It is not yet fully functional as a top-level Qt-Creator project file (some dependencies need to be fixed).
So Qt-Creator users, please use the following sequence to build all for the 1st time:
1) Run qmake in ground (generated gcs Makefiles lack uavobject targets - known problem);
2) Build in uavobjgenerator;
2) Build in uavobjects;
3) Run qmake in ground again (IMPORTANT - now correct gcs Makefiles will be generated).
Now you may build openpilotgcs. If uavobjects are added/removed, you need to repeat all steps after uavobjects.pro modification.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2536 ebee16cc-31ac-478f-84a7-5cbb03baadba
This meta-project allows qt-creator users to open
and configure a single project and to build all
required software to produce a GCS. This includes
regenerating all uavobject output.
NOTE: To use this meta-project, you MUST perform these
steps once for each SVN checkout:
- Open <top>/ground/ground.pro in qt-creator
- Select the "Projects" tab
- Under Build Settings/General heading, click "Show Details"
- Activate "Shadow Build"
- Set your Build Directory to <top>/build/ground
<top> = The full path to the base of your svn tree which should
contain "flight", "ground", etc.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2531 ebee16cc-31ac-478f-84a7-5cbb03baadba
This will be used by a master project for qt-creator to
allow it to automatically generate the uavobject output
for qt-creator users.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2530 ebee16cc-31ac-478f-84a7-5cbb03baadba
This will allow us to create a simpler project file
for those that use the qt-creator gui.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2529 ebee16cc-31ac-478f-84a7-5cbb03baadba
This will allow us to build a parent project for
qt-creator that sits above both openpilotgcs and
uavobjgenerator so that we can build both projects
at the same time.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2528 ebee16cc-31ac-478f-84a7-5cbb03baadba
Move generated Java UAVObject output into the common synthetic
tree for all UAVObject output.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2527 ebee16cc-31ac-478f-84a7-5cbb03baadba
The UAVObject definition (.xml) files are used by both the
GCS build as well as the flight software builds.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2526 ebee16cc-31ac-478f-84a7-5cbb03baadba
The UAVObject generator is intended to be a standalone tool.
As such, it doesn't belong under the openpilotgcs directory.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2525 ebee16cc-31ac-478f-84a7-5cbb03baadba
Also note that the command line option to the uavobjectgenerator
binary for matlab has changed from "mathlab" to "matlab".
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2523 ebee16cc-31ac-478f-84a7-5cbb03baadba
A test script is statically linked (will eventually be uploaded by the GCS and stored in the VM), it can be found under: Modules/FlightPlan/flightplans/test.py
To start the script send the FlightPlanControl object with the Start command, to stop send the Stop or Kill commands.
Next release will be the OpenPilot python libraries and access to UAVObjects from the script.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2480 ebee16cc-31ac-478f-84a7-5cbb03baadba
semaphores for sharing the bus between the flash chip and this though.
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2473 ebee16cc-31ac-478f-84a7-5cbb03baadba
1) Added nack counter monitoring
2) Made timeout for getting semaphore in I2C user space code use the one from
driver and record timeouts. This does not influence timeouts in the non
FreeRTOS case
3) Remove case block from the error handler so that all bus errors reset the
i2c interface
git-svn-id: svn://svn.openpilot.org/OpenPilot/trunk@2469 ebee16cc-31ac-478f-84a7-5cbb03baadba
