw_defs.c
# flight/targets/boards/revolution/firmware/inc/pios_config.h
# flight/targets/boards/revolution/firmware/pios_board.c
# flight/targets/boards/revonano/firmware/inc/pios_config.h
# flight/targets/boards/revonano/firmware/pios_board.c
# shared/uavobjectdefinition/hwsettings.xml
# shared/uavobjectdefinition/manualcontrolsettings.xml
# shared/uavobjectdefinition/receiveractivity.xml
2016-01-09 16:59:24 +01:00
Fredrik Arvidsson
c48c46b8ef
LP-196 Cleaned up some configuration. Ex.Bus only available on Flexiport.
2016-01-09 16:07:13 +01:00
Fredrik Arvidsson
6a3a822c87
LP-104 Cleaned up configuration. Only Allow HoTT on flexi port.
2016-01-09 15:50:52 +01:00
Fredrik Arvidsson
359266ab7a
LP-104 Removed support for HoTT on Main port on coptercontrol target since it does not work.
2016-01-07 13:01:46 +01:00
Fredrik Arvidsson
08237a1ff5
LP-196 Removed EX.Bus on Main port for CopterControl target since it is not working.
2016-01-06 17:17:02 +01:00
Fredrik Arvidsson
3e920bc5bc
LP-196 Added driver for Jeti EX.Bus protocol. Added support for CopterControl target on Main and Flexi port. This is WIP and not tested yet.
2015-12-26 12:29:04 +01:00
Fredrik Arvidsson
5273df263c
LP-104 Reverted stack size for receiver module after testing.
2015-12-20 21:11:15 +01:00
Fredrik Arvidsson
7a95050381
LP-104 Added missing code to receiver.c to detect receiver activity. This probably caused a crash on any activity of the HoTT receiver.
...
Added 40 bytes to the receiver stack.
Added options to receiver activity.xml uavo definition.
2015-12-20 13:36:45 +01:00
Fredrik Arvidsson
e6d4638201
LP-104 Adds support for Graupner HoTT SUMD/SUMH serial protocol used by receivers on Main and Flexi port.
...
Still work in progress. Only supports CopterControl target and crashes on input :(
2015-12-20 11:08:15 +01:00
Alessio Morale
70faa04b0a
LP-97 - Move board init function declarations to a pios_board_init.h, fix some headers
2015-11-08 18:47:31 +01:00
Alessio Morale
b88681c69f
LP-97 - Move the common Init process within the System module (coptercontrol/revolution)
2015-09-03 23:40:24 +02:00
James Duley
e308039206
LP-99 Decouple flight build
...
Moved flight make code into flight/Makefile. This should speed up
rebuilds for GCS and keeps the top level Makefile tidier.
Change-Id: I9d33cb5c223b6a8ed2821435a5d63ecf4b97c6b8
2015-09-02 19:34:58 +12:00
Alessio Morale
538a137bf6
Merged in f5soh/librepilot/laurent/LP-92_Feed_forward_remove (pull request #33 )
...
Laurent/lp 92_feed_forward_remove
2015-08-21 13:35:10 +02:00
Roy Bekken
ad84547637
Update all changed files against GIT log with copyright headers consistency.
2015-08-19 16:15:58 +02:00
Laurent Lalanne
99975bf9b0
LP-92 Reduce Actuator stack size - Increase System stack size for diags
2015-08-14 10:59:53 +02:00
m_thread
9ba63ea124
LP-69 Added SRXL support to CopterControl targets.
2015-07-30 15:30:59 +02:00
Alessio Morale
6a60910e19
LP-05: fix for toplevel makefile changes
2015-07-19 14:07:48 +02:00
a*morale
62a585c188
LP-5 - Include missing UAVOs, add removed cc fields into hwsettings
2015-07-15 00:07:50 +02:00
a*morale
dd6c6054e9
Revert "OP-1810 FOC"
...
This reverts commit 92e50c2ead
2015-07-15 00:07:50 +02:00
abeck70
92e50c2ead
OP-1810 FOC
...
Squashed commit for clean commit as discussed in code review
Uncrustify
2015-05-13 17:19:51 +10:00
Alessio Morale
6d9bb8a287
OP-1857 - Enable PPM On Flexi Port
2015-04-25 20:21:56 +02:00
