Brian Webb
|
5724fa083c
|
RFM22B: Added link quality calculation based on number of dropped packets. Also added packet error correction, which apparently wasn't being done before.
|
2012-10-04 21:11:40 -07:00 |
|
Brian Webb
|
fad32dcc29
|
Split out the PipX radio interface from RadioComBridge module to a separate Radio module. Now the RadioComBridge module just routes messages between the com ports and handles sending/receiving the PipX UAVOs.
|
2012-08-25 11:41:32 -07:00 |
|
Brian Webb
|
10e52b31c5
|
Added the ability on the PipX to specify if a comport is used to connect to the GCS (ground side), so it will receive status, etc, or UAVTalk (flight side). The data passing in RadioComBridge was also made more uniform, which allows for easier reconfiguration.
|
2012-06-30 10:06:28 -07:00 |
|
Brian Webb
|
861bcc46fe
|
Fixed RSSI reporting on PipX.
|
2012-06-06 21:14:31 -07:00 |
|
Brian Webb
|
4e68f6543e
|
Added tracking of dropped packets to PipX and turned off visible text on signal strength meters.
|
2012-06-04 21:18:13 -07:00 |
|
Brian Webb
|
dd03b0b159
|
Added reporting of stats from the remote modem.
|
2012-05-13 09:34:21 -07:00 |
|
Brian Webb
|
217aad8c37
|
Now using read and write threads for both radio and com ports on PipX. Also cleaned up UAVTalk message handling.
|
2012-05-01 19:14:58 -07:00 |
|
Brian Webb
|
62c5036220
|
Added PipXStatus and PipXSetting UAVobjects and some initial support for them.
|
2012-04-17 17:36:05 -07:00 |
|
Brian Webb
|
4936cd8fd2
|
Added PipXStatus and PipXSettings UAVObjects and added support the sending/receiving UAVTalk objects on the PipX.
|
2012-04-10 20:22:53 -07:00 |
|
Brian Webb
|
f4d886de75
|
Added support for determining when the radio->com link is between UAVTalk packets. This is required to inject UAVTalk messages into the message stream.
|
2012-04-07 18:17:57 -07:00 |
|
Brian Webb
|
0f9f897870
|
Added PPM packet to packet handler, created replacement system module for PipXtreme (PipXtreme module), removed all UAVObjects from PipXtreme, and added parsing of incoming (over USB/COM) UAVTalk stream.
|
2012-04-07 18:17:32 -07:00 |
|
Brian Webb
|
fff93910e2
|
RFM22B device now fully interrupt driven. Packet handeling moved to RadioComBridge module.
|
2012-04-05 20:24:50 -07:00 |
|
Brian Webb
|
823b111d60
|
Added Reed-Solomon error correction to PipXtreme. The code is a slight modification of rsscode (http://rscode.sourceforge.net). Packet acking has also been turned on as the default, so each packet is error corrected, and if errors remain, the packet is NACKed, otherwise it is ACKed. Also temporarily turned off UAVTalk parsing. This was causing the CC to be identified as a PipX due to the PipX sending UAVObjects (I believe) from the system module. The system module is going to have to be modified/replaced for the PipX.
|
2012-03-18 17:43:29 -07:00 |
|
Brian Webb
|
ecdf150946
|
Moved RFM22B code from PipXtreme to pios_rfm22b.c driver. The radio is now passing data.
|
2012-03-18 10:22:05 -07:00 |
|
Brian Webb
|
b34b849453
|
Added start at a modified PipX packet handler.
|
2012-03-15 19:29:54 -07:00 |
|