James Cotton
13e7733e5f
Merge branch 'revo-mini' into revo
2012-09-12 02:30:10 -05:00
a*morale
cf7aea6499
Support for Led Outputs as actuator channels 9&10.
...
Added the ARMING LED and INFO LED option for actuator channel
2012-09-10 20:14:24 -05:00
a*morale
316e02612e
mapped LED1&2 ports to output 9&10 so that it is possible to use as accessory or pwm buzzer
2012-09-10 20:14:15 -05:00
James Cotton
68fa464ccf
RM: Make the direction of the TX/RX lines come from the configuration file
2012-09-04 23:22:56 -05:00
James Cotton
a33f415866
RM DSM: Get DSM working on the mainport
...
Because of the inverter this does not support binding on this port.
2012-08-31 11:08:43 -05:00
James Cotton
300cee44b4
RM SBUS: There is no pull down on the inverter direction so when not SBUS must explicitly set to off.
2012-08-31 11:01:34 -05:00
James Cotton
d333e24a43
RM: Swap to using the CC_ flags for the flexi port too.
2012-08-31 10:30:00 -05:00
James Cotton
b1bd6d8583
PIOS_RFM22b: No need to set the SPI clock speed in the RFM22b module - it can be set by the driver configuration.
2012-08-26 00:00:39 -05:00
James Cotton
27c46c78b2
Increase the RFM22b/Flash rate to 10MHz which is within tolerance for both.
2012-08-25 23:17:53 -05:00
James Cotton
4014445cc9
Fix the IRQ line for the RFM22b
2012-08-25 19:10:16 -05:00
James Cotton
9e25e887c2
Temporarily disable flash chip and configure SPI for modem.
2012-08-25 18:43:13 -05:00
James Cotton
ad7a9b9cc3
Switch the order of the SET_RC pins for flash and rfm22b
2012-08-25 17:49:15 -05:00
James Cotton
b95a78cde5
Roll back changes on the revo target
2012-08-25 17:33:14 -05:00
James Cotton
76bdb190d8
Link in the rfm module to the target
2012-08-25 17:27:17 -05:00
James Cotton
982750a58f
Merge remote-tracking branch 'revo/brian/revo_link' into revo-mini
...
Conflicts:
ground/openpilotgcs/src/plugins/plugins.pro
2012-08-25 15:05:47 -05:00
James Cotton
5c34412200
Merge remote-tracking branch 'revo/amorale/revolution_baro_fixes' into revo-mini
2012-08-25 14:55:10 -05:00
James Cotton
2edc976168
Fix the VBUS sense pin
2012-08-25 13:46:55 -05:00
Brian Webb
415b86879c
Added the RFM22B driver to the Revo to support an RFM22B radio on the external SPI port.
2012-08-25 11:45:43 -07:00
Brian Webb
fad32dcc29
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
2012-08-25 11:41:32 -07:00
James Cotton
ce5ef7edf3
Update the serial ports and receiver and servo ports
2012-08-25 13:19:23 -05:00
James Cotton
05e2e24bcb
Reconfigure the SPI ports.
2012-08-25 12:38:44 -05:00
James Cotton
60160001c6
Copy the revo project to revo mini
2012-08-25 12:23:54 -05:00
a*morale
257b00a400
Fixed a typo on I2C speed for the MS5611
2012-08-25 12:28:25 +02:00
James Cotton
44dc01126e
Merge branch 'next' into revo
2012-08-12 16:12:54 -05:00
Stacey Sheldon
ef0c12b1b6
hid joystick: emulate a USB HID joystick using RC Transmitter
...
Adds a new RCTransmitter setting for the USB HID interface which
emulates a USB HID joystick. The scaled RC receiver channels
from any RCVR protocol are passed through to the various emulated
joystick controls.
The main use for this feature is to allow you to use your own RC
transmitter with any RC simulator on a PC.
This is known to work with CRRCsim but should work with any simulator
that supports joystick input.
2012-08-05 21:45:27 -04:00
James Cotton
88bb73f508
Fix the PIOS_OVERO dma IRQ configuration
2012-07-20 11:14:27 -05:00
James Cotton
6a3c067c18
Zero out the packet counter when pios_over is initialized.
2012-07-20 10:45:20 -05:00
James Cotton
8fc2d10ea6
Get the pios_overo driver for pios_com compiling
2012-07-20 09:32:22 -05:00
James Cotton
a6ba379af9
PIOS_OVERO driver which handles the communications to the overo and ensures the
...
data stays in frame.
2012-07-17 15:34:54 -05:00
James Cotton
dc7fe1bdd8
Try and get pios_gcsrcvr working on simulation and revo for testing RTH. Had
...
to include uavobjectmanager.h manually which was weird
2012-06-04 09:48:05 -05:00
Brian Webb
df8a5f8f27
Changed update period for PPM inputs on the PipX. Fixed LED code.
2012-05-31 18:56:07 -07:00
Stacey Sheldon
decd92f21d
pipx bu: apply recent LED changes so BU image builds again
2012-05-27 21:37:59 -04:00
Stacey Sheldon
261e65a6f2
revo bu: apply recent LED changes to revo so BU builds again
2012-05-27 21:35:52 -04:00
James Cotton
5a6e02a688
Merge remote-tracking branch 'origin/Brian-PipXtreme-V2' into next
2012-05-25 20:37:23 -05:00
Brian Webb
b824c87056
Merge remote-tracking branch 'origin/next' into Brian-PipXtreme-V2
2012-05-25 06:26:29 -07:00
Stacey Sheldon
d2615cac96
hw_defs: hide board-rev differences in LED definitions
...
Every board has at least one LED (HEARTBEAT). Not all
users of LEDs need to be directly aware of which LED
configuration to choose when there may be more than one
possible configuration.
Hide the details of the differences between LEDs used in the
different HW revs for CC. This will allow generic code to
run on CC and CC3D without being exposed to the details of
the different pins used for the LEDs.
2012-05-23 00:22:11 -04:00
Stacey Sheldon
b97aba834a
cc3d leds: move pin remapping into led definition
...
The LED driver supports GPIO remapping. No need to
do the remapping outside of the LED definition.
2012-05-23 00:12:51 -04:00
Corvus Corax
5727d5714e
Created new "SimPosix" board and ported PiOS.posix to revolution API and more "standard like" configuration akin to other "boards"
2012-05-22 18:32:27 +02:00
Brian Webb
6e359c5933
Added PipX to Windows .inf file and updated ppm port definitions.
2012-05-21 19:22:46 -07:00
Brian Webb
e57543ec29
Updated USB on PipX to latest CDC changes.
2012-05-20 19:34:43 -07:00
Brian Webb
6cb13aa2ba
Fixed failed merge with next.
2012-05-20 18:36:08 -07:00
Brian Webb
2f1a9e3e7d
Added PPM input to the PipXtreme. Also added configurable GCSReceiver timeout.
2012-05-20 18:30:37 -07:00
Stacey Sheldon
48cb20dc81
hid+vcp: change default USB descriptor to HID+VCP
...
Now that we have a USB descriptor for HID+VCP that works
on Ubuntu 11.10, MacOS 10.7.3, Win7-SP1-32bit,
WinXP-SP3-32bit, Win7-SP1-64bit.
VCP is known to not work on WinXP without service pack 3.
2012-05-19 16:06:30 -04:00
Brian Webb
93ec7c11a6
Fixed race condition on getting packets.
2012-05-15 19:38:14 -07:00
Brian Webb
454144f46c
Pairing and saving settings working.
2012-05-06 20:47:21 -07:00
Brian Webb
352471857f
Reverted USB configuration and switched all non-blocking COM calls to blocking, which appears to help prevent lockups now that all sends are in a different thread.
2012-05-06 15:07:07 -07:00
Brian Webb
ef4828032b
Fixed failed merge with next.
2012-05-06 12:38:13 -07:00
Brian Webb
3cf4fe6512
Reverted some USB changes.
2012-05-05 10:10:40 -07:00
Brian Webb
480371a43e
Resolving merge with origin/next
2012-05-05 09:53:54 -07:00
Brian Webb
e83fec0463
Merged latest origin/next.
2012-05-05 09:40:44 -07:00
