rooty/LibrePilot
1
0
Fork 0
mirror of https://bitbucket.org/librepilot/librepilot.git synced 2024-12-11 19:24:10 +01:00
Code Issues Releases Activity
2,341 Commits 5 Branches 8 Tags 266 MiB
7b50e09eb9
Commit Graph

36 Commits

Author SHA1 Message Date
peabody124
ed11e64bb2 OP-251 Watchdog: Get rid of the old extra watchdog module and instead have 
tasks directly update a flag for each module (which they register) and when all
flags set clear the watchdog then.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2365 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-10 00:16:30 +00:00
vassilis
b851c11f53 Flight/Stack sizes: Reduced task stack sizes to free-up memory in preparation of the scripting release. If the firmware is unstable there might be a possible stack overflow, test carefully! 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2350 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-09 00:03:19 +00:00
vassilis
407e660c97 Flight/TaskMonitor: Create TaskMonitor library, used to monitor the remaining task size of all running tasks. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2349 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-08 23:43:34 +00:00
peabody124
3e9ee37c73 Flight/ManualControl: Require the roll signal to only go to 0.90 to arm and 
disarm

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2332 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2011-01-05 10:34:39 +00:00
peabody124
d218e18ded AHRS: Make arm timeout of 0 disable feature for planes. Don't want them arming 
out.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2205 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-08 20:07:34 +00:00
peabody124
a04e33ccc6 OP-192 Flight/ManualControl: Add an ArmedTimeout field to the 
ManualControlSettings so that planes can disable the timeout
feature for gliding (holding roll on a plane not so good).

Note: This will require you to reconfigure your ManualControlSettings

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2185 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-04 17:34:16 +00:00
peabody124
4f21bee0d7 OP-192 Flight/ManualControl: Correctly convert to ms in timeout code so system 
will automatically disarm after 30 seconds without motor.  This behavior will
need to be parameterized for planes which might idle for a while.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2181 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-12-01 22:12:01 +00:00
peabody124
834eecfc1f OP-200 Flight/Watchdog: Have flag that is set from actuator, ahrs_comms, manual 
and stabilization that is monitored by watchdog.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2078 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-05 14:28:21 +00:00
peabody124
f950b9f6c0 Flight/ManualControl: Make it so the disarmed signal itself changes when GCS 
lost.  Warning though: it takes ~5-10 seconds for the flight telemetry status
to go from connected so this solution still isn't great.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2070 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-04 02:30:53 +00:00
peabody124
7bdd900409 Flight/Manual: Cleaner solution to deal with timer wraparound 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2069 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-04 02:30:51 +00:00
peabody124
1f87715719 OP-192 Flight/ManualControl: Add a timeout to the armed signal. Leaving throttle < 0 
for 30 seconds disables it.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2068 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-11-04 02:30:49 +00:00
les
6d6ec37474 Manual control: Changed 'Position' stabilization mode to 'Attitude' 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1944 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-11 17:58:11 +00:00
peabody124
4e6f100ae5 Flight: Swap to Les' code for main line 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1920 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-08 15:38:23 +00:00
les
1e26ca11ee Manual control: Added some extra room at throttle zero when detecting a faulty signal 
Before, moving your throttle trim slightly could cause ManualControl to think the receiver was not connected

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1885 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-05 14:50:03 +00:00
peabody124
ba3ecada1d Flight/ManualControl: Implemented settings to change what the Mode switch does 
so it can also change parameters of Stabilization.  Please check your aircraft
behavior with this patch, but default behavior should be unchanged.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1878 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-04 19:48:09 +00:00
peabody124
a9495e2cbb UAVObjects/AttitudeSettings: Remove unused object, moving data to AHRSettings. 
Added attitude bias to AHRSSettings.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1855 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-10-03 18:14:34 +00:00
peabody124
6d0df704a7 Flight/Modules: Corrected code to use tabs 
find ./flight/OpenPilot/Modules/ \! \( -name '*~' -a -prune \) -type f    |
xargs -I{} bash -c 'echo {}; dos2unix {}; gnuindent -npro -kr -i8 -ts8 -sob -ss
-ncs -cp1 -il0 -hnl -l150 {};'

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1776 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-27 07:28:34 +00:00
peabody124
3b015b41c5 Flight: Got a much nicer arming/disarming system going. Made it a separate flag in the end to allow testing the stabilization code with motors not running. Also changes maxRoll/maxPitch/maxYaw to uint8 to keep object size smaller - no reason for float precision for this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1660 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:11 +00:00
peabody124
a6e71177e4 AHRS: Yaw stabilization now supports rate stabilization or heading hold. Also need to cleanly support rate stabilization on all the other axis. Les suggested this be in manual mode which will require changing the logic somewhat (essentially for vtol it will always be running through the Stabilization module) in an aircraft dependent manner. An alternative would be a stabilization flag indicating to do full attitude hold, attitude + yaw stabilization, or all axis gyro stabilization. This would be my preference. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1659 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-16 15:41:08 +00:00
peabody124
e90e714c2b Flight: Tweaked the throttle handling and VTOL use of it to make sure engines can be shut off easily in stabilization mode. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1593 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:49 +00:00
peabody124
5d1ebf76ea Flight/VTOLmixer: Fix bug in mixer that messed up roll mixing. Also changed minimum to -1 so that neutral can be position motors come on and -1 the off position. Also made failsafe throttle value -1 to be consistent. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1591 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-12 02:54:44 +00:00
peabody124
e260077247 Flight/ManualControl: Making failsafe test (which must explicitly look at receiver inputs instead of throttle values in case of reversal) also consider readonly flag to detect GCS control. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1545 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-06 02:58:41 +00:00
peabody124
d3b677298c Flight/ManualControl: Added a hysteresis loop to the manual control connection/disconnection status. I seem to get glitching without it - probably because of the receiver catching noise. It still occasionally glitches but I don't want to make it longer. Probably should be an adjustable setting. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1527 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:04 +00:00
peabody124
c21d058110 Flight: Added ability to use a third accessory input. Currently using that to select tuning roll/pitch bias and PID tuning. I also _STRONGLY_ recommend if you enable these accessory channels (and thus these features) you make the saved meta data for the StabilizationSettings and AttitudeSettings read-only, so only on flights where you mean to can you change these settings. I'm also not convinced about the interface - it seems like flicking TX switches to get into adjustments is a recipe for disaster. Probably need to just control through GCS. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1526 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:08:02 +00:00
peabody124
45e8131a30 Flight: Added ability to use additional TX inputs to tune attitude bias. Note this form of the calibration is temporary and will likely be replaced by a rotation matrix to deal with more general rotations. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1525 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 17:07:59 +00:00
peabody124
b4ff14b725 Ground/GCSControl: Swapped sign conventions of sticks to match the sign convention of roll/pitch/yaw. I.e. now right on the roll causes a + roll, pulling down on the pitch causes + pitch. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1518 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-04 02:19:06 +00:00
peabody124
d3bb821e82 Flight/ManualControl: Change to ManualControl module to make warning only kick in if input is less than the max and min for throttle. Disable going to (unimplemented) auto mode. Commiting based on one yay and no nay. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1505 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-09-02 16:33:02 +00:00
andrew
3c6d9d6976 manual control was mapping tx input as -180º -> 180º for AttitudeDesired.Yaw. 
The Wiki (http://wiki.openpilot.org/Unit_Standards) states this should be 0 - 360º
Made the code match the wiki.

git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1463 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-30 01:16:00 +00:00
peabody124
a0b21bef45 Flight: Got read only check working for UAVObjects and modified the ManualControl Module to use it. Edouard - please check over this. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1427 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-27 00:15:48 +00:00
peabody124
2db294caf7 OP-125 Flight: Changed GPS stack size to a bit closer to what the internal model needs to get rid of out of memory warning, but it could still use 1k less if it pulled all the constants from flash when needed and computed the time difference when called. Also changed ManualControl so it checks the active control values to determine the warning, so if GCS is controlling the warning light goes out. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1387 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 06:03:19 +00:00
cwabbott
19f6db79be Added ManualControl to the win32 and posix makefiles. Also fixed a compiler error about "No newline at end of file." 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1379 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-23 00:52:56 +00:00
peabody124
0eac218572 Small update to make ManualControl get the command after setting it. That way if the flight system isn't meant to overwrite it (i.e. flying via GCS) it uses the right value. I think this should actually be the default behavior of UAVObject set... awaiting feedback from Vassilis. 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1214 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-08-05 19:56:36 +00:00
peabody124
d928676f5e More documentation updates, standardizing format to include addtogroup at the beginning of headers so files are associated with modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1121 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 19:53:35 +00:00
peabody124
1cd81e211f Added Doxygen comments for OpenPilot modules 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@1101 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-07-16 01:02:34 +00:00
vassilis
6414887dcc Flight/ManualControl Added support for reversing inputs 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@685 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-30 01:58:15 +00:00
vassilis
6b6740109e OP-32 Flight Initial release of Actuator (ServoOut) and ManualControl (ServoIn) modules, still work in progress (not fully tested). 
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@632 ebee16cc-31ac-478f-84a7-5cbb03baadba
 2010-05-17 01:58:38 +00:00